We make shelves for flowers with our own hands

Indoor plants are a beautiful addition to the decor of a room. They are suitable for absolutely any interior, pleasing to the eye and purify the air in the room. Gardeners love to replenish their pots. And when the space on the windowsill and table runs out, there is no room for things. We have to look for a new habitat for our pets. A wide variety of floor and wall shelves will help the housewife compactly install plants in the right place. And the unusual design of a DIY flower shelf will add originality and brightness to the room.

Indoor plants are a beautiful addition to the decor of a room.

Shelf layout options

Systems can be either single or double. Everything directly depends on the number of flowerpots. By location they are distinguished:

For window sills;

• floor;
• wall (straight and corner);
• for balconies.

An unusual design of a DIY flower shelf will add originality and brightness to the room.
A DIY flower rack is placed in a convenient place. In addition to the room, you can put it on the balcony. And also the configuration can be easily hung in the yard or on windows.

Systems can be either single or double.

Staircase for flowers: how to make it yourself

Assembling a decorative staircase is not that difficult. It can be built not only by people with woodworking skills, but even by untrained teenagers and women. You just need to familiarize yourself in advance with the safety requirements when working with the tools chosen for this purpose.

To make a ladder for flowers with your own hands, you first need to determine a permanent place for it and approximate dimensions. And then think a little and prepare the source material. Since this is still a decorative element, it is not worth making a fully functional model. Therefore, apart from metal corners, nails and screws, no other accessories are required. This, one might say, is a simplified version of the staircase.

Manufacturing stages:

1. Draw a sketch on paper. Calculate the desired dimensions of the entire product and its dimensions. Determine the length of the side boards and shelves. All parts, edges and corners are planed and sanded.
2. The bottom bases of the two side boards are cut at a certain angle. On which the slope of the finished product will depend.
3. On the inside of the side boards, mark the positions of the proposed shelves. Slots are made and placed parallel to the sawn bases. The distance between them should be at least 30 cm. It will turn out quite compact. If plants are planned to be placed on high shelves, the distance between them should be increased.
4. Prepare two racks equal in length to the height of the stairs and attach them to the top of the product. It is worth fixing with corners for reliability. The lower part of the racks and bases are connected with slats, crosswise.

The width of shelves or steps is quite easy to calculate. It should be 10 cm larger than the diameter of the largest flower container. The length of the step is equal to the internal distance between the side boards, to which you need to add twice the depth of the cut made.

You cannot glue the wooden parts of a stepladder together, as the finished product will be unreliable. And under the weight of pots with plants it will collapse very quickly.

The wooden flower stand can be varnished or painted with oil paint. It will fit perfectly into the decor of the chosen room.

You can glue protective strips along the edges of the shelves. They will prevent the pots from slipping if someone accidentally touches or pushes the ladder.

Deciding on design and construction

The lightest and most original configuration is the suspension system. In this version, you can come up with any design and shape. It can be built in the form of a tree or branch. Such a masterpiece can be hung in any convenient place, it does not take up much space and looks harmonious in any interior. Unusual design solutions are very popular:

• configurations in the form of a separate continent or piece of the planet;
• honeycombs, rings, ovals (placed together and separately);
• “ladders”, “Christmas trees” or “twigs”;
• ribbon-shaped.

A DIY flower rack is placed in a convenient place.

There are many options for wall and floor shelves available online. But before you start making the option you like, you need to understand whether it will suit you. How to understand which flower shelf you need?

The configuration is easy to hang in the yard or on windows.

To decide what exactly you need, you need to know a few nuances:

• the number of flowerpots that will be placed on the surface;
• plant species;
• the interior of the room where the shelves for flowers are located;
• the desire and taste of the hostess.

Unusual design solutions are very popular.

These are the main factors that you need to pay first attention to when planning your design.

It is worth remembering that there are flower shelves: single, double and multi-seat. The number of places depends on the number of house plants.

In addition, for a craft to become beautiful, it is not necessary to paint it or attach anything to it.

Single-seat options can only place a flowerpot. Such structures are installed at home and on the street. Climbing house plants look good on them. This type of shelves can be wall-mounted or floor-mounted.

Single-seat options can only place a flowerpot.

The second option is usually hung on the walls. Multi-seat options can accommodate a maximum of 5-7 flowerpots. Their big advantage is their compactness and large capacity.

If the only free place for furniture is a corner. This won't stop us! There are special corner structures that will help us. They fit perfectly into a corner and hold 5-7 flowerpots. Furniture is placed on the walls and floors.

