A separate room specifically designed for storing clothes, shoes and other things is no longer a luxury. A wardrobe is an excellent solution to the problem caused by the lack of sufficient space for clothes, shoes and textiles.
Previously, we tried to buy huge wardrobes, hangers, several bedside tables so that there was room for things. And still the problem did not go away, because it is enough in very rare cases. Sometimes it’s easier to hang a clean, ironed shirt on the back of a chair in the evening so that it doesn’t get wrinkled in a crowded closet until the morning, and you don’t have to iron it again to wear it to work. Hangers at the entrance to an apartment with a mountain of outerwear do not look very nice, to put it mildly, and are inconvenient to use. Large wardrobes and chests of drawers steal a lot of usable space that could be used to greater advantage. That is why you need to arrange a dressing room with your own hands in the form of a separate room.
For this mission, you can allocate a part of the corridor, if its area allows, a niche in one of the rooms, etc.
Benefits of a dressing room
- With a room designed for storing clothes, you can forever forget about the mess that constantly reigned in your home. Household items can be easily separated from those intended for work or leisure. Jackets will be stored separately from T-shirts and shirts. The clothes of one family member will not intersect with the things of the rest, thereby creating clothing chaos.
- The service life of clothing will automatically increase several times. All things require that they be stored correctly. Repeated folding in the nightstand and constant ironing do not have the best effect on the condition of the clothes. This accelerates wear and tear, which in turn leads to unplanned additional costs for purchasing new items. With a dressing room where everything will be stored properly, this problem will become irrelevant.
- Access to things will be greatly simplified. You won't need to sort through all the shelves to find the item you need. Now, in order to take what interests you, you will need to open the dressing room and go to the section where the thing you are interested in hangs. A huge plus is that it will not need to be ironed before putting it on.
- If there is a separate section of the room intended for clothes, there is no need for chests of drawers, bedside tables, cabinets that have the same purpose. A well-equipped dressing room uses all the space, from floor to ceiling. Therefore, you can really fit everything into it, and you can get rid of empty furniture and thereby free up several square meters.
There are some drawbacks, but fortunately there is only one. To make sliding doors with your own hands you need to spend quite a lot of labor and time.
Assembly Features
If necessary, you can install sliding doors for the dressing room yourself. To carry out the work, you will need a set of tools consisting of a screwdriver, tape measure, hammer, hacksaws for processing wood and metal. Installation is carried out according to the instructions:
- The guides are fixed at the top and bottom of the doorway. The first should correspond to the boundaries of the door leaf, therefore it is used as the main guide. The second is mounted in a niche or inside the room with an indentation of 9 to 18 mm.
- To create a suitable design, you need to measure the opening and cut the sash from the material you like. Rollers, metal frames, and a horizontal profile are attached to them.
- After assembling the elements, the partitions are inserted into the opening with fixed guides. First of all, the upper rollers are wound up, and after they are fixed, the lower ones are mounted.
- You can adjust the cabinet door yourself. Using a screwdriver or hexagon, the position of the blade is adjusted by loosening or tightening the screws.
Organization of space, if the dressing room is in the hallway of the apartment
Detailed instructions will help you figure out how to make and install a sliding door yourself. Experts do not recommend performing the procedure if the master does not have the appropriate skills. Possible problems can only be prevented if you have experience in this area.
How to assemble sliding doors for a closet or a sliding accordion door for a dressing room is described in detail in the manufacturer's instructions. It is necessary to follow each step exactly, since different brands have their own design features.
Fix the guides
Attach rollers, metal frames, horizontal profile
Install the door leaf
Adjust height
Selecting material for making compartment doors
To assemble compartment doors, the following main types of material are used:
- Tree. This is a durable, mechanically resistant material that can bring comfort to your home and decorate the interior.
- Sliding plastic products. The advantage of plastic is its price, the disadvantage is its fragility and instability to shock, which is very important for families with small children.
- Glass compartment doors look very beautiful and add their own flavor to the interior. It is recommended to use impact-resistant glass, as regular glass is dangerous to use.
- Compartment doors, made in the form of a mirror, perform two functions at once. This material is chosen by most for installation in the dressing room.
If you plan to make sliding structures from scratch with your own hands, then you need to choose materials that can be easily processed at home and will not require additional complex equipment.
Door design ideas
Of particular importance for the perception of the dressing room in the bedroom is not only the location of the structure, but also its appearance. Nowadays, models that combine several types of fittings and materials are especially popular.
Article on the topic: Arranging a dressing room in the hallway: simple options and original solutions
Wooden sliding doors
Wooden interior doors are used to furnish dressing rooms made in classic and eco-design. A distinctive feature of wooden models is their versatility and durability (with proper care, the canvas will serve you for decades).
Sliding interior doors allow you to expand the space and give the room a logical completeness. Different types of door panels and partitions are produced from solid wood: solid, paneled and combined. The photo below shows options for this type of design.
Glass and mirror sliding doors
Mirrored sliding doors are perfect for furnishing office and residential premises made in a variety of styles. Such designs are distinguished by their unusual appearance, long service life, practicality and safety. Combined models also look harmonious - mirrored interior doors with decorative elements made of wood, metal or plastic.
Bamboo and rattan panels
A new trend in the sliding door market is to make the base from bamboo or rattan panels. This trend is driven by the desire to create environmental design. Bamboo panels are distinguished by good strength and unusual appearance.
Preparing to install sliding doors
Do-it-yourself installation of compartment doors begins with preparation. First you need to decide on the place where you want to make a dressing room. A lot will depend on this, for example, how many sashes will have to be installed for convenient operation.
