Changing table for newborns: photos of modern models, examples of placement in the interior

Changing tables are made from different materials: plastic, metal, chipboard, wood. To choose the right model, focus on the dimensions of the room, functionality and safety of the product for a child.

Changing tables are a special piece of furniture for baby care, which allows you to implement the following procedures:

• swaddling,
• changing a diaper,
• undressing before swimming,
• massage,
• gymnastics.

The base of the table is solid; a stationary or folding frame is used as a support. A tabletop equipped with sides often has a limit rail. A waterproof mattress is placed on top of the table, protecting the surface from moisture.

Types of changing tables

Among the types of changing tables, the following stand out:

• Changing board . The structure is limited on both sides by protective edges. The base of the product is wooden, with a latex coating, which is environmentally friendly and easy to clean.

The models are transportable, easy to maintain and cost-effective, taking up little space in the apartment.

The disadvantage of the designs is that they lack a significant number of options: there are no shelves for cosmetics, no cabinets for children's things.

• Changing board on the bed . They are easily transported, but it is not recommended to install the structure in rooms with uneven floors, since the frame may lose stability.

The models do not save space in the room; they do not have space for folding children's supplies. To move the table without scratching the surface, you need to carry it.

• Pelenator-shetka . The structures are made of metal, plastic, wood, and are equipped with shelves for cosmetics, side trays, pockets and hangers.

Models save space in the room and are easy to move. Most often they are equipped with open shelves and wheels with brakes.

• Chest of drawers with changing pad. The horizontal surface is used as a changing table. To do this, you will need to buy a booster (changing mattress), limited on two or three sides by soft sides.

Advantages of the models: interesting colors, elegant design, use of a variety of decorations. Cons: the changing mat can slide on the surface, drawers are difficult to open.

• Changing table with bath . Such products are functional and are used to store swimwear and linen.
• Chest of drawers with bath, shelf and folding changing board . It consists of a removable bathtub designed for bathing, into which a board is lowered for hygiene procedures and changing the baby's clothes.

It is moisture resistant and functional.

• Baby cot with chest of drawers and changing table. These are combined beds, designed for children from 0 to 10 years.
• Changing table-transformer. Such designs are functional, because over time they can be used as a children’s table for games and study, a desk or a bedside table.

Classification according to body material:

• Tree. The material is easy to paint, varnish, polish, and has a beautiful texture. Wooden changing tables are resistant to mechanical damage and absorb sounds well.

The downside is that such structures can change size and shape under the influence of moisture, so the surfaces of the products are coated with special protective compounds.

• Chipboard. A popular material for the manufacture of inexpensive cabinet furniture. These are slabs of wood shavings and sawdust, glued together with adhesives containing formaldehyde resins.

The advantages of such products are resistance to high temperatures, strength, and moisture resistance.

The main disadvantage is the toxicity of the coatings.

• Metal. The structures are easy to clean, are not afraid of moisture, are durable and stable. Metal products have anti-corrosion coatings, surprise with a variety of designs, but are difficult to transport.
• Plastic. Moisture-resistant, durable, heat-resistant material that is easy to paint, so the products look colorful and interesting, attracting the child’s attention.

The downside is that plastic models are not harmless to health; they release toxic chemical elements into the air.

Baby changing table, types

When choosing furniture for a children's room, first of all, you should take care of the baby's comfort. A swaddling device is necessary, even if the parents are not conservative and do not intend to swaddle the baby, as they did several decades ago. They won't have to constantly bend over the bed when they need to change their baby's diaper. By placing the baby on the diaper, the mother will easily carry out the necessary manipulations and change the baby’s clothes.

Types of baby diapers

Folding changing table - ideal for small spaces and also indispensable when traveling. Small, portable, transportable, and if necessary, folds with one movement of the hand.

A transformer is a practical and multifunctional piece of furniture. The advantages include its small dimensions and the presence of several spacious drawers for children's linen and hygiene products. In most cases, a soft mattress is sold together with a swaddling device. The comfort lies in the fact that the things necessary to care for the child are always at hand, and the surface remains free.

