Which mattress is better, spring or springless, choosing a mattress with or without springs

1
95358

Any furniture wears out and becomes unusable. A wooden bed is no exception, even if it is made of high quality materials. After some time, you may notice that the bed is creaking, what should you do in this case to eliminate the unpleasant sound? First you need to establish the cause of the squeak, and only then take action.

Causes of squeaking

A wooden bed may begin to creak due to the natural drying of the material or the simple loosening of fasteners. To find out the real reason, you first need to remove the mattress, throw it on the floor and check for squeakiness. Perhaps the bed has nothing to do with the sound. If you find out for sure that the bed is creaking, you will have to crawl thoroughly on it to determine the exact source of the emanating sounds. These could be old legs, boards under the mattress, places where elements meet. After the creaking place is found, we will try to get rid of the squeaks.

It's not the bed that's creaking, it's the springs.

How to determine the source of a squeak

If your orthopedic bed base is squeaking, your first priority is to determine the source of the sound. This will help you get rid of the problem faster by eliminating it with available means. The grinding noise can be produced by:

wooden bent-glued lamellas that dry out over time or at certain times of the year;
rocker lifting mechanism with which the bed is transformed;
two drawers or wooden boards in the corner of the furniture, or rather, at the points where they connect with the legs;
high legs are a problem area; the higher they are, the more likely they are to start grinding;
If the sound is heard at the headboard, most likely the lifting mechanism is worn out.

When the source of the squeak is not detected, you first need to gently rock the bed or crawl along it, creating additional vibration. When that doesn't work, gently push the support bar or footboard, listening for sounds in the corners and attachment points.

A mattress that lies unevenly or a spring unit that is placed on the floor and carefully inspected for testing can also creak. Experts recommend periodically turning them over and checking them, which will help to identify places of ruptures and wear in time.

To inspect the support bars and the attachment points in them, just lift the box spring mattress or lie on the floor and check the bed from below. Often, a careful inspection of “weak spots” helps to quickly identify the source of the unpleasant sound.

How to eliminate squeaking

The easiest way is to tighten better all the screws, screws and nuts with which your bed is assembled. In more serious cases, you can additionally secure the joints with metal corners on the inside, and coat all joints with wood glue. You should not use the bed until the glue has completely dried.

If there is nothing to tighten, you can try to lubricate all the joints of the elements with some lubricant. This could be silicone grease, soap, baby powder, candle paraffin, grease. Extreme care must be taken when lubricating to avoid damaging the appearance of the wood furniture. After lubrication, friction disappears, therefore, the squeak disappears.

Another way to solve the problem when the bed creaks is to replace or rearrange the slats that support it. They bear the main load and often quickly become unusable.

Eliminating a squeak is quite easy, the main thing is to find its source

In some cases, the only possible way to get rid of annoying sounds is to simply saw off the legs of the bed. This method is especially relevant if the furniture is not made from solid pieces of wood, but from chipboards that cannot be repaired. Then the bed turns into a stylish floor bed, which, however, is not suitable for every owner.

Any material changes its shape and characteristics over time, and accordingly, defects may appear in coatings and objects made from it. The bed creaks - how to eliminate this unpleasant, ear-piercing sound? This phenomenon brings a lot of inconvenience to household members, due to the fact that it is impossible to turn around at night without disturbing someone’s sleep. When finances do not allow you to update your sleeping place, the question arises of what to do to remove these unpleasant sounds.

Determine the cause of the squeak:

The first step is to remove the mattress with orthopedic bases from the bed structure and place them on the floor.

Important! An orthopedic base is a special base made of wooden planks - it is located under the mattress.

Check if the mattress is squeaking. You need to make sure that this mattress is not a source of unpleasant squeaking before you move on to checking the frame of the sleeping place itself. You need to get on the mattress and move around a little. If creaking is heard, then it is caused by the mattress.
Check the orthopedic base for squeaks. You need to press on it from above and try to shake it. If you hear a squeaking sound, most likely it is this that is causing all the problems.
Shake the legs of the structure and listen carefully. An unpleasant sound often appears where the butt joints between the legs and the rest of the frame are located.

Important! You must try to find the exact place where the creaking comes from.

Rock the support strips from below on the inside of the structure frame. Support strips are usually made of wood or metal. They are always located at a certain distance from each other and stretch from one side of the frame to the second. An orthopedic base with a mattress is later laid on the slats. You need to press down on each support bar to see if they make an annoying sound.

Important! Very often, the cause of a squeak is caused by the friction of one wooden part against another.

Which mattress is better, spring or springless?

Choosing a mattress requires maximum responsibility and seriousness. And here many questions arise. Which mattress is better, spring or springless? What are the disadvantages and advantages of these products? In this article we will analyze everything in detail. This will help you choose and order a suitable mattress. With its help you will ensure comfortable rest, good sleep and proper support for your back and neck.

Pros and cons of a spring mattress

It may seem like what’s so difficult about buying a mattress? But when you see the assortment, you will understand what the problem is. The market offers a large selection of products from different manufacturers and models. Before you make a purchase, find out everything about the mattress.

Spring products are in great demand. They, in turn, are divided into two types: with a dependent block and an independent system. These mattresses include springs. With their help, the load is evenly distributed, preventing the product from sagging.

If you decide to buy a spring mattress, then you need to know its pros and cons.

The advantages include the following:

The mattress will last a long time. Average service life - 10 years;
the product easily adapts to the physique of a sleeping person;
provides maximum comfort during operation;
the mattress has an enhanced orthopedic effect, and at the same time good anatomical properties;
the product does not creak when someone is lying on the bed;
The package includes only safe and environmentally friendly materials. The springs are made of metal, and the filler is made from natural sources;
the design is well thought out. The number of springs per bed varies depending on the stiffness of the mattress;
a product with a high-quality spring block has therapeutic and preventive effects on the body and health of a sleeping or resting person.

