51575
“A doll’s life” should be cozy and comfortable. In order for the game to bring joy, and for the child to have a desire to fantasize about doll relationships, it is useful and easy to construct furniture for dolls from plywood yourself. This will allow you to take into account the child’s character, the size of his toys, and harmoniously fit the doll corner into the overall design of the room, which will begin to instill a sense of taste and aesthetics.
How to make chairs for dolls from cardboard toilet paper tubes?
To create these chairs you will need cardboard tubes, scissors, paints, scraps of fabric and glue.
Seat the doll and measure how high the back of the future chair should be. Cut off the excess part of the cardboard tube. Carefully cut out the notch of the chair.
Inside the chair you need to place crumpled sheets of paper, newspaper sheets, scraps of fabric or cotton wool. Cover everything with duct tape in the color you want, or wrap it in a nice piece of fabric.
Now you need to paint the future chair and glue a cardboard plug on the back of the chair.
Dinner table
This toy interior item can be made round or square.
Idea 1
How to make a round dining table for dolls with your own hands?
- Take the disk and trace it twice on colored cardboard or paper. Cut out these blanks and cover the disc with them. You now have a table top.
- Using a compass, draw two circles on cardboard, which will be half the diameter of our tabletop. Cut out the workpiece.
Important! If the cardboard is not thick, then it is better to cut out several of these circles and glue them together.
- We will make the table leg from a toilet paper roll. Place the roll on the paper and make marks along its width. Cut a strip of paper the width of the sheet and cover the roll with it. Glue the large and small circles to the roll on both sides. Due to the small circle, the table will be stable.
Idea 2
The square version is also very easy to do. We will make it out of cardboard. It is advisable to find denser material:
- Cut a rectangle out of cardboard and cover it with white paper. You can use a glue stick, PVA or any other suitable for cardboard.
- Roll the paper into a cone; the bottom of this cone needs to be cut off. Make three more such blanks. These will be the legs of the table.
- From paper of different colors, cut out small squares that look like tiles. Lubricate the tabletop with glue and glue the squares, alternating colors.
- After a few minutes, coat the surface of the table with glue again.
- Cut four strips from cardboard. Two of them should be slightly narrower than the length of the table, two - the width. We must glue them to the underside of the table. This can be done using a glue gun.
- The legs will be located in the corners of the resulting structure - it is better to fix them with cardboard strips.
How to make chairs for a doll from a tin can with your own hands?
To create these luxurious chairs you will need tin cans of the size you need, scraps of fabric, cardboard and glue.
Tin cans must be lined with fabric. Cut out the back of a chair from cardboard and cover it with fabric. Cut the chair seat out of cardboard and cover it with fabric.
Now you need to sew a fluffy skirt on a chair from a long piece of fabric (see photo) and carefully sew it around the perimeter of the chair.
For a complete set, you can also make a doll table from a tin can.
Foam rubber option
A wonderful chair is very easy to make from foam rubber and fabric. Below is a master class on how to make it with step-by-step photos.
You will need five dish sponges, a piece of fabric, padding polyester, scissors, a needle and thread, lace and beads for decoration. Instead of sponges, you can take pieces of foam rubber or polystyrene foam and cut out parts of the desired size.
For parts from sponges you need to sew covers. We fold two sponges one on top of the other and sew the first cover on them. We sew the second one also for two sponges, but folded lengthwise. This will be the back of the chair, and it should be higher than the other parts. And one more cover needs to be sewn for one sponge. This will be the top seat of the chair.
Place covers on the parts.
Sew the backrest to the double seat. We sew a strip of lace along the edge of the seat.
Now you need to sew the seat from one sponge. The connection of the two seat parts must be decorated with another strip of lace, braid or decorative cord.
Related article: Weaving a stroller - flower pots made from newspaper tubes
We sew two rectangular elongated bags from fabric.
We fill these bags with padding polyester and sew them to the seat along the edges. They make beautiful armrests. The chair is ready.
How to make a bar stool for a doll with your own hands?
To make such a stylish doll bar stool, you will need a sheet of thick cardboard, good glue, a piece of fabric, and a piece of foam or cardboard for sitting. If you make several of these chairs, your doll will be able to organize colorful parties and get-togethers, or perhaps even open her own doll bar-restaurant.
Desk
If your doll has already “went to school,” then she will need a desk. How to make a desk for dolls? It's easy to make from a shoebox:
- Select a small cardboard box and cut out the side. This will be the tabletop.
- Large matchboxes can be used as boxes. There may be several of them.
- You can make a side cabinet from the remains of the same shoe box.
- To make the table look good, you can cover it with wood-like film or simply paint it with any paints you have.
- You can use old beads as drawer handles. If you don’t have beads, it doesn’t matter, they can be made from paper. Fold the paper several times, glue it with PVA glue and glue it to the door.
Important! If a desk is needed for a small doll, then the task becomes even simpler. It can be glued together from 8 matchboxes. 3 boxes on each side form the sidewalls, and 2 boxes glued to the sidewalls and glued to each other form the tabletop.
How to make stools for a doll with your own hands?
To make these small stools you will need regular beer caps or Coca-Cola and Sprite caps.
Be sure to choose scraps of fabric with bright patterns to keep the stools trendy and original. Plastic drink caps can be used to make cute ottomans.
How to make beautiful chairs for a doll with your own hands?
If you want to create an elegant interior for your favorite doll, then choose champagne corks as a material at hand for making chairs. As you can see, ordinary champagne corks are used to make very interesting and original chairs.
How to make a chaise lounge for a doll from clothespins with your own hands?
Do you have unnecessary clothespins at home? Then you can get to work. Use the detailed photo instructions for making a doll lounge chair from ordinary wooden clothespins, and very soon your doll will be able to boast of an excellent tan in front of her friends.