Nothing decorates your home like handmade items.

You can choose any design for the new shelf. Sections can be either rectangular or zigzag. Wall sections can be designed in the form of a tree or branch. If the sections are placed on the street or balcony, they can be painted in a bright shade.

If the only free place for furniture is a corner.

Glass furniture will add style and elegance to the room. It will fit well into any interior. This option is well suited for small rooms, since glass items do not take up space, but, due to their transparency, on the contrary, expand the room.

Variety of designs and placement methods

Externally, the stands look very different, but structurally they can be combined into the following groups:

• One-piece stands . Products not intended for disassembly. Their design is the most reliable and does not cause additional hassle. However, rearranging or transporting a large model may be difficult.

Original solution Source pinimg.com

• Prefabricated . Such models are inferior in strength to solid ones, but if necessary (for transportation or storage) they can be disassembled. Smart manufacturers provide their products with assembly instructions.

Floral arrangement in the interior Source lifescarousel.com

• Mobile . Such models can be considered a subspecies of one of the first groups, but they are more functional and, therefore, more convenient. The wheels that the stand is equipped with allow you to effortlessly move your collection of flowers, whether you are cleaning or rearranging. It is important that such a structure is stable.

On wheels Source wfcdn.com
According to their purpose, flower stands are divided into the following types:

• Floor-standing . Reliable and easy-to-use specimens, in most cases designed for several (sometimes many) plants. They have from one to three or four tiers, and are able to withstand significant loads. Based on their design, there are racks, shelves, screens, and slides. There are beautiful flower stands that resemble a folding ladder.

The main thing is sustainability Source vsecveti.life

• Wall mounted . These models are wall mounted, saving space. Unfortunately, the fasteners are not designed to withstand heavy loads, so placing more than two or three medium-sized flowers on the wall is dangerous. The wall stand is ideal for hanging varieties (Tradescantia, begonia), and there is a place for it in the smallest room.

Everything will fit Source aesdes.org

• Tabletop . Suitable for installation on tables, chests of drawers and other large furniture. Tabletop models often have a multi-tiered or curly shape. A stand designed for large flowerpots will have a harmonious appearance only in a spacious room.

Table idea Source: amazon.com

• Window (balcony) . They are mounted on brackets to a window or balcony railing and often have decorative details. Window models are used when there is a shortage of square meters in the room; They are suitable for light-loving flowers, but in terms of capacity they lag behind floor options. When choosing, you need to check the reliability of the fastenings.

Metal flower girl Source amazon.com

• Angular . Designed to fill a corner, but due to their design, they cannot accommodate many containers with flowers. They are suitable for a small room or balcony, as they use space sparingly. Holding large flowers on them is problematic due to the small distance between the shelves.

Option for a rounded corner Source makler.md
See also: Catalog of companies that specialize in the design and installation of small architectural forms

• Spacers . The stand is mounted between the ceiling and the floor (or window sill). You can make a design with rotation around an axis, which makes it easier to access the plants, and for them to the sun. Installation is simple, but not everyone will agree to install an additional rigid structure in the room.

Stepped garden idea Source ebayimg.com

• Decorative . These often include outdoor models, stands for flowers in the garden made of metal or wood, although there are also, for example, tabletop models for one flower. Externally, such accessories are made in the form of household items: carts, bicycles, wheelbarrows; sometimes household items are adapted to serve as containers for a flower garden. They are convenient because they allow you to accommodate many plants, and at the same time enliven the surrounding landscape.

Outdoor figure stand Source pinimg.com

Vintage wicker flower girl Source pinimg.com

Which material is better to choose

There are several types of raw materials for constructing shelves:

• metal;
• plastic;
• tree;
• glass;
• combined material.

You can choose any design for the new shelf.

Metal structures are very durable and can withstand a lot of weight. This configuration looks expensive and solid. But it requires special care and special treatment, otherwise corrosion may occur and the flower shelves will deteriorate.

It is almost impossible to build a plastic cabinet yourself. It can be ordered in stores or online. They are unpretentious and very easy to use. Sections can be chosen in any shade. Since plastic is very flexible, crafts made from it can have different shapes and sizes. They are easy to wash and move as they are lightweight.

If the sections are placed on the street or balcony, they can be painted in a bright shade.