Changing chest of drawers, it has more impressive dimensions. A strong argument in its favor is the possibility of using it for other purposes when the baby grows up. The changing chest of drawers looks like a regular cabinet with pull-out shelves, but it is equipped with protective wooden sides that can be removed if necessary. In the future, it can be used as a spacious cabinet.

The hanging changing table is almost invisible and folds easily. It is attached to a vertical surface by the back wall, the working part is brought to a horizontal position, and its height can be adjusted. Hanging structures are equipped with a large number of pockets necessary for storing creams, diapers and talcum powder. Such models are manufactured by the Ikea corporation; their products are characterized by accuracy, conciseness and simplicity.

A baby diaper with a built-in bathtub has its superiority. Install it in the bathroom, and the room must be of the appropriate size. The bathtub model also has special racks for clothing and swim accessories.

Stationary traditional samples on a wooden or metal base are designed in the form of a bookcase; they can be equipped with hooks, drawers or pockets on the sides. Everyone selects dimensions, design and color to their own taste, focusing on the finishing features and size of the room. The mattress for a classic changing table is selected in proportion to its parameters.

Pros of changing tables

Pros of wooden tables:

• resistance to mechanical damage;
• do not fade in the sun;
• easy to varnish and paint;
• beautiful texture;
• environmental cleanliness;
• soundproofing characteristics.

Advantages of metal products:

• anti-corrosion characteristics;
• easy to clean;
• strength;
• sustainability;
• original design.

Advantages of chipboard models:

• resistance to high temperatures;
• strength;
• moisture resistance;
• inexpensive products;
• lightweight, transportable.

Advantages of plastic tables:

• easy to paint;
• heat resistance;
• variety of colors;
• moisture resistance;
• easily transportable.

Cons of changing tables

Disadvantages of wooden tables:

• cracking under the influence of high temperatures;
• are subject to deformation;
• low moisture resistance;

Disadvantages of metal products:

• difficult to transport;
• weighty structures;
• expensive material.

Disadvantages of chipboard tables:

• toxicity, environmental unsafety;
• hard material that does not allow fine processing;
• it is possible to change the structure of the material.

Disadvantages of plastic products:

• low level of environmental cleanliness;
• sensitivity to mechanical damage;
• fade in the sun.

How to choose a changing table

• When choosing a changing table for newborns, pay attention to the material from which it is made. It is desirable that it be environmentally friendly, does not cause allergic reactions, and does not have a strong odor.

When buying wooden structures, inquire about the moisture resistance of the material.

• The mattress cover (changing pad) is coated with moisture-repellent compounds and is easily cleaned of dirt.
• Give preference to functional models equipped with the required number of shelves, trays, pockets and hooks.
• Buy roomy models: the wider the surface, the better, because babies grow quickly.
• Stability of the structure is one of the main criteria when choosing. Pay attention to accessories designed to maintain balance.

It is better if the chosen model does not have protruding bumps and corners. Products must be equipped with locking wheels that block involuntary movements.

• Check the functioning of the roller guide mechanisms; the drawers should open easily so as not to waste a lot of time getting things out of the shelves.
• Choose models with sides with soft or rounded corners; they will protect your baby from accidental impacts.
• Pay attention to products with hanging shelves. The fastening of such structures must be reliable, since they are unsafe for the baby. These are functional models that save space.
• When choosing a model with a hinged lid, make sure that it is clearly fixed in the hinged position. This will protect the baby from falling out.

• Select changing tables according to your height, then they will be functional.
• Choose models equipped with limiters on open shelves, this will protect against contents spilling over.
• Before you buy a product, take a closer look at the quality of accessories and fittings. Trays, hangers, hangers, towel hooks, laundry baskets - all these devices will help organize the correct swaddling of the baby.

Recommendations from experts on choosing a changing table

The main requirement for all children's things is safety. Only high-quality products guarantee this.

What you need to pay attention to when choosing a changing table for your baby:

• Material.