Despite the above advantages, a mattress with a spring system also has disadvantages. Let's list them:

High price. Such products are more expensive than springless mattresses.
Products are sensitive to instantaneous loads. Deformation with constant use is excluded, but if you jump on the mattress, it will quickly wear out and lose its orthopedic properties.
The springs are metal, so rust will form over time.

We do not claim that with prolonged and intensive use the mattress will not lose its orthopedic properties and will not creak. All this will happen, but much later, unlike other brothers.

Advantages and disadvantages of a springless mattress

The second most popular type of mattress is a springless product. It is a monolithic slab made from one reliable, durable filling or a multilayer structure, which includes two or more sources.

Despite the lack of springs, such mattresses have advantages:

The composition contains exclusively environmentally friendly fillers that are safe for human health. Even if they are of artificial origin, they are hypoallergenic and do not cause irritation or allergies;
good options without springs are soft and comfortable. Sleeping on them is a pleasure;
there is no chance that the springs will begin to creak, bend or break through the filler, cushioning material and cover;
Since there are no springs in the composition, there is nothing to break. This allows you to use the mattress for a long time. Average service life - 15 years;
mobile product. For carrying and transportation, simply fold it. It does not deform and will not lose its orthopedic properties.

In addition to the advantages, springless mattresses have disadvantages. Let's list the disadvantages:

Really good and high quality mattresses of this type are expensive.
Not able to withstand heavy loads. The maximum weight allowed is 140 kg.

Which mattress to choose?

We listed the pros and cons of each type of product. We are sure that the question of which mattress is better, spring or springless, is still tormented. It's not easy to answer.

Remember, when choosing, you need to take into account many factors, including weight, age, body type and health status. A few recommendations will help you make a decision:

When choosing a mattress for children, opt for a springless product with a hard filler. Children often jump on the bed; if you do this on a spring mattress, it will quickly wear out or become deformed.
People with greater weight should give preference to products with spring systems. They will allow the mattress to withstand a greater load and provide proper back support.
Elderly people are recommended to order spring mattresses with soft filling.
Persons whose weight is between 50–90 kg can use any type of mattress.

Once you understand the advantages and disadvantages of each type, it will be easier for you to choose a mattress. We offer delivery throughout Russia. If you have any doubts or questions, contact us. We'll help you make a decision.

Date: Tuesday, February 27, 2018

Eliminating the squeak

So, now you can answer the question of what to do if the bed creaks. To save your sleeping place from creaking, you need to follow this algorithm:

Take all the necessary tools for further work with the part of the bed that turned out to be faulty. You need to look at exactly how the butt joint of the bed frame is arranged, and at the place where the sound comes from. If in your case the fastening is with screws, you need to take a screwdriver of the right size. If it is bolted, arm yourself with a wrench.
Tighten the butt joint that is making the noise. Often the main cause of bed squeaking is weak fastenings in the butt joints. Before disassembling the frame, you need to tighten the screws and bolts in those places where the unpleasant sound is coming from.
Use a washer if there is any difficulty with the bolt not being fully tightened.
Completely disassemble the butt joint if the bed still creaks. Use your tool kit to unscrew and remove any bolts or screws that hold the parts together. They put the removed ones in a separate place so as not to accidentally lose them. Separate the frame parts that are included in the problematic butt joint.
Lubricate all butt joint elements. Apply lubricant to the surfaces of the two butt joint parts touching each other. The following are the best types of lubricants for this purpose:
WD-40 is an aerosol lubricant suitable for use on beds that have a metal frame. The only downside is that it can dry out over time.
To remove bed squeaks, you can use candle wax. They need to rub the parts being processed.
Silicone Grease. You can purchase it at a hardware store, and then use it to treat all problematic elements of the butt joint - this way you will get rid of squeaking for a long time.
Reassemble the bed frame. Return to their places all the parts that were unscrewed, tighten all the bolts and screws.

Important! You need to make sure that all fasteners are tightened tightly to prevent them from making more noise later.

Check to see if the squeaking has stopped. Try rocking your sleeping area to see if any annoying sounds remain.

How to eliminate a squeak

What to do if the orthopedic metal bed base creaks? Check the fasteners carefully. The bolts and nuts are thoroughly tightened, simultaneously lubricating them with Vaseline or special compounds. The wooden base is not tightened, but you can lubricate them with wax or Vaseline once again.

Carefully treat the joints of the front and rear backrests with the sides of the bed, the points of contact between the frame and slats. Wooden parts are lubricated with wax, soap, silicone or petroleum jelly, metal parts with silicon or lithium grease. If this does not help, gaskets are inserted between the parts to eliminate friction.

When the lamellas squeak, you should first try to lubricate them with wax or paraffin. The second option is to swap them or pull them out of the groove, wrap them in cloth and insert them back. If all else fails, the rack is cracked under stress and will have to be replaced.

Securely fixing them will help get rid of squeaks in furniture legs. If this does not help, you will have to replace the parts with new ones. The same goes for the lifting mechanism. It is thoroughly lubricated and tightened, or, as a last resort, replaced with a new one.

We fix problems quickly

A wooden bed creaks - what to do if you cannot repair it yourself? Below are some useful tips to solve this problem:

Pad the frame support strips with unnecessary clothing. The fabric will not allow the orthopedic base or mattress to create friction with the bed frame.
Use cork sealant to fill excess gaps in wood frame bed frames.
Place a towel or other fabric under the uneven legs of the bed to prevent it from rocking and making unnecessary sounds.
Place a book under the mattress near the source of the squeak. If the annoying sound comes from the support bars, you need to remove the mattress with an orthopedic base from the sleeping place, and then place the book on the creaking bar. After this, you need to return the orthopedic base and mattress to their place.

