Corner computer desk - shapes, sizes, materials and equipment

Health

An office, school, kitchen or computer desk must match the height of the person sitting at it. The condition of the spine depends on the height of the product. Improper distribution of the load on the muscle corset leads to deformation of the joints in the cervical, thoracic and lumbar regions.

In the bedroom

The height of the table reduces or increases the load on the optic nerve, depending on the location of the monitor.

Changing the viewing angle unevenly loads the muscles responsible for pupil accommodation, which leads to a decrease in the quality of vision.

The choice should be approached not only as an aesthetic component of the room design. The more comfortable a person feels, the more productive his activities are, the lower his fatigue and the risk of developing chronic diseases.

Workplace with computer

Dependence of table comfort on height

The optimal height of a computer desk is important for a person, since it is in demand in almost every living or working space. If you do a small test on the location, then every third person will notice some inconvenience.

Computer desk according to standards

These include the following:

1. Incorrect back position. Many users 175 cm and above have to lean forward, which contributes to the development of stooping. People who are less than 155 cm tall, on the contrary, raise their heads up, additionally loading the cervical spine.
2. The location of the forearms is above or below the natural physiological level. This leads to strain on the muscles in the forearms, back, and thoracic region, causing misalignment or overstrain of the loaded muscles.
3. Many models are non-standard; their table top is narrowed, as a result of which a person’s feet rest against the wall of the product. This forces the chair to be pushed back, creating an additional unnatural bend in the spine.
4. The legs of a sitting person should be at an angle of 90 degrees. This ensures proper functioning of blood flow without squeezing blood vessels. In most cases, this norm is not observed, which increases the possibility of developing thrombosis of the lower extremities.

Diagram of a standard piece of furniture for a computer

In order to calculate the height of a product for convenient use depending on your height, you don’t need to be a math genius. The standard height of a computer desk, according to GOST, is also calculated in the SanPiN normative documents.

Desk height: standard for schoolchildren

The child’s physical development and health are just as important as the level of education. For the correct load on the musculoskeletal system during classes, Interstate GOST No. 110015-93 (ISO 5970-79 standard) was developed, which includes the parameters of tables and chairs for all age groups of students.

In the apartment

Tables are divided into two types:

• models with constant parameters of the position of the working surface and its height relative to the child;
• models equipped with adjustment of surface height and working plane angle from 7 to 16 degrees.

The length of the surface depends on the number of children sitting behind it. The standard for singles does not exceed 130 cm. Doubles are purchased for families with two or more children.

Typical standard diagram according to GOST

Corner models are popular because they take up less space and fit ergonomically into the room. The height of the tabletop is calculated taking into account the height of the older child. For the youngest, you need to choose a chair with adjustable height and a footrest.

GOST corresponds to the following standards for values ​​​​in the table below.

Ordering a piece of furniture without inspection may not be effective. It is worth buying models with visual samples.

The stores offer a large assortment of tables, where the standard height size is 74–75 cm. They are designed for average height, but will be uncomfortable for an elementary school student or a tall teenager.

In the room

If it is not possible to buy a desk for a student with an adjustable height and table top, it is better to find a custom-made furniture manufacturer taking into account the required dimensions.

It will be a little more expensive than ready-made models, but cheaper than a transformer.

Tables with height adjustment do not always meet the width requirements of the product. A small child needs a lot of work space. The more functional the surface, the better.

Work room

Adjustable models are produced taking into account two age categories:

1. From 4 to 10 years. They are convenient for both a preschool child and an elementary school student. They are decorated in children's colors. Along with height adjustment, the angle of rotation of the tabletop is available. They also have additional sections for storing books, tools and materials. As a rule, they come complete with chairs.
2. From 10 to 18 years. Made in a more strict design. Multifunctional. The working surface size allows you to place many accessories. The height adjustment accommodates both short and tall heights up to 190 cm.

Product drawing according to GOST

Table for growth

A transforming table is an ideal choice, but not everyone has the financial means. If the standard height of 74–75 cm is not suitable for a child, then you can make a custom-made model. It is worth considering that the table will be used for more than one year. The following should be noted:

1. If a first-grader will sit at the tabletop and the service life is designed for the period of study in primary school, then it is better to choose a model with a height of 52 or 58 cm.
2. For a middle class student, it is better to buy a table 64–70 cm from the floor. At 10–14 years of age, hormonal changes occur and active skeletal growth occurs, which is not followed by the formation of muscle mass. The school load is greater than in primary school. The child spends a lot of time in a static position. At this age, a low table is not suitable. It will lead to the development of scoliosis and osteochondrosis. A high working surface will contribute to fatigue and physical discomfort caused by aching in the cervical and shoulder girdle. This affects performance and concentration.
3. For high school students, the choice of model is practically unlimited. At this age, the height standard is 75 cm, used by all furniture manufacturers.
4. If the student is taller than 190 cm, then it is better to purchase a model with a tabletop lifting mechanism, which is designed for a long service life. The table is useful not only for studying, but also for everyday use. Another option: make a table to order or with your own hands in accordance with the calculations.

Table of values ​​depending on the student’s height

How tall should a computer desk be?

It’s worth figuring out how tall a piece of furniture should be if the house is inhabited not only by people of different heights, but also by children who are old enough to sit at the computer.

Layout of a schoolchild at a desk

Since the computer is used for a long time, the desk must be functional. More expensive models with hydraulic control for changing the height of the product have universal adjustment.

The ideal body position at the computer should look as shown in the diagram below.