Products made from wood or MDF will not harm the baby’s health. A practical changing surface requires fabric with a water-repellent effect.

It is advisable to abandon models made from chipboard; some manufacturers still use toxic substances. If you still purchase a product made from chipboard, you should inquire about the quality certificate. The same requirement applies to plastic samples.

• Design.

Children's furniture should a priori be reliable and stable. The best manufacturers equip their models with rubber “shoes” to prevent changing tables from slipping. Products with wheels must be equipped with brake linings.

The sides must be at least 5 cm high to prevent the baby from falling.

• Size.

The length of the changing surface for a baby must be at least 70 cm. Such a table must have a width of at least 60 cm. The area of ​​the changing area should not be restrictive for the child. Since the baby spends 1/3 of the daytime on the changing table, the baby should feel comfortable on it. The length of the changing space for children over six months should be 100 cm.

• Height.

The diaper is designed for both the convenience of the baby and his mother. The optimal table height is 95-105 cm.

• Functionality.

The best choice is a product with shelves for storing things. It is convenient and profitable: this model will be useful even when the child has passed toddler age.

• Design.

Simplicity is the key to purity. The baby does not need elaborate reliefs, which, moreover, are difficult to wash. Practical products - no cut-out elements. The color is chosen taking into account “children’s preferences” - neutral, without “combat” shades that tire the eyes. White, wood, pastel colors are welcome. For girls, they usually choose ivory-colored furniture, for boys - wenge.

Thus, the criteria for choosing a changing table are based on:

• The quality of the material is safe, hygienic;
• Ease of use;
• Appearance of the model;
• Operational period of the product;
• Price.

Exploitation

Recommendations for the use and care of diapers:

• Folding and unfolding of structures, opening and closing of cabinets and drawers is done silently so that the child does not get scared and does not wake up.
• Hygiene products (cream, powder, scissors, cotton wool) should be located on the far shelves so that the child cannot reach the items.
• The changing table must not be used if any part of it is broken or missing.
• Do not leave your baby unattended to prevent the baby from falling out. The water drainage hose should be kept out of the reach of children.

• Do not locate structures near open flames or other sources of intense heat.
• Check threaded connections regularly for leaks and safety.
• Make sure that all bolts are tightly screwed in as your baby may get caught in body parts or clothing.
• The table must not be transported while changing; this poses a danger to the baby. Secure the wheels when the device is in use.
• If the changing table is dusty, clean it with a special spray. It is not recommended to use abrasives, bleaches, ammonia-based or alcohol-based products for cleaning.

If the table folding function is not provided, install it once and fix the position.

• It is not recommended to exceed the maximum load (about 15 kg). Baskets and middle shelves can support 3 kg. Place baby supplies evenly throughout all compartments.
• When using a bath, make sure the water is at the appropriate temperature. Do not use a bathtub without a frame.

Design and rules for choosing a chest of drawers for newborns

Frame

First, it’s worth understanding what components a changing chest for newborns consists of. The frame is not a complex structure. It is based on two side walls and one back. The bottom and tabletop are used as stiffening elements. In overhead models, this role is played by the base under the changing table.

A chest of drawers with a changing table for newborns often has quite different dimensions; the selection of a model depends on certain parameters.

• Height. Here you should make sure that mom is comfortable. It turns out that the choice must be made based on the woman’s height.
• The length and width should allow the baby to fit completely on the table. Moreover, it will fit with some margin. When choosing a chest of drawers based on these parameters, it is worth remembering that capacity also depends on the width.

For understanding, we list the main dimensions that are considered standard.

• Width at least 50 cm.
• Height 90–110 cm.
• Length 60–90 cm.

When choosing sizes, it is worth remembering that the larger the chest of drawers, as well as the table, the longer it can be used for changing a child. Accordingly, you won’t have to rack your brains and look for an alternative when the baby gets a little older.