Wooden crafts are very popular. But the furniture is not convenient to use. When watering plants, water often gets on the surface of the stand or board, which can rot and swell. If you decide to build a shelf out of wood, it must be carefully processed and the surface well coated with a special varnish.

Glass structures have a simple, elegant appearance, but to build it you need to have experience working with glass. They need special care. And you can’t put a lot of weight on such stands. They are good if you need to place one or two pots.

Metal structures are very durable and can withstand a lot of weight.

Combination sections include several components. Usually it is wood with metal or glass with metal. The crafts have an unusual appearance. They can withstand a lot of weight due to the combination of materials, and are not very fussy about cleaning.

Materials from which you can make shelves for flowers

Their design largely depends on the material from which they are made. At the moment, there are a huge number of options that are suitable for manufacturing. Therefore, choosing one of them can sometimes be very difficult.

Beautiful options can be found in Ikea stores. This brand always pleases with its original ideas and low cost.

To decide on the material for making flower shelves, you need to decide in what interior style and in what room you want to use them. In addition, we invite you to view color pictures of the original designs.

Materials from which you can make flower shelves:

1. Wooden shelves are considered the most popular. Such products are distinguished by their durability and noble appearance. Wooden products, depending on the design, can fit into almost any interior.
2. Glass options are very original and unexpected. However, such structures are made only from special durable glass. If you use an old window for such a product, it may crack under the weight of the pot.
3. Chipboard shelves will also find their place in any interior. This cheap material, with the help of modern means, can be decorated in a very original way, or made visually indistinguishable from wooden products.
4. Metal ones will look good in modern interiors. Stainless steel is used for such products.
5. Forged stands for flower pots look expensive and sophisticated. However, the price of such products is correspondingly high. Therefore, not everyone can afford to use them.
6. Shelves made of plastic are an inexpensive, but if executed correctly, a very interesting option. In addition, it will serve for quite a long time.

The described options can be used separately or combined with each other. The classic combination is forged metal and wood.

The benefits of creating a masterpiece yourself

The main advantage is that such work costs significantly less than buying a flower rack in a store. To make furniture you will need a little patience, raw materials from which the craft will be made and tools.

The range of store stands is very small. Not all purchased ones are of good quality. Most often, in stores and on the Internet, there are the same type of cabinets that are found in every home. Some sections will not fit your interior or room dimensions.

It needs special care and special treatment, otherwise corrosion may occur and the flower shelves will deteriorate.

When making a craft with your own hands, you have the opportunity to independently choose the size, shade, design and location of the structure. New universal furniture will only be in your home.

When creating outdoor furniture for plants, it is possible to take into account the nuances of its placement. Build it so that the flower rack is out of the way and does not have to be walked around. You can create a sliding or moving structure that can be moved to the desired location at any time.

Wooden crafts are very popular.

To make a stand, you don't have to buy something from the store. You can build a stand from an old garage cabinet or an unnecessary ladder.

Necessary materials

To make a classic shelf you will need:

• board made of wood, chipboard, MDF, plastic or metal;
• plywood;
• screws;
• plugs;
• additional tools;
• paint for decoration;
• varnish (when working with boards).

Combination sections include several components.

Additional tools can also be used to decorate the structure. If the furniture is floor-standing, you may need legs or wheels to secure the cabinet to the floor.

Characteristics

When choosing, pay attention to the following characteristics of flower stands:

• Style . Products in a classic design have a pronounced decorative appearance, are made of wood and metal, and require a lot of space. Modern beautiful flower stands are distinguished by their laconic shapes; they are devoid of decoration and are more compact. They are often made from plastic or a combination of materials.

Bronze Victorian flower girl Source ostkcdn.com

On the balcony Source pinimg.com

Required Tools

To assemble the configuration you will need the following tools:

• screwdriver;
• building level;
• electric drill;
• saw;
• pencil for marking;
• hammer;
• screwdriver;
• roulette;
• ruler.

They can withstand a lot of weight due to the combination of materials, and are not very fussy about cleaning.

The choice of fasteners will depend on the raw materials of the future configuration. The heavier the raw material, the more powerful the fastening is needed. If you plan to install a wall-mounted flower rack made of metal, then you must use a welding machine for fastening. Otherwise, there is a chance that the stand will fall soon.

Manufacturing process: step-by-step instructions

Before you start constructing a wooden craft, you need to make sure that the drawings are correct and the parts fit together. This is very important if you plan to make a cabinet with doors or a back wall.

After the materials have been selected and verified, you can begin the main work.