Have you ever thought that most of us spend a third of our lives in bed, because we sleep about 8 hours every day?! The bed we sleep on is very important in determining how successful our next day will be. Choosing the right bed is a good investment because good sleep is essential to feeling energized throughout the day and having the energy to complete your tasks. And, in the end, a bed is our long-term investment, because you will spend on average at least 10 years in it.

Have you been having trouble falling asleep lately? Do you often toss and turn and wake up in the middle of the night? Or are you suffering from back pain? The problem may not be so much with your body as with the bed you rest on at night. Disturbed sleep may be a sign that you need to buy a new mattress or replace it with a new bed entirely. Today we will talk about how to choose the right mattress and bed for the bedroom.

How to eliminate bed base squeaks

Even a high-quality bed sometimes begins to creak after a long period of use. The unpleasant sounds that accompany any movement cannot but irritate. It is unlikely that they will allow you to sleep peacefully. This is, of course, a problem, but not a reason to throw away furniture. After all, in some situations you can get rid of squeaking without much expense.

Why does the bed squeak?

The source of unpleasant sounds can be any - the back, legs, base of the bed, decorative and fastening elements. Creaks may indicate that:

deformation of wooden surfaces occurred under the influence of increased loads, high humidity or other factors;
fastenings have become loose. This can happen even with new furniture if it is poorly assembled;
The lifting mechanism is worn out.

And sometimes the culprit of the noise is the mattress. This happens especially often with old Bonnell spring models and low-quality products in which the independent springs are not properly secured. Unfortunately, in this case the situation can only be corrected by replacing the mattress.

What to do if your new bed squeaks?

It happens that furniture begins to grind almost immediately after purchase, from the first days of use. The problem may be poor fixation of fasteners or a manufacturing defect. Good manufacturers always provide a guarantee. Therefore, if you contact the store and a quality discrepancy is identified, they will agree with you on a possible solution to the problem.

If the warranty period has already expired, you will have to solve the problem yourself. In this article we will tell you why the bed creaks and how to get rid of annoying and unpleasant sounds.

Determining the source of squeaks

Before fixing the problem, you need to find out exactly which elements are damaged. To find out the cause of the squeaks, you need to remove the mattress and check every detail:

press on the anatomical base
test lifting mechanisms
check the correct fixation of the lamellas
shake your legs
make sure the fasteners are secure
carefully inspect all joints of parts

Most often, the anatomical base creaks. Drying of wooden slats leads to a change in their size, which causes friction with the frame. The appearance of a grinding noise can also be caused by loosening of the fasteners that hold the planks or by their displacement.

How to eliminate the creaking of a bed with an anatomical base?

If the cause of unpleasant sounds is the friction of wooden planks on the frame, you can line the joints with fabric, rubber or polyethylene, i.e. create a soft and flexible layer at the points of contact between the elements.

Also, lubricating the joints of parts with wax, silicone, paraffin or petroleum jelly can help. If the furniture is metal, it is better to take a special silicon or lithium grease. It is worth noting that this measure will only help for a while, and the procedure will have to be done regularly; squeaks may appear again after one or two months of restful sleep.

When choosing a bed, comfort comes first!

The point is that you should be very careful when purchasing a comfortable bed. No one can be happy and sleep well on an uncomfortable bed. Before purchasing, you should always sit on the bed, lie down, feel all the amenities and only then make your choice. Here are some questions you should ask yourself before purchasing:

How do I feel lying on this bed?
Do I like everything about her? As I already said, “A bed is a long-term investment that will work for you for at least 10 years.” Don't forget this phrase.
Is the mattress on the chosen bed soft enough?
Is the bed itself wobbly? After all, very often furniture is made very beautiful, but at the same time completely unreliable. You should choose a more stable option, in the truest sense of the word.
Does the bed conform to the shape of my body?
– pay attention not only to the size of the bed, but also to your own. After all, each of us is different, some are plump, some are long, but at the same time, each of us should experience pleasure from sleep. If two people sleep on the bed, then you should take this fact into account, because the greater the distance between you, the better your sleep will be.

If after purchasing, you still cannot sleep on your bed, then perhaps you really have problems sleeping. After all, I’m not saying that a bed or mattress can cure insomnia or get rid of sleep disorders, no. However, an uncomfortable bed and mattress can certainly negatively affect and thereby intensify these problems.

The mattress can be called the heart of your bed; in addition, it is part of the purchase, and this product very often costs even more than the frame itself, but you cannot save money here. A soft mattress and a comfortable backrest are the very secret of a good sleep. A mattress cannot be purchased separately; they should always be considered and selected together, since you need to know exactly the dimensions and other nuances of the bed.

By the way, to check whether your old mattress is worth replacing or not, you need to stay in a good type hotel for a while. And sleep a couple of nights on a good, high-quality mattress. On days you live away from home, pay attention to how you feel when you wake up: do you have pain in your back or shoulders, do you experience any stiffness in your movements, and generally how well did you sleep. If you feel better than at home, then this is a signal that it’s time for you to get rid of your old and unnecessary mattress.

Today in stores you can find many types and models of mattresses: demi-season, orthopedic, feather, inflatable, futon and similar options. However, the choice of one mattress or another depends only on you and your preferences. For example, if you sleep on your stomach, you will probably prefer a softer model, but if you sleep on your back, then you are better off choosing an orthopedic type of mattress. There is only one way to find out your type: come to the store and lie down a little on each type. I agree, it won’t look very ordinary, but that’s why stores exist, so you can come to them and try out this or that thing. Try to lie not just directly on the mattress, but take exactly the position in which you directly like to fall asleep. If you think that you will feel somewhat constrained in the store and cannot ask the seller about this, then go with friends or family who could push you to take this step.

