5 ideas for getting rid of squeaking wooden furniture

Any furniture wears out and becomes unusable. A wooden bed is no exception, even if it is made of high quality materials. After some time, you may notice that the bed is creaking, what should you do in this case to eliminate the unpleasant sound? First you need to establish the cause of the squeak, and only then take action.

Causes of squeaking at the bed

There is a wooden bed in the room and you don’t know what to do. Don’t despair, you don’t need to be a furniture maker to repair it, even any woman who can tell a bolt from a screw can handle it, but if you get confused, it doesn’t matter, the picture will help you. So what to do if it sticks and how to recognize where the sound is coming from.

Creaks in a wooden bed can be in different places; several different approaches will need to be taken to determine it. But let's first look at where creaking can be found:

1. Connection of corner parts;
2. Where the legs touch the bed frame;
3. Wooden slatted base;
4. From the contact of the mattress to the frame;
5. The spring mattress creaks;
6. Feet on uneven floor.

Let's look at how the creaking at the bed occurs. Many people probably know from their school physics curriculum that friction not only causes heat, but also generates sounds. Wooden furniture tends to shrink, thereby creating a gap between the parts that rub against each other, creating this unpleasant squeak. And if the furniture has a long service life, then it seems as if a whole creaky orchestra is playing. Therefore, when examining, you need to listen to each detail separately. The photo shows in red where you need to look for problem areas.

Recommendations for the care and prevention of unpleasant sounds

Tips to help eliminate bed squeaks:

• You need to give preference to furniture that is made of expensive, natural wood;
• examine the frame - each element must be firmly attached and should not dangle;
• It is better to choose a mattress with separate blocks, the blocks are more durable and strong;
• over time, the frame must be rotated so that the load is distributed evenly over its entire surface;
• when installing a new bed, try to install it as evenly as possible - uneven load on the base and frame can subsequently lead to distortion and loosening of parts, and subsequently to an unpleasant creaking sound;
• All fasteners must be tightened so that the parts form a solid structure.

A metal bed is cheaper than a wooden one. It looks beautiful and is suitable for almost any interior. Forged furniture does not creak, it looks elegant and stylish.

All wooden beds will begin to make a sound during use.

The most durable and strong:

1. Oak is durable and practical, with a beautiful pattern, it is suitable for any interior.
2. Mahogany – interesting appearance, noble color and high quality. Mahogany furniture is not exposed to ultraviolet rays and is moisture resistant. The furniture emits an unobtrusive odor that repels harmful insects.
3. Rosewood – Luxury pieces of furniture are very expensive. The products have unusual qualities. By rubbing the wood a little, you can smell the aroma of violet.

High-quality furniture will please its owners for a long time.

Determining the source of the squeak on the bed

Of course, it will be better to work in pairs, since it will be inconvenient for one person to “wobble” the bed and listen to sounds. To calculate the seats, you need to lie on the bed and turn over, simulating a standard night's rest. At this time, your partner should listen to where the creaking is coming from. It often happens that the source is in the joint of the corner frame or in the places where the legs come into contact with the base of the bed - how to get rid of a squeaking bed.

To fix the squeaking of the bed, we will need open-end or adjustable wrenches if the connection is bolted, or a screwdriver if there is a screw connection. Try to tighten all the connections, but not too much, so as not to crush the wood. If the bed continues to squeak, then you should look for other sources.

It happens that the mattress rubs against the bed - try to level it so that it does not come into contact with the walls of the frame. If the problem is not corrected, you need to move on to an orthopedic foundation. Remove the mattress from the bed to the floor and check it at the same time; sometimes the springs creak.

Lie down on the slatted base and fidget a little; the slats can creak from the pressure on them as your body moves. The bed creaks, what should you do? You can fix the creaking with WD-40. To do this, you need to carefully spray all the connecting places of the bed before tightening the bolts and nuts.

Why is it preferable to buy a bed with slats?

Sometimes only one or two slats can creak, but it seems like the whole bed. So isn't it better to buy furniture with a solid bottom rather than with slats? In fact, slats were invented to improve the orthopedic properties of beds and cots. Advantages of a bed with slats:

1. The space between them provides air access to the mattress, as a result of which it dries better and does not emit an unpleasant odor.
2. Air circulation reduces the likelihood of mold and mildew forming inside the mattress.
3. Curved slats bend under the weight of the mattress and the people lying on it, thereby improving the performance and orthopedic properties of the mattress.