To make furniture you will need a little patience, raw materials from which the craft will be made and tools.

Step-by-step instruction

1. Preparation of material.

The length of the boards must be selected based on the space where the rack will be located. The width of the craft should be rather large. A medium or large pot should be freely placed on it. To make the same distance between the shelves, you can put extra bars in the middle.

1. We drill holes.

To make this craft you will need a regular drill with a large drill bit. You need to make two holes in each shelf. They should be located parallel to each other. In general, it turns out that there are two holes for each fragment. A thick rope should fit freely into the hole. If the holes are smaller, then there is a chance that the shelf will be fragile.

When making a craft with your own hands, you have the opportunity to independently choose the size, shade, design and location of the structure.

1. We thread the rope

Almost everything is ready to construct the stand. All that remains is to thread a thick rope through the holes and hang the flower shelf. After the rope is inserted through all the holes, tie a strong knot at the bottom of the product. We make a loop from the top of the rope so that we can hang the shelf.

We install the structure.

After all the main work is done, you can begin installing the finished product. Since almost all the walls in houses are made of brick or concrete, we will need an electric drill for work.

To make a stand, you don't have to buy something from the store.

We make markings on the wall where it will be located. We drill holes for fasteners and install it. Firmly fix the product onto the fasteners. Now you can put pots with plants on it.

Ideas for making shelves with your own hands

Making a shelf yourself reduces the cost of the product several times. A useful, hand-made decorative item will be original and unusual and will definitely fit into the parameters of the apartment. When drawing up a drawing of a rack or rack, you can calculate options for their location in the room and provide a suitable place for pots of a certain size. There are many easy-to-follow tutorials on how to create inexpensive stands for indoor plants.

Plywood shelves

Several pieces of wood-laminated board will make an excellent shelving unit. To create a new decorative element, you will only need available materials; you can even use used plywood sheets. The creation process according to the instructions is very simple. If you have the necessary tools, it will take a minimum of time.

First you need to create a sketch. It is necessary to calculate the dimensions of the workpieces and indicate the places where all elements are fastened. The future structure must be suitable for its purpose, be durable and capable of supporting the intended number of flower pots. Then the completed drawing is transferred to plywood. All elements are cut out using a jigsaw.

To fasten wall options, metal corners and brackets are used. Due to these same parts, the assembled structure will be attached to the surface. Plywood shelves are not suitable for bathrooms and open balconies.

Plastic shelving

Almost all plants are light-loving, so their usual location is a windowsill. The plastic panel of Euro windows is an ideal place for installing an original shelving unit. You will need to purchase 2 more of the same window sills, metal pipes, fastenings for the base, brackets. The structure will be installed on the window sill close to the glass. The work of making a plastic shelf is as follows:

• We make the necessary measurements;
• We saw the window sill into pieces of the required length;
• In the main sheet we drill holes for the pipes, two at the edges and one in the center. All recesses must be strictly parallel to each other;
• We divide the pipe visually into two parts and install it on the windowsill;
• We install the remaining plastic elements;
• We secure the shelf using brackets and flanges.

Plastic shelving can also be wall-mounted or floor-mounted. The plastic material can be given any non-standard shape. It itself can be transparent, tinted, smooth, textured. Regardless of the design, such a shelf will be durable, resistant to temperature changes, and easy to clean. It can be installed on a loggia, veranda, or on the street side of the window.

Corner shelves made of MDF, chipboard

Corner designs for placing flowers are available in many options. Ergonomic, functional shelves made by yourself will allow you to effectively use the space of the room. Wood materials can be used to make structures of any size.

The easiest way is to make a multi-story shelf, tapering at the top, which will allow you to place different types of plants. It is necessary to cut suitable surface blanks from sheets of chipboard and MDF. Then make holes in them corresponding to the diameter of the central axis. We put on all the parts one by one and secure them with flanges. We install it in a corner at a certain height and fix it with brackets. Vertical decor for indoor plants can be painted or varnished.

Wood for flower shelves

Shelves made of natural material will look great in the interior of your home. You can easily assemble a structure of any configuration and adapt it to various plants. To make the simplest option, you will need a wooden beam for the base, metal corners for attaching to the wall, and decorative varnish to give an aesthetic appearance.

Plants in large pots should be placed on sturdy shelving. Such wooden structures can withstand a lot of weight. Small boards and wood scraps make excellent corner structures for climbing or hanging flowers. A truly creative option is to combine several materials of different types, colors and textures.