If you are buying a mattress or a bed with a mattress for two, then you should “test” your future item together. Remember that lying together on the same mattress you should not feel your partner, that is, your soulmate should be indestructible regardless of the actions of your partner. This way you will never wake up at night or earlier than your scheduled time.

If the bed is too soft, then you will sink heavily into the mattress, putting your muscles under stress, which is not a positive thing in your sleep. However, a very hard model may also be unpleasant for your body, since the mattress will not fit your body shape. There are many types of mattresses, each providing varying degrees of comfort and support, depending on a person's shape and weight. Just choose the model that feels best to you.

Do not go to select and test this or that mattress when you are tired, since absolutely any model will seem very pleasant and comfortable to you.
Choose those stores where there is plenty to choose from (there is a wide range of models), as you will have a better chance of finding your ideal option.
If the mattress turns out to be very soft, it will be difficult for you to roll over on it.
Inspect the product before purchasing, there should be absolutely no flaws on it.
If you hear squeaks in the mattress, it means that the mattress is defective or of low quality.
If you are choosing a mattress for two, then go shopping together, because not only you, but also your partner should like it, and it will be more interesting to test it.

The general rules say that you need to buy the largest bed that can be found in your room. The larger the bed, the more space you and your partner will have to move freely without getting in each other's way. Remember that furniture should be selected not only by width, but also by length and height. The length of the chosen bed should exceed your height (or your partner, if he is taller) by 10-15 centimeters (at least).

If you have a small bedroom and you can hardly fit a regular double bed into it, then the available space comes to the fore. Proceed from it, taking into account all the details. Try to mentally rotate the future bed and imagine which side it can fit in best. Remember to leave enough space to enter and exit the room. The bed should not block access to windows, drawers or cabinets. Don’t forget about the door to the bedroom, it should still open. It may sound stupid, but there have been cases of mistakes in miscalculations...

As such, there are no standards in beds; they can have the most unexpected sizes and shapes, so the same model can have different sizes from different manufacturers.

Single bed

In European countries, a single bed has a length of 200 to 210 centimeters; the width does not change significantly, varying from 90 to 100 centimeters. For example, European models are often narrower, while American ones are wider. In our countries (Russia, Ukraine, Belarus, etc.), beds with such sizes are often called “teenage”, since a single bed is often purchased for a minor child living with his parents, or it is placed in the guest bedroom (in those houses where guests are often invited).

Single bed

In fact, this is the narrowest bed for two. In everyday life it is often called a “lorry”. In Europe, a double single bed has a width of 140 to 160 centimeters. American models are called Double or Queen, their width varies from 137.2 to 152.4 centimeters, and the height from 190 to 203.2 centimeters. Therefore, it is better to take the “one and a half” trucks of the American type.

Double bed

If you want to purchase a full-fledged double bed, then you need to pay attention to options with a width of 180 centimeters. European models have a maximum width of 200 cm. In America, such beds are also called “King”, but their width is practically no different from European ones. Eastern models have the widest beds (up to 204 centimeters). If you are looking for the longest double beds, then Western models will have them (up to 214 cm).

How to choose a bed size

Perhaps you cannot immediately choose the correct bed size, in this case, go to the store “for testing”. To correctly determine the width of a single bed, you need to lie on the mattress in the middle and bend your elbows so that your left and right index fingers touch each other. At the same time, your elbows will be widely spaced, but do not try to remove them, relax and evaluate whether they are hanging from the mattress? If your elbows do not fit on the bed, this means that the width is not enough to fully experience the comfort of sleep. The bed will cause you especially many problems when you turn over in your sleep (from side to side). In this case, it is better to pay attention to the one-and-a-half model. In the same way, you can check the length of a double bed, but both of you will have to lie down.

Depending on your choice, the bed frame may be wooden or metal. However, over the past few years, wooden beds have become very popular, as they are environmentally friendly, safe and of high quality if made of oak, pine or beech.
If you want to choose the most beautiful bed, then first of all look at the headboard, as it is the most important and interesting element from a design point of view. And it is she who sets the style of all the furniture in the room.
Elderly people should pay special attention to the height of the bed; to do this, they must sit on the bed, and their feet should not be torn off the ground.
If you have problems with the musculoskeletal system, then, first of all, be interested in the stiffness of the mattress, since it is this that can provide the desired position of your body and reduce the load on the spine during your rest.
If a person is allergic to anything, then we recommend choosing a mattress model that contains synthetics or foam rubber.

30.05.2018 0 6

Why might a bed squeak, and what should its owner do in this situation? How to eliminate unpleasant sound and identify the main causes of squeaking?

Sound sleep is the key to a productive day. During rest, strength is restored, nutrients are absorbed and energy is accumulated. However, certain circumstances can disrupt the quality of your sleep. One of the negative factors can be a malfunction of the bed. Poor quality of the mattress or the furniture itself not only affects sleep, but also leads to health problems.

Mattress - with or without springs

Mattresses in the distant past were the creaking of springs.
You lie down on it and find yourself a centimeter from the floor. On average, a person spends a third of his life sleeping. The body needs this time to rest and recover. Therefore, the right choice of mattress determines how soon you will feel back pain and whether you will feel it at all.

In the photo there is a Blue Sleep mattress, a branded Duvet blanket and an anatomical Blue Sleep pillow

A person who comes to a regular store may panic. There may be hundreds of different models on display on the sales floor. You can’t lie on everyone, you can’t touch everything. How then to choose?

We suggest that you familiarize yourself with the main characteristics and choose the appropriate model of the house so that you are fully equipped at the store.

5 principles of an ideal mattress

Your mattress should be 20 cm longer than your height. And at the same time, it should not hang over the bed.