A creaking lamella can be replaced with a new one if the methods suggested below for eliminating squeaking do not work.

Preparation

If the above methods do not give a positive result, then you will have to move on to more serious work - dismantling the creaking bed. To do this, we may need a tool and auxiliary material to lubricate the rubbing particles:

A set of screwdrivers or wrenches, it depends on the fastener itself;

• Metal corners and screws (wooden reinforcing elements can also be used);
• Paraffin or candle;
• Ski lubricant;
• Graphite grease;
• Litol;
• Laundry soap;
• WD-40;
• Silicone spray;
• Rubber based adhesive.

We prepare all the tools and auxiliary equipment so as not to be distracted in the future.

Dismantling the bed

To carefully disassemble the bed, you must first understand what fasteners are used on the joints. There are several types of fasteners:

1. Bed tie - slats with hooks, in this case you just need to disassemble the bed like a construction set. It is important to remember that they are divided into left and right bars.

1. Screw tie – consists of a barrel and a screw. This type of fastening is used for end connections. Unscrews using a hexagon.

1. Canonical screed - used to connect chipboards with a thickness of 25 mm, 38 mm. It is unscrewed with a figured screwdriver.

1. Euroscrew – this tie belongs to the economy class; a Euroscrew is screwed into a pre-prepared hole. Fastens thanks to a thread in the form of a screw.

1. Dowel connection - this type of fastener does not require ties with bolts or screws. Dowels are glued into the drilled holes. After that, glue is applied to the end and the two parts of the chipboard are connected. If such a structure is wobbly, then you can open it with something thin, for example, a flat-head screwdriver. But this must be done evenly so that the gap is the same along the entire length of the sheet.

Disassembly begins with removing the slats and mechanisms (if the bed has a lifting mechanism). Next, the large headboard, which is located at the head of the bed, is unscrewed. After this, you can remove the small one, which is located in the legs.

All fasteners need to be unscrewed and looked at their condition, carefully inspect the threads and holes.

Replace the screw with a bad thread. And broken holes are repaired using glue and a dowel or a wooden chopper (chuck), which you can plan out yourself with a knife. The tree must be hardwood. A dowel soaked in glue is inserted into the broken hole. When the glue dries, the protruding part of the chop needs to be cut off. Then drill a hole in the same place.

How to make a hole - you need to drill a new hole in the center where the screw will go. The diameter of the hole must match the diameter of the screw.

There is an even simpler option; to do this, you just need to wrap electrical tape or tape around the part of the screw where there is no thread. Now you need to try how the screw fits into the hole. If there is no play (does not wobble), then this work is done and the screw will fit like new. Once everything is repaired, you can move on to another task.

The bed is creaking, what should I do? Methods to prevent squeaking in the bed, what to do in different situations

The bed creaks - what to do, how to get rid of unpleasant and unnecessary sound effects? After all, this brings a lot of inconvenience, since you cannot roll over at night without disturbing your sleep and the sleep of your household.

And your personal life will now be known not only to all the inhabitants of the apartment or house, but also to your neighbors. When your financial situation does not allow you to upgrade your bed, the question becomes what to do to eliminate these terrible sounds if you can’t afford a new bed.

Treatment of rubbing parts of the bed

When all parts have been removed and inspected, bad screws have been replaced, you can begin processing rubbing parts. To do this, you can take any lubricant and lubricate all the parts with it. This must be done carefully so as not to stain the front part of the furniture. Of course, liquid and thick impregnations will wear off after some time, and the squeak will appear again, but they will still serve for several years.

And if you use silicone compounds, this sound will disappear for a long time. You can use paraffin, all parts are rubbed, after which everything is put back in place.

There is a more reliable processing method, but it is only considered if you do not intend to disassemble the bed in the distant future. To do this, you will need rubber glue, which will create a reliable flexible gasket and at the same time glue all the processed elements together. The operating principle is as follows:

1. All disassembled parts and joints of the frame are degreased with an evaporating substance, for example, alcohol.
2. When the alcohol dries, you need to apply rubber glue to all prepared parts of the bed.
3. The frame is immediately assembled, the legs and all other parts are screwed on.
4. It is necessary to allow the structure to dry, after which it can be safely used.

But do not forget that such a variation does not imply a secondary disassembly of the bed. There is another option, gaskets - balsa wood. The cork spacer is cut to size and placed between the boards or parts during assembly. To strengthen the structure, it is recommended to install additional corner fasteners made of metal or wood.