Next, you need to take accurate measurements of the niche, corridor or room where you plan to install compartment doors. The number of sashes will depend on the width. If it does not exceed two meters, two moving doors will be enough. With a width of two to three meters, one fixed sash can be added. If the distance is more than three meters, you should make two movable sliding doors and two fixed ones.
The mechanism for the sliding system can be made with your own hands, but this requires a lot of time, special equipment and experience in such work. Therefore, it is recommended to buy it. You can save on door leaves, which you can easily make with your own hands. You will need to buy slats for the frame and material for filling the compartment doors at a hardware store.
Varieties
Doors are usually given a minimum of attention when arranging a dressing room, but the practicality and convenience of storing items of clothing and accessories depend on this element. The following sliding systems are in demand today:
- Recoil, or penalty. Consist of carriages, guides, rollers. Products of hope provide comfortable use. When used, the doors are hidden in a special niche; such doors are suitable for small rooms. Installation is possible with special skills.
- Sliding doors. They enjoy increased popularity due to their versatility and practicality of use. The doors move inside the guides due to the presence of rollers. The canvases move apart in parallel without touching each other. Suitable for narrow openings, corner dressing rooms. Radius models are considered the most comfortable and aesthetically attractive.
- In techno style. Unusual designs with an interesting design are easy to use and eliminate the risk of injury due to the absence of lower fastenings. Installation is possible in rooms with flat floors without thresholds.
- Foldable. This type of sliding doors for wardrobes takes up more space compared to previous options. The sashes do not diverge, but are laid in two and moved. The system has a stylish appearance and is optimal for minimalist interiors.
- Harmonic. Visually, the doors resemble a screen that folds or moves to the side. The surface of the canvas is divided into narrow lamellas, which allows you to increase the number of sashes for large openings. Practical models are easy to use and take up minimal space.
- Roto doors. They work on the basis of a rotating mechanism, which allows you to rotate the canvas around its own axis and open in any direction. The products are suitable only for large dressing rooms decorated in loft, fusion, and hi-tech styles. The designs look unusual and give modern interiors a unique, inimitable appearance.
Tips for arranging wardrobes in an apartment
When choosing the appropriate type of doors, you must be guided by the parameters of the openings and the area of free space. To measure dimensions and select the ideal design, it is recommended to contact specialists.
Recoil
Sliding doors
Techno
Folding
Harmonic
Roto-doors
How to install sliding doors with your own hands: work procedure
Installing the Top Rail
- Based on the measurements of the opening, we determine the size and number of leaves for the compartment doors. At the same time, we take into account the filling, frame and elements of the sliding mechanism. It will be best if you prepare the appropriate drawings.
- We assemble the door frame with our own hands and insert the filling, securely fastening all the elements.
- We attach the working mechanism to the sliding sashes, namely rollers, clamps, etc.
- We set the sliding doors aside and proceed to attach the top rail. To do this you will need a hammer drill, a screwdriver, dowels, and self-tapping screws.
- Now you need to determine where to install the bottom rail. To do this, place it on the floor at the intended mounting location. We take one door and insert it into the upper guide, then into the lower one. Using a level, we check the verticality of the door leaf and, if necessary, move the rail. When we are satisfied with the result, we mark the place where it is attached and remove the door. Now you can fasten the rail with self-tapping screws to the floor.
- Once both tracks are attached, the sliding doors can be inserted.
After completing all stages, the design is ready for use. You can equip your dressing room with all the necessary shelves and hangers, and then use it and enjoy it.
DIY Installation Tools
Below is a list of the necessary tools and building materials that you will need to install sliding wardrobe doors yourself.
This :
- Screwdriver;
- Screwdriver;
- Tape measure for measurements;
- Hammer;
- A hacksaw for a metal or wooden surface (depending on the panel material used).
You also need to prepare all the components, including the canvas, guides at the top and bottom, rollers, vertical and horizontal metal profiles.
A few highlights of the installation process
Due to the complex design, it is better to entrust the installation of a cabinet door, as well as one equipped with a rotary mechanism, to specialists. To do the installation yourself, it is better to give preference to other designs. There are steps to consider during the assembly process.
Once the design type has been finalized, take the necessary measurements of the dressing room in which the door will be installed. To ensure accurate measurements, use a level and plumb line. To take horizontal measurements, a level is used in conjunction with a tape measure. The height will be measured using a plumb line.
Once the calculations have been made, the assembly process begins directly. At this stage, make sure that the corners are even, and if errors occur, make adjustments immediately. Taking into account the chosen type of construction, you should first prepare a profile, preferably from an aluminum alloy, to frame the edges of the canvas. Often, limiters and other accessories are used in conjunction with rollers, which will help improve the operation of the mechanism.
How the racks and roller mechanism are installed is indicated in the accompanying instructions. The installation process is described in our informational video. From it, get as much information as possible that will be useful in case of self-installation.
Voted over 214 times, average rating 4.6
Comments
Unfortunately, there are no comments or reviews yet, but you can leave your...
Add a comment Cancel reply
We recommend reading
Sliding doors Advantages of using white sliding doors in the interior Many people think that using white doors in the interior of a room ...
Sliding Doors Advantages of Stainless Steel Sliding Door Design Stainless steel sliding interior doors will fit into…
Sliding doors Types of mirrored sliding doors, area of application The best option for decorating a sliding door is a mirror. Manufacturers...
Sliding doors Possible division of a room with retractable folding doors It is convenient to use sliding doors to zone a room. This …