A good mattress is always about safety. Remember that synthetic materials that the manufacturer has saved on can cost you your health. You recognize them by their unpleasant smell.

If you suffer from allergies, choose a mattress made from hypoallergenic materials. Imagine if, out of ignorance, you went to sleep on a wool mattress.

If the mattress “does not breathe,” pathogenic bacteria are sleeping on it besides you. Be sure to check if everything is fine with the air exchange of the model you are interested in.

Your age is an important criterion when choosing a mattress. Young people feel comfortable on a hard bed; older people need to choose a soft mattress so as not to interfere with blood circulation.

If you have a history of musculoskeletal disorders, see your doctor for advice. It will determine the degree of rigidity of your sleeping place relative to the localization of pain.

Mattress with springs

All spring mattresses can be divided into two groups: with a dependent Bonnel spring block; with independent spring block.

The dependent spring block has the same stiffness over its entire area. It may start to creak, it is considered short-lived, but budget-friendly. That is why such mattresses are practically not in demand, except perhaps as a summer cottage option.

Another thing is mattresses, in which hundreds of springs are located separately from each other and covered with special covers. Soft, medium-hard, hard - you choose a mattress to suit your parameters and preferences. And besides, you can choose a mattress with several dozen zones of varying hardness. Perhaps your lower back will be on the soft part, and maybe your wife too. Each partner chooses their ideal firmness and rests comfortably throughout the night.

Two and a half hundred springs per meter of mattress and you get a wonderful sleeping place, made according to modern standards.

Multipocket, for example, delights customers with five hundred springs, and super-comfort models can contain up to two thousand microsprings.

What is good about a mattress with an independent spring block?

The photo shows an orthopedic hybrid mattress Blue Sleep (with microsprings and a combination of foams)

Firstly, these mattresses are orthopedic. They can relieve you of back pain or prevent it.

Secondly, there is no noise or “wave” from this mattress. Sleep becomes truly restful and pleasant.

The plus and minus of such a mattress is the price. They are more expensive than their counterparts, but they last for decades, which means they are much healthier for both health and the family budget. A single mattress will cost you 20 thousand rubles, for a double mattress you will have to pay up to 50.

There is one inconvenience that makes the buyer think about whether or not to buy a mattress with an independent spring block - you cannot jump on it. If you are ready to put up with it, choose and sleep peacefully.

Here’s what customers who have already used a spring mattress say: “We bought a Blue Sleep Нybrid mattress, we’ve been sleeping for a month and are very satisfied! At first acquaintance, it seemed very soft - this is a deceptive impression, the mattress is moderately soft, as it should be; Sleeping is very comfortable, adapts to the shape of the body, we wake up well-rested. In combination with an orthopedic pillow, it eliminates swelling! I never thought that proper sleep could solve this problem. Our mattress is hybrid. It is more expensive than the Concept because it has springs. More than 2000 pieces per bed. We began to get enough sleep - for the first time in many years of sleeping on all sorts of sofas. Thank you for the wonderful mattress!”

How to choose a mattress with springs

In addition to springs, the mattress contains an additional layer of “filling”. How comfortable your mattress will be depends on the thin layer connecting the cover and springs.

If you want the mattress to be elastic and dense, choose coconut filler.

If you want to get maximum softness, use latex. By the way, if your figure is thin, a soft mattress will suit you, and if you have a curvy figure, a hard one will suit you. Children should sleep on a medium-firm mattress while their spine is developing.

Mattresses without springs

Body support on such a mattress is formed thanks to high-tech materials. They, like a layer cake, are filled with different “fillings” and due to this they can be of absolutely any hardness.

Most often, latex is used as the basis for such mattresses. Its properties will last for many years, and its softness gives the sleeping area a special coziness. So that you do not have to pay a lot of money for an all-natural mattress, the latex material is “diluted” with polyurethane foam. To add rigidity to the product, the manufacturer can add a layer of coir, which will give the mattress elasticity. You can adjust the firmness of the mattress using the same components, but swapping the layers.

Coconut mattresses are ideal for newborns and disastrous for older people. Their rigidity will help the baby get enough sleep and cause back pain for the pensioner.

In addition to the classic, familiar fillers, modern Memory Foam has appeared on the market. This is a foam material that has the ability to “remember” the contours of the body and restore its shape in a matter of minutes after a person gets out of bed.

Manufacturers have learned to turn ordinary mattresses into products that satisfy a number of customer requests. New generation mattresses “breathe,” retain heat, and repel moisture, all thanks to the use of high-tech materials.

The main advantage of a springless mattress is its reliability. It doesn’t matter whether a child jumps on it or not, because it definitely won’t break.

If your mattress crumbles or tears, rest assured that the manufacturer saved on materials.

Orthopedic springless mattresses have both pros and cons. They are quite more expensive than their spring “colleagues” and at the same time have amazing orthopedic properties.

Sensation Deluxe 27 filled with expensive Tempur® foam costs about 220,000 rubles.

What their owners say about springless mattresses: “I would like to express my opinion in favor of the Blue Sleep Concept mattress. We bought it and have been testing it for the second week. No complaints, only positive emotions. Comfortable, moderately hard, and very pleasant to rest on. The mattress supports your body on all sides and does not press anywhere.”

Choosing a mattress without springs

The best option is a multi-layer mattress made from different fillings. Hard in the middle and soft at the edges, the models are ideal for sleeping and relaxing at any age and with any weight. The only thing is that no matter what the springless mattress is, it will support a weight of no more than 130 kg. If your weight is more than 100 kg, choose a hard spring mattress; if you weigh less, choose a medium-hard or soft mattress.

There are also special thin mattresses without springs, made to hide the unevenness of the sofa.