Position at a computer desk

The following options exist to solve the problem:

1. If there is only one computer and the table is selected for many users, then you can create a comfortable position by adjusting the seat height. In this case, the tabletop array should be opposite the solar plexus. To ensure that the legs are in a comfortable position, a stand, slide, or stool is placed for them. You can study the best options at Ikea or another manufacturer of cabinet and office furniture.
2. If a person’s height is higher than the standard, then the user has only one thing left - to make his own version according to an individual order, taking into account the calculation of the ratio of the person’s parameters and the height of the surface. The cost of such a product will not be much higher than usual, but it is possible to achieve maximum comfort.
3. The optimal height option is easily selected using tabletops with adjustable fasteners that any adult can handle. Manufacturers of modern adjustable furniture make hydraulic calculations for non-standard high and low parameters. Manufacturers provide a large selection even for the most demanding buyer.

Standard height according to GOST

Tips and nuances

If you have the opportunity to make an original and convenient table model with your own hands, you should pay attention to the various parameters and shape. An important element is the wood from which the piece of furniture will be made.

Schoolchild's workplace

Table drawings are divided into 3 types:

• straight;
• angular;
• combined (consists of a tabletop and additional elements for placing things and office equipment).

Dimensions of computer desks with drawers and shelves

These options are also multifunctional and convenient.
Their size may vary. It all depends on whether the table is rectangular or intended to stand in the corner. Naturally, the corner computer version with additional shelves and drawers takes up more space. But this more than compensates for the versatility of the product and the resulting conveniences: an option combined with a desk and a bedside table for various accessories. Subscribe to our Social networks

Tables for office, club, student audience

Office premises, a club, and classrooms for students have limited space for placing furniture, so everyone tries to achieve maximum ergonomics with minimal clutter in the space. In fact, office employees spend full working hours in their offices.

Standard distance to the monitor according to SanPiN

The approach to choosing tables is the height of ingenuity. Manufacturers prefer to recommend a standard size of 75 cm in height for purchase, which is designed for most people. There are two forms of organizing the space of premises:

• office;
• common workspace separated by partitions.

Children's

Manufacturers offer various size options, taking into account additional elements for placing papers, accessories, and personal items.

If it is important for the owner of an organization how efficiently each employee works, then tables with adjustable tabletops that can be adjusted to the user are purchased to equip the room. For an employee engaged in intellectual activity and constant communication with colleagues and partners, mobility, dynamism and free access to the workplace are important.

Table layout

Dimensions and dimensions

The dimensions of a corner computer desk are determined by two factors: the minimum amount of space required to accommodate the components of the computer - the keyboard and the system unit, and the dimensions of the working triangle - no more than 120-130 cm between the corners. The last requirement is partially met here, since the triangle is in any case rectangular.

The minimum possible length of a straight worktop is determined by the following values: the compartment for the system unit occupies at least 23 cm, the user's workplace is 60 cm, the minimum dimensions of the cabinet are 40 cm. In total, the minimum length is 123 cm. You can reduce the table even further by combining the cabinets and a compartment for the system unit, but then the tabletop area turns out to be so small that it becomes inconvenient.

• The corner model allows you to expand the workspace, since a triangle with a hypotenuse of 123 cm assumes the size of the legs, that is, the length of the side tabletops is 80–90 cm, which is much longer. This space allows you to place a large monitor on a stand and find space for speakers and a printer.
• The height of the superstructures is essentially unlimited. The working space where it is best to place the equipment occupies about 60–70 cm - at arm's length. Shelves at higher heights are filled with materials, documents, and less frequently used items.

The maximum dimensions of the table are limited by the size of the conventional triangle. When placed diagonally, if the length of the side tabletops reaches a maximum of 120 cm, the length of the hypotenuse will be 170 cm, which is not entirely convenient. Therefore, in such models it is preferable to install racks for additional materials at the edges of the product.

With a diagonally perpendicular placement of the work surface, one of the side tabletops and a corner are found. Here, one side part can be 130–140 cm in size, and the second almost entirely consists of add-ons and cabinets with drawers or shelves.

• In any case, the depth of the product should be in the range of 55–70 cm. Reducing it creates difficulties for placing the monitor, increasing it creates difficulties for access.

Next, we will introduce you to the prices for corner computer desks for the home in furniture catalogs and provide colorful photos of them.

Photo of a corner computer desk with dimensions 1450 x 1600 x 1600 mm

How to choose a computer desk

A children's room, a kitchen, an office are places where tables are selected with special care. Before purchasing, you should figure out which version of the product is preferable and what functions it should perform.

In the apartment

When choosing, you should pay attention to the following parameters:

1. Material. Inexpensive models are made from MDF and chipboard. Plastic products are more expensive. Exclusive models are made from solid wood. The material directly affects the quality and service life.
2. Dimensions. Small sizes are more attractive in price. The smaller the piece of furniture, the better it fits into the interior. However, ergonomics and ease of use are not always taken into account.
3. Decor. Accessories can almost double the cost of a product. Modern capabilities allow the use of components that can change the position of furniture elements by pressing or light movement.
4. Manufacturer. You don't have to buy products from popular brands. You can spend a little time studying reviews about the quality of products of interest from lesser-known quality-conscious companies.

City apartment

If you choose a children's option, you must remember that the surface cannot be less than 100 cm, and the depth should be 60–80 cm. A schoolchild often lays out many objects and textbooks, so the narrow option is not suitable for him. It’s good if the table includes a footrest. The surface plane can be either horizontal or inclined.