To add a creative touch to making a shelf made of natural wood, you can replace the metal corners with leather straps to match the base.

Metal and wood – combined wall shelf

The combination of cold metal and warm wooden materials looks original and interesting. Welded metal can be used to make a bulky frame for floor-standing options or a lightweight frame for wall-mounted models. In both cases, wooden elements are used as stands.

For large and miniature shelving, an initial drawing with precise measurements will be required, since it will be difficult to reduce or enlarge the durable frame once connected. We will use metal rods as a base. After welding, they must be treated with an anti-corrosion agent and a decorative coating applied. Then a wooden plank is attached and the shelf is screwed to the wall.

There are a lot of ideas for making combined products. Flower racks in this combination of materials can be multi-tiered, with forged stands, in the form of triangles, ovals and other configurations. For large plants, it is better to make a shelf supported by the floor covering.

Glass shelves

Light transparent shelves are often multi-tiered and placed near the window. This way all plants will be evenly illuminated. Due to the characteristics of the material, such models are not popular, but if you approach production wisely and use the right raw materials, you can create a real window masterpiece.

The minimum glass thickness for a shelf is 5 mm. It is necessary to cut several elements to size and clean the sharp edges well. Such work can be easily done by craftsmen in any glass workshop. Transparent parts can be placed on brackets and attached separately to the window frame, provided that it is wooden, or on special slats, forming a rack.

It is better to make glass structures in compact sizes, taking into account the fragility of the base material. They are suitable for vines, succulents, violets and other small plants.

If you strengthen the lower tier of the glass shelf with wooden inserts and place it on the floor, it can be used to install several large pots.

Making a shelf for flowers and seedlings with lighting

Illuminated shelves for placing seedlings are made with wide stands, of sufficient height for free dispersion of artificial light. Traditional materials - wood, plastic, metal. Everyone chooses the most acceptable manufacturing option for themselves. The main thing is that the shelf lasts a long time, is practical and reliable.

A wooden product can be made from lattice-type timber. The bulky, heavy structure is installed on the floor and consists of several tiers. For rapid growth of flowers and seedlings in the winter-spring period and rapid growth of mass, it is necessary to install additional lighting. The following types of lamps are suitable for this purpose:

1. LEDs. The diode circuit is assembled from a selection of light bulbs. Elements of the red and blue spectrum are suitable. They are placed alternately on the base and fixed using a special paste. Then it is led out to the driver and connected to an electricity plug and switch.
2. Fluorescent lamps. The devices have a fixed length, which must be taken into account when installing the lighting to the rack. The wire is carefully distributed along the previous tier of the shelf and 2 lamps are secured with a gap of 1.5 cm.
3. Gas-discharge sodium lamps. Lighting fixtures are screwed to the base with wire or metal tape. For their proper operation, you will also need to install a control device.
4. Phytolapmas. Compact, economical lamps can be located at any distance from the seedlings. Single elements with a large radius of light dispersion are placed in the center, linear elements are mounted on a special stand.

Sliding flower rack on the balcony

Shelves on the balcony are often used for growing seedlings or organizing a flower garden. Some plant lovers even create mini-gardens. Despite the limited space, there are many ideas for organizing the space to your advantage.

To arrange as many flowers and crops as possible in a small area, sliding racks are used. When arranging them, the main thing is to maintain light for all plants. The manufacturing material is chosen to be resistant to moisture and temperature changes. Metal, plastic, processed wood are suitable. These elements must be quite strong, since the structure will be high and built in several sliding tiers.

Shelves made of plastic pipes

Cheap, easy-to-process PVC material makes original flower shelves. To make a shelf you will need several meters of pipe, tees, caps and wooden plates. You can ask for the material to be cut right in the store according to the dimensions and number of parts in the drawing.

We adjust all the details of the future shelf according to the drawing, connect and glue them together. For beauty, we put plugs on the legs. We make holes in wooden blanks and string them onto plastic pipes. 2-3 tiers are enough, since flexible material is not able to withstand heavy loads.

Shelf made of metal water pipes

A budget and practical option is a floor shelf made of metal pipes. You can make a flower stand of any size. The choice of model will depend on the functional requirements, type, and purpose of the living room.

The design of the structure is chosen based on the style of the interior. Shelves made of metal pipes for loft living rooms do not require stripping or additional processing. In shabby chic or Provence rooms, such a stand will look original with decoration using the decoupage technique, with an aging effect.