Buying a good mattress

No one can tell you about mattresses better than a specialist from a specialized company.

Here's what a specialist from Blue Sleep, which is known for innovative developments in the field of sleep products, says: “To choose a mattress that will give you a healthy sleep, contact official dealers of well-known brands. This can be either a specialized department in a large shopping center or an online platform. You can explore the assortment offered in the online store, and then visit the showroom to finally make your choice. We are of the opinion that a mattress is one of those products whose practicality and comfort can only be assessed during use. Therefore, even testing in a store will not allow the buyer to fully understand how convenient this or that model is, although it can help in choosing: testing will allow us to eliminate some obviously unacceptable options. It is not easy for many to decide because of the large assortment of mattresses that look similar to each other, which at the same time can differ significantly in cost. To make it easier for our customers to choose, we have done what is often done in Britain and developed orthopedic mattresses that can satisfy the requirements of most customers. The weight of the sleeper, position during sleep, body temperature - we take into account all factors in the design of mattresses. As a result, two models emerged that can be called universal. This is a springless Blue Sleep Concept mattress, which has above-average hardness and is designed for a load of 120 kg per bed. And a mattress with a block of independent springs Blue Sleep Нybrid with a permissible load of 140 kg. Each product is a “sandwich” of several layers. In both models, the top layer is made of Sleep Cool Memory Foam, which has a memory effect. The material adapts to the individual characteristics of the sleeper: relieves tension from the points of greatest pressure, provides delicate but reliable support for the spine. It is made from raw materials based on natural soybean oil; this composition improves the hygroscopic requirements for the mattress, ensuring good ventilation and compliance with hygiene standards. Plus, the material reacts to heat and “regulates” the temperature of the sleeping area, preventing overheating or hypothermia. Due to the way it is produced, Sleep Cool Memory Foam is less dense than other mattress foams, so it recovers its shape faster, which increases the service life of the product. Additional ventilation of the mattress is created using special air channels in the monolithic layer. The basis of the products is a multi-zone block of elastic foam Blue Foam, durable and elastic. Anatomical back support is provided in the Blue Sleep Concept model by creating zones with reduced pressure in a monolithic block. In the Blue Sleep Нybrid model, 2000 thin, light and flexible microsprings, which have a patented design and were awarded the Royal Corporate Award (a prestigious award from the British Royal House), are additionally responsible for this.

Such innovative production technology is very expensive, therefore, in order to make prices affordable for consumers, we at Blue Sleep have eliminated intermediaries from the production and distribution chain, delivering mattresses to customers almost from the factory. Until recently, such mattresses were attributes of luxury premium bedrooms, but we believe that good things should be affordable. Therefore, we do everything to reduce costs as much as possible, including regularly offering discounts and promotions.

Every buyer can be convinced of the quality of Blue Sleep mattresses: upon purchase, we provide 100 days to test the products, and if you are not satisfied with the product, we guarantee a refund. At the same time, to process a return you do not need to save the packaging - all you need is a receipt and a label. The 100-day test begins from the moment the customer receives the product, and we are confident that you will not be disappointed with the mattress you purchase from Blue Sleep.

For buyers living in St. Petersburg, Moscow and the Moscow region, delivery of goods is free. Additionally, a service is provided for the removal and disposal of old mattresses.”

On the Blue Sleep company website you can find out the terms of installment plans, check out numerous promotions and look at the product catalog, which in addition to mattresses includes comfortable anatomical pillows, blankets and accessories.

Causes

Before you start to deal with the problem, study the possible causes of its occurrence. Many of them are associated with a long period of use of the bed. Over time, the wood from which the frame and base are made begins to dry out. The mattress also becomes faulty and loses its former quality.

However, even a new bed can cause grinding noise. This indicates its improper assembly or poor quality materials. To more accurately determine the source of the annoying sound, you should take a closer look at the following things:

Mattress. In most cases, springs creak when they are not isolated from each other. But not only spring mattresses can become a source of unpleasant sound. Poor quality polymer in an all-polymer model leads to grinding noise.
Lifting mechanism. The reason may be weak fasteners (heaviness and sudden movements of people on the bed are the reasons for weakening of fastenings), or a malfunction of the spring unit.
High legs. Occurs at the junction of the bed frame and legs. And the higher the legs, the greater the risk of squeaking.
Support strips. They are lamellas that make up the base of the frame. They contain an orthopedic base and a mattress. One of the possible causes of grinding is touching parts.
Slatted base. Wooden slats that are attached to the frame. Most often, an unpleasant sound comes from the place where the support bars are attached. In addition, wooden parts tend to dry out.

What to do if a bed with a lifting mechanism creaks - causes and solution to the problem

Articles What to do if a bed with a lifting mechanism creaks?

Beds with a lifting mechanism are considered reliable and strong, but sooner or later problems may arise with their operation. The most common malfunction is the occurrence of a squeak, which appears as a result of friction of one part against another. Then the owner has a question - what to do if a bed with a lifting mechanism creaks and what reasons caused the problem?

Reasons why a bed with a lifting mechanism creaks

In order to find out why a bed with a lifting mechanism creaks, the product will need to be disassembled and inspected. The most common reasons causing this problem are the following nuances:

Loose fasteners. If screws, nuts, bolts or other fastening elements become loose, under the influence of gravity and as a result of the movement of people on the bed, the parts begin to rub against each other and cause squeaking.
Wood drying out. Since beds with a lifting mechanism are mostly made of chipboard and wood, the material begins to dry out, shift and change shape over time. Gaps and distances form between the elements, causing an unpleasant sound.
Problems with the support part. The problem may arise in the place where the leg is attached to the base of the frame. Most often this occurs as a result of a loose fastener.
There is a problem with the lift spring. Since the element of the mechanical structure responsible for raising and lowering the berth wears out over time, stretches and loses its elasticity, it can become the main cause of squeaking.
Incorrect installation of slats. If the grooves are not installed correctly, they begin to rub against the fasteners or fall out. As a result, the slats wear out, and their friction causes squeaking.