Filling

As in a classic chest of drawers, drawers are the most common. Depending on the design features and dimensions, their number can range from 3–8 pieces. Typically, small drawers are used to store care and hygiene items that should be on hand at all times. Large boxes are good for storing diapers, clothes, and nappies.

There are modifications with shelves and open niches. The shelves are usually covered with doors; it is convenient to place baby care products here. Niches are usually used for sanitary napkins, rattles, and other small items.

Sometimes you can find multifunctional chests of drawers with add-ons. Such furniture can be combined with a closet, allowing you to save space and store more children's things.

Accessories

When choosing a specific model, you should definitely look at the quality of the fittings. It should only be of high quality. The handles are rounded and the drawers slide out without additional effort.

Drawers can be pulled out on ball or roller guides.

• Roller guides are the most common. Movement occurs along guides, which are located on the sides of the box. Rollers are attached to the box itself, which move along the guide rail. It is worth remembering that such a solution is not reliable; under heavy load, the “rail” can become deformed, and if handled carelessly, the roller falls out of it. But such a system is inexpensive.
• Ball guides are more expensive. They are more resistant to loads and make virtually no noise when moving. Thanks to the stops, the drawer does not fall out, even if it is almost completely pulled out.

If you use a door for shelves, you should pay attention to the hinges. Here, a hinged furniture hinge is used, where one half is securely fastened to the body, and the second is installed on the door, and when opened, moves in an arc. It is necessary to pay attention to the strength of the fasteners, as well as ease of opening.

Supports

A chest of drawers for changing a baby can have the following types of bases.

• Base. This is the most stable option; in fact, it is a continuation of the frame. The sidewalls are used as the main support. When choosing such a model, you should pay attention to the sawn bevel at the back; this is done for the baseboard; if there is no bevel, it will not be possible to place the furniture close to the wall.
• Wheels. A very interesting option, which is characterized by increased mobility. Furniture can be quickly moved, making room cleaning easier. There are modifications where wheels are installed at the back and legs at the front. When purchasing, always check that there are locks on the wheels. This is important for safety; the chest of drawers will definitely not “move away” from you at the most inopportune moment.
• Legs can be high or low, sometimes made of metal or wood. For greater stability, you should choose a model where the height of the legs is 10–15 cm. They should also be quite wide. Check how securely the legs are attached to the body.

Guarantee

The warranty on changing tables is from 1 to 5 years, depending on the manufacturer. A sales receipt or warranty card is required for free service.

It is imperative to preserve the presentation of the product. If a manufacturing defect is detected, the product is replaced with a new one or repaired.

The warranty is not provided in the following cases:

• the structure shows signs of wear;
• if the table is used incorrectly;
• the fastening of parts of the structure was deformed;
• the product shows traces of mechanical damage;
• changes have been made to the product design;
• Product repairs were carried out by non-specialists.

The warranty does not apply to accessories included with the product.

What is a changing table and its general characteristics

A changing table is a special piece of furniture for caring for babies. It allows you to easily perform such necessary procedures as swaddling, changing diapers, undressing before swimming or after a walk, massage, gymnastics, and hygiene care. All tables must have a hard changing surface. Its support is a stationary or folding frame, and sometimes a bathtub, a children's bed or even a wall (if we are talking about a compact model).

Depending on the base material, frames can be metal, wood, or durable plastic . Wood or plastic is used to make the tabletop; its surface is limited by protective borders - in the form of rounded rollers covered with fabric or flat wooden borders. Sometimes there is a limit rail, which, if necessary, covers the fourth side.

To fold things and put cosmetics, there are trays, shelves, drawers, pockets, hooks - this depends on the type of table. At the bottom there is usually a container for dirty laundry. A waterproof mattress is sometimes included in the kit, or it is purchased separately.

Choosing a warm and comfortable winter envelope for a newborn baby. What does a nursing pillow look like and is it worth buying?

Do you know at what age a child begins to roll over? https://klubmama.ru/razvitie-rebenka-po-meyacam/razvitie-rebenka-s-3-6-mesyacev/rebenok-nachinaet-perevorachivatsya.html No? Follow the link and read.