You can also make miniature wall models from metal pipes. They can be complemented with various decor, including lighting. The luminous element is installed on one of the open parts of the pipe, the wire is threaded through the hole and brought out to the outlet.

Shelves made of cable ducts

A simple plastic mounting box in skillful hands can turn into an original shelf for a bathroom or children's room. Narrow slats allow you to place only small flower pots and plant care equipment on it. The product will be moisture resistant, but not durable enough.

For manufacturing, you will need two types of cable channels - 6 and 4 cm wide. We divide the material into blanks and make cuts for installation in the corners. The cover of the product will serve as the side walls. We insert plastic cuts into it and fasten the structure to the wall.

Hanging shelf with leather straps

To make a simple shelf you will need two wooden boards, two long leather belts and furniture nails. We apply markings on the back side of the stands - this is necessary to clearly indicate the location of the belts. We make loops from the belts, fastening them to the very first hole, place the board in them and align them with the marks. We nail the belts to the wall.

We nail the second board to the straps, retreating at least 10 cm from the first shelf. If the boards are not parallel, the adjustment can be changed by punching an additional hole in the belt.

Hanging shelf made from old books

You can create an original shelf for indoor plants from simple available materials. One option is to use old books and rope. It will look great in country and eco style.

To work you will need two wide books, a drill, brushes and paints, and jute rope. Drill 4 holes around the perimeter of the books. We divide the rope into 4 segments and tie knots at the edges. We stack the books on top of each other and thread the ropes through the holes, securing them with knots. We assemble the strips and fasten them to the ceiling with an anchor hook.

Pallet shelf

This flower shelf will fit organically into a kitchen in a country or loft style. The finished pallet does not even need to be divided and modernized; in its original form it is already suitable for use. A securely attached pallet to the wall immediately turns into an original piece of furniture.

The pallet will make an excellent display shelf for ornamental plants. You just need to add a few cross slats and place flowers of the same size in beautiful pots on them. If desired, the wooden elements can be sanded, stained and painted.

Shelf-rack from an old door

The second life of an old door leaf is a vintage shelf for indoor plants or other household items. To make a high-quality rack, a product with glazing is suitable. We take it out and nail the transverse strips with a ladder. The depth of the vertical supports will depend on the degree of inclination of the structure.

To increase strength, the door shelf can be attached to the wall or its base can be equipped with a drawer. Massive legs, like those of a wooden staircase, will securely hold the canvas.

DIY corner wooden rack

To save space in the room, you can make a corner rack for violets and lilies. The stages of preparing the material are almost the same as when constructing a regular wall cabinet. But there is one caveat. The ends of the upper and lower parts must be cut at an angle.

If the furniture is floor-standing, you may need legs or wheels to secure the cabinet to the floor.

Step-by-step instruction

All elements of the upper part need to be coated with glue and connected (there should be an angle of 90 degrees). We do the same with the lower parts of the structure. After the glue has dried, treat the wood with a primer mixture. We make two holes for fastening. We make holes in the wall and install fasteners. We fix the finished product in the right place.

It is worth remembering that there are flower shelves: single, double and multi-seat.

At first glance, making a regular shelving unit is not that difficult. But these are simple stand designs. There are more complex configurations where the shelves must be fastened according to a specific pattern. You need to be especially careful when choosing materials. It is necessary to take into account the climate where the rack will be located, the weight of the items and the humidity of the environment. To understand which shelf is best to build, you first need to decide on your construction skills. Depending on how well you get along with tools and how well you know how to do certain things, the quality of the work depends.

The final stage is decoration

When creating a rack, you can come up with your own product design. By choosing the right materials and spending a little time, you will get a unique masterpiece!

The choice of fasteners will depend on the raw materials of the future configuration.

For example, a plastic product comes in different palettes. To make the design original, you can attach decorative handrails to it.

To decide what exactly you need, you need to know a few nuances.

The wooden shelf is coated with glitter varnish. This gives shine and shine to the product.

Glass shelves are often decorated with patterned metal elements.

In addition, for a craft to become beautiful, it is not necessary to paint it or attach anything to it. It’s enough just to place pots and beautiful pebbles, toys, and shells on it. Furniture can also be decorated with various fakes and toys. Don't be afraid to experiment! Create new masterpieces and improve your skills! A rack for indoor flowers is just the beginning. Nothing decorates your home like handmade items.

There are many options for wall and floor shelves available online.