In order to determine which part of the bed is creaking, you need to remove the mattress and make movements that loosen the furniture in the direction from the foot to the head. This should be done carefully, without making much effort and listening to the sounds that arise. As a rule, at this moment you can determine exactly where the creaking is coming from. If there are no sounds, you should inspect the mattress, which can also cause squeaking. This can occur due to wear on the springs, especially when the product has been in use for a long time. In this case, it should be replaced.

How to get rid of the creaking of a bed with a lifting mechanism?

After it has become clear why the bed with a lifting mechanism creaks, you can try to eliminate the reason that caused the problem. First of all, it is recommended to tighten all fasteners. If they are old or worn out, it is better to replace them or supplement them with new corners, placing them on the inside of the base of the bed. It is also recommended to lubricate these places with wood glue or rubber glue, which will secure the screws, nuts and bolts more firmly.

If the identified cause of the squeak is friction of wooden elements, they need to be lubricated with lubricant. Rubber glue, solid oil, spray with graphite or silicone, a paraffin candle or dry soap are suitable for this. To process the product, you will need to disassemble it, degrease the joints with alcohol, let it dry and lubricate it. The structure should be assembled only after the joints have dried thoroughly. After this procedure, the treated surface becomes smoother and more protected, friction disappears, and squeaking disappears.

Problems with the supporting part are solved by fixing them more securely. Since over time the leg may become loose again, in some cases it is recommended to completely get rid of these parts by removing or sawing them off.

If it is determined that the spring of the bed lifting mechanism is creaking, the entire structure will need to be replaced. Typically, such problems arise with a mechanical device, since in a gas elevator the part is less exposed to stress and wear. In order to change the lifting mechanism, you should unscrew the fasteners holding it, remove the element and put a new one in its place.

If the cause of the creaking lies in the lamellas, you need to try to secure them more securely. If this does not help, the slats should be rearranged. In cases where the squeak does not disappear, the parts must be replaced with new ones of similar size.

What to do to prevent a bed with a lifting mechanism from squeaking?

Not a single product is insured against squeaking, but in order to reduce the likelihood of an unpleasant sound, it is recommended to choose furniture taking into account a number of nuances:

Material. It is better to choose a bed made of chipboard or high quality wood. A product made of reliable material is more wear-resistant to external influences and does not require special operating conditions.
Orthopedic base material. The most suitable option are slats made of birch. Despite their elasticity, they are strong and not subject to bending or breaking. If the structure is complemented by a rubber fastening system, the risk of squeaking due to problems with the base of the furniture is practically eliminated.
Support element. When choosing a bed with a lifting mechanism, it is better to choose the option without legs. If you still like models with support more, their length should not exceed 5 – 10 cm.

To ensure that a bed with a lifting mechanism does not creak, provides comfort and pleases its owner for many years, it is better to choose models from good manufacturers. Manufacturers such as Perrino, Ormatek, Rayton, Benartti, Soft Wall, Toris guarantee good quality and produce products that meet all necessary standards. By choosing the products of these companies, the consumer minimizes the chances of problems that cause squeaking in a bed with a lifting mechanism.

Source: https://www.terapiyasna.ru/stati/state-chto_delat_esli_skripit_krovat_s_podemnim_mehanizmom.html

Determining the source of an unpleasant sound

Pull out the mattress. Place it on the floor, sit on it, then walk around. If you hear a sound, you can safely assume that the problem is a malfunction of the mattress.
Rock the bed without a mattress. If no sound comes out, then the mattress is causing the squeaking. However, there may be more than one sound source.
Check the slatted bottom. Press on each wooden slats and listen to which one makes the sound.
Rock the bed frame. A grinding sound indicates poor fastening or faulty frame materials.
Check the lifting mechanism. If this is the source of sound, it is recommended to check the connection to the frame. Wooden devices also have drying problems.
If you have not identified the cause, and the bed still squeaks terribly, contact a specialist.

What to do if the frame creaks?

Creaking is typical for a wooden frame, the parts of which dry out over time. And if you do not eliminate the problem from the very beginning of its appearance, then the gaps that form due to dryness will become even larger. Consequently, the creaking will begin to irritate even more and more often.

Therefore, you can simply tighten the fasteners. After tightening, it is recommended to use silicone lubricant. It will reduce friction between parts. If you don’t have any special lubricant at home, a regular paraffin candle will do.

Eliminating mattress squeaks

First, check if the mattress is lying flat. Even such a stupid reason can cause a grinding noise.

Inexpensive mattresses with spring filling are characterized by the problem of spring contact. Friction leads to an unpleasant sound.

The cause of sound in an all-polymer mattress is the poor quality of materials. A faulty mattress should be replaced immediately.

If you don't have a lot of money, pay attention to well-known inexpensive furniture stores. “Ikea” is famous for its affordability and originality of design solutions. If the purchase was recent, contact the manufacturer for warranty information. In this case, you are required to return the money or replace the defective product with a working one.

Mattresses with a block of independent springs

Independent springs act completely differently. Each of them is placed in a separate case and works independently, “without paying attention” to neighboring springs. This means that the load is distributed evenly across the mattress. You are supported only by those springs on which you are directly pressing at the moment.

The bed remains elastic and flat, the spine stretches and rests. Thanks to the orthopedic effect, you get enough sleep faster. Gradually, your posture improves and back pain disappears, even during sedentary work.