Malfunctions

Deformation of individual parts of the structure

This indicates poor fastening of the load-bearing part of the product. The guides bend and the connection becomes loose. Deformation often occurs from excessive load. To correct this, you should return the structure to its original shape and secure it.

The appearance of chips, scratches, mechanical damage

To eliminate this, you will need to polish or varnish the materials. Before applying varnish to the surface, the wood is sanded with pumice until shiny. We leave the furniture for 3 days, then apply a second layer to even out roughness.

It will take 5 days to dry.

The materials used to restore the coating are putty and soft wax. Then we polish the product with alcohol to a mirror shine.

To restore plastic structures, you will need sandpaper. Choose fine-grained skins; coarse-grained ones will leave grooves and scratches.

You can polish products under running water. We sand with light circular movements. If there are serious deformations on the structure, remove them with coarse sandpaper.

Fading furniture

To restore the color of furniture, you will need to polish or sand it with retouching markers, you can mix several colors on the palette and apply them with a brush.

To remove white spots from sun exposure, wipe the stain with alcohol. Wax marks can be removed using a hot iron.

Washing powder and laundry soap are not recommended.

Swelling of furniture due to moisture

To get rid of bubbles that form on furniture surfaces after soaking, you should pierce the area with a disposable syringe and fill the area with PVA glue.

If a crack occurs, you need to tear off a piece of veneer using a spatula, then seal the area with adhesive, press down and cover with a weight.

Creaking structure

To prevent the wood from making unpleasant sounds, place felt pads at the joints; you can soak them in hot drying oil.

Before applying old glue, get rid of the remnants of the old impregnation.

Spare parts for changing tables include:

• left panel;
• right panel;
• side frames;
• soft top;
• Velcro;
• large trays;
• bath;
• upper metal frame;
• small trays;
• wheels;
• fasteners;
• drain hose;
• cork;
• mesh bag;
• plastic brackets.

Manufacturers

Antel

The company sells cribs. The products are made from environmentally friendly materials. The beds are equipped with special PVC covers that prevent the child from touching the varnish coating.

Advanced technologies are used in production. Products are sold in Russia, Belarus, Kazakhstan.

ATON

The company specializes in the production of kitchen fronts, large-scale modular furniture for living rooms, bedrooms, hallways, children's rooms, and kitchens.

The company is constantly improving its products and expanding its range. The furniture is intended for economy class and middle price group consumers.

Berber

Brand products provide comfortable swaddling of the baby during trips, games, and sleep. The range includes playpens, high chairs, car seats, and special bedding.

Changing tables are stable, durable, reliable and comfortable. Products are tested at all stages of production, products have quality certificates.

CAM

The Italian brand has been producing children's products for 30 years. Advanced technologies are used, products are made from environmentally friendly materials. Products are produced in different color variations, and models with original designs are being developed.

The strollers include lightweight strollers, compact two-in-one devices, and strollers for twins.

Feya

The assortment includes children's furniture, goods for walking and traveling, accessories for caring for the baby and organizing the child's leisure time.

Materials used in production: Interspan chipboard (made in Hungary), Egger (made in Austria), German Dollken edgeband. The models have fronts with rounded edges that protect the child from injury.

Gandylyan

The company sells children's furniture. Designs for newborn babies and teenagers, educational games and play vehicles are presented. Among the popular products:

• cots on wheels that can be easily moved around the room;
• rocking beds with wheels equipped with a cradle function;
• cribs with a pendulum mechanism;
• transformable cribs that combine the functional features of a changing table and bedside table;
• linen and changing chests of drawers, equipped with an ergonomic shelf for changing a newborn;
• children's mattresses are springless products made from elite materials.

The structures are made from high-quality materials: beech, chestnut, oak. The wood does not require special impregnation or painting; it retains its integrity under a safe water-soluble varnish.

For glossy grinding and varnishing of surfaces, high-precision German, French, and Italian equipment is used. The company's changing chests of drawers are stable, durable, protected from moisture and fading of the body.