Which spring mattress is better to choose, with which block of independent springs? There are a lot of options now. There is one basic rule: the more springs per square meter of surface, the better, the higher the useful properties of the mattress.

What can I do to prevent the frame and slats from creaking?

If you find a problem with the frame, start your inspection with the slats. They need to be checked for chips, cracks and other integrity problems. If damaged, they should be replaced.

The fastest way to get rid of squeaky support bars is to back the book. If this method does not help, cover the slats with old clothes; thanks to the fabric, there will be no friction between the frame and the base.

If you are convinced that the lamellas are undamaged and the lattices are in good working order, you should pay attention to the screws. After tightening the screws, you need to lubricate the creaking bases with silicone grease.

Video: how to get rid of a squeaking bed?

Bed mattress: which one to choose

All mattresses are usually divided into two large groups:

Most often, spring mattresses are held together: some very tightly, others more quietly, but sometimes squeaking can also be heard. If you are purchasing a spring mattress, make sure that each spring element is independent, isolated from the others, and placed in a waterproof bag.

The thing is that if the springs are not independent, collected in blocks, then from time to time they will get lost against each other and thus create a squeak. If there is no waterproofing, the element will rust from sweat. At the same time, the absence of a cloth bag can also lead to squeaking.

Prevention

If you are lucky enough not to encounter such a situation, this does not mean that you do not need to do anything. It is always easier to prevent a problem than to eliminate it.

Of course, the quality of the bed and mattress itself directly affects the occurrence of squeaking. Therefore, when purchasing, you should pay attention to the quality certificate. An unsuitable mattress or broken bed not only leads to annoying rattling noises, but also to health problems. It should be noted that polymer mattresses have a lower risk of malfunctions. When choosing, you should pay attention to ventilation, because it can become moldy.
It is better to choose wood or metal as the frame material. They last longer and cost less. The density of a chipboard frame is lower, therefore, there is a greater likelihood of deformation under high gravity. If the bed is wooden, then varnish its frame to prevent the wood from drying out. Regarding the type of wood: it is worth taking a closer look at durable species such as oak, mahogany or rosewood.
Pay attention to each lamella, it should not wobble or dangle, all screws and screws must be in place.
When installing the bed yourself, pay attention to the evenness of the surface. If the distortions are strong, then it will become unusable ahead of time. Uneven pressure on the frame leads to misalignment of parts.

How to get rid of annoying bed squeaks yourself?

5 (100%) 1 votes

Very often with metal beds a problem such as squeaking occurs. It seems that this drawback is insignificant, but over time the unpleasant sound begins to irritate, and soon it simply drives you crazy. Rest turns into real torture. In addition, if the apartment has poor sound insulation, then creaking and scratching will cause inconvenience even to your neighbors.

In order not to tolerate this, you should resort to some measures. Such a “breakdown” can be quickly dealt with without resorting to the services of a specialist, and even without the use of special tools. The main thing is to find the cause and think of a way to eliminate it.

Cause of unpleasant sound

Most often, problems arise with old bedroom furniture, but sometimes they also happen with new pieces. Often, a metal bed creaks for several reasons:

Parts touch as a result of improper assembly;
Over time, the material becomes distorted and deformed;
Fasteners become loose due to constant interaction.

Each of the presented options is eliminated in different ways. Machine oil or tightening screws does not always help. Not only the bed itself can creak, but also the mattress. Therefore, it is first important to understand the situation, and only then take action to repair it.

If the reason is in the assembly

What to do if a metal bed creaks due to incorrect assembly initially? One of the structural elements may be out of place, which leads to unpleasant sounds.

There is only one way to correct this defect - dismantling and subsequent reassembly, which will comply with the instructions. Often, errors are made during factory assembly, so the product has to be returned to the store where it was purchased. Such cases are rare, but they are possible.

You can fix the problem yourself or seek the help of specialists. In any of these cases, the solution is quite simple and does not require a lot of time and money. A refurbished bed will serve you for quite a long time.

Creaking during use

After some time, the product begins to make unusual sounds that may interfere with rest. What to do if a metal bed creaks, but at the same time it has not lost its presentation? Naturally, you shouldn’t throw away furniture; everything can be solved in a simpler way.

If the bed is completely metal, then over time the structural parts begin to deform:

The hull sags;
The bolts are unscrewed;
Grooves appear at the attachment points.

When the structure consists of both a wooden and metal base, the number of noise sources increases noticeably. For the wood option, the only solution may be to replace the parts, since no treatment will help.

A metal structure can restore its original shape if it is subjected to thermal or mechanical stress. This is the only way to correct the deformation. It is important that the combined elements fit tightly and do not move relative to each other.

Wear of parts

Often a metal bed creaks as a result of loosening screws and beveled fasteners. This defect can be eliminated by slightly tightening the nuts, but sometimes this is not enough. During long-term use, the bolts and joints may rust. Only special lubrication and treatment will help here.

Sometimes you have to completely replace the bolts or twist the fasteners, but it is better to spend time on such work than to listen to the nasty creaking sounds every time you turn it on its side. More often, this need arises when the fastening is mixed, that is, metal and wood are combined.

The reason for the nasty sound may not be the bed itself, but the mattress, or rather its springs. You won’t be able to fix the problem yourself; you’ll just have to buy a new product. You can determine if a mattress is broken as follows:

Remove the product from the bed;
Place it on a flat surface;
Press down each square of the mattress one by one.

Any man can tighten the nuts and lubricate individual elements of the bed. For such work you do not need special tools or any professional knowledge. If there is a need to replace parts or rearrange them, it is better to contact specialists.

There can be many reasons why a metal bed squeaks. The main thing is to discover the source and cause of their occurrence. Such changes occur not only with metal beds, but also with wooden, combined ones. However, in comparison with these analogues, this material is more durable and does not require special care.