Geuther

The company's principle is to produce safe and comfortable products. The furniture is made from natural materials, high-quality types of wood are used.

Environmentally friendly paint and varnish coatings are used for surface treatment. Products are tested at different production stages.

The company's products are divided into three groups:

1. Functional furniture for children's rooms: comfortable chairs, cabinets, cribs. Combines harmonious design and functionality.
2. Furniture for games and entertainment that helps a child explore the world. These are ergonomic sets of tables and chairs for drawing, rocking horses.
3. Products used for child care: changing chests and tables. Such models are compact and ergonomic, equipped with barriers and playpens for safety.

The company's products are certified according to standards and labeled appropriately.

Kubanlesstroy

The company's products include cribs, wardrobes, chests of drawers, handmade furniture and home accessories. The company focuses on modern production technologies in accordance with well-known design trends.

Factory-produced and handmade furniture is produced. The range includes products with a pleasant texture, smooth outlines and a variety of shades.

MIBB

The brand's products are made from environmentally friendly materials, are safe for health, reliable and functional. The products satisfy modern customer needs and comply with standards and regulations.

There are transformable beds that can be folded out conveniently. Acceptable ratio between quality and price of goods.

Micuna

The products are environmentally friendly to health, made of natural wood, and coated with non-toxic varnishing compounds. Represented by the following products:

• cribs;
• cabinets;
• changing chests and accessories;
• high chairs;
• shelves;
• hangers;
• textile elements (cases, bed linen sets, towels, bedspreads);
• decorative items.

The company's furniture is reliable, undergoes strict certification, is comfortable and easy to use.

The company's changing tables are equipped with reliable sides, have an original design, are functional and easy to clean.

The products are manufactured in accordance with international and European standards.

Mozhga

The products are represented by kitchen, office and cabinet furniture. Children's products include playpens, chairs, changing tables. Changing tables are distinguished by their durable design, reliability, and environmental friendliness.

The products are designed for the average consumer, meet standards, and are properly labeled.

OKT Kids

The brand specializes in plastic household goods. These include food storage containers, drawers, laundry baskets and bathtubs. Children's products include bathtubs of various shapes, children's potties, boxes for storing things and toys.

The company's products are distinguished by functionality, environmental safety, and excellent quality. The products have a quality certificate DIN EN ISO 9001:2000. Acceptable ratio of pricing policy and quality of goods.

SKV

The product range is constantly expanding, innovative technologies are used. During production, the needs of the modern market, standards and sanitary norms, and the equipment of modern living spaces are taken into account.

The company is distinguished by the use of high-quality fittings and paints and varnishes. The products are certified and labeled according to standards, designed for the average consumer.

Vedruss

The brand's products are distinguished by their convenient shape, beautiful colors, functionality and reliability.

Baby cribs with drawers, on wheels or runners are comfortable and reliable, they are distinguished by their attractive appearance, aesthetic design, and high functionality.

Changing tables are produced with reliable sides, high-quality fittings and durable construction.
Advertising from sponsors: // // //

What types of chests of drawers with a changing table can be for a newborn, the basics of choice

The only thing that goes beyond this principle is the movable part of the changing table; it is connected to the main table using furniture ties.

If we talk about the direct installation of the changing table on the chest of drawers, then everything is very simple - they are combined into a single product using spikes. For these purposes, identical holes are drilled in both the chest of drawers and the table - the whole complexity of this process lies in their alignment. In principle, precise marking completely solves this problem - after this, wooden spikes pre-coated with glue are driven into the chest of drawers, and glue is also applied to the holes of the table. Then the parts are connected.

In conclusion, I will add only one thing - do not rush to glue the changing table with the chest of drawers. As a rule, the need for the first exists for a maximum of six months. After this period, when the changing table is no longer needed, it can be removed, the holes from the thorns can be closed with decorative plugs, and the chest of drawers can be used further for its intended purpose.

Author: Sergey Ivanov

Author: admin |