How to make garden furniture with your own hands: the best ideas for making unusual and simple outdoor furniture projects (95 photos)

Unremarkable plots of land are turned into beautiful places only after long and hard work. At the same time, decorating a garden plays no less a role than planning it and planting plants. Independent creation of furniture for a public garden is accompanied by some difficulties due to the large size of the structures, but at the same time it is an interesting and educational process. The style of the site is usually coordinated with the appearance of the house, primarily with the facade. Those who do not know how to assemble the necessary structures or design them will have to seek the help of experts. New knowledge is gained from designers, experienced gardeners and owners of large plots. In any case, it would not hurt to develop a garden or nature theme on the site. The most experienced ones equip the square with beds for their pets, play areas for children and large furniture for relaxation. Assembling garden furniture with your own hands will require care and complete dedication.

Peculiarities

Garden furniture usually belongs to one of 3 types, which include portable, permanent and folding. The first category includes chairs and tables, some versions of swings. If something happens, there is a place for them under the terrace cover, in the garage, basement or inside the house. Permanent furniture can only be dismantled. The folding type is the most difficult to implement, but the resulting structure can be reduced in size if necessary, sometimes several times. Living up to its name, it is made by movable joints. Folding furniture can be either permanent or portable. If possible, it is better to assemble structures for the garden indoors with a workbench and a large table for work. Then the accessories will be protected from moisture, and the storage of waste materials will be convenient, and there will be better opportunities for recycling.

Manufacturing materials and modern design

Comfortable and stylish, easy to use garden furniture can be easily created with your own hands without any specific carpentry or carpentry skills.

A home craftsman can use different materials and simple tools that are suitable for processing them, while creating unique designs that attract the attention of others.

Garden furniture style

Rustic is the first on the list of justified options. The main milestones of the style were wood, rounded lines, relief and slight negligence. Proponents of perfectionism will more like crafts in a somewhat similar loft style. The rustic style will help in arranging a natural environment for spending free time in peace and quiet. Furniture in the English style is made with classic “notes”, balanced proportions and lines. The combination with small unevenness in the landscape will be organic. The Japanese trend in design involves the observance of straight lines and, in fact, Japanese motifs, designs and patterns. Decorative plants will complement the street ensemble. The garden in the spirit of French classicism is furnished with sophisticated products. At the same time, symmetry should be maintained in the arrangement of furniture.

Other relevant styles in this context:

• eco-style;
• Oriental;
• Mediterranean.

Three important selection criteria

The choice of functional and beautiful garden furniture will be successful if you initially take into account such an important nuance as resistance to weather changes. If you are going to place furniture in the garden outdoors, then first of all, carefully consider the choice of material

, from which it will be made.
If you do not intend to change garden benches and tables every year, then when choosing, consider the following :

• practicality of painting - will such furniture fade in the sun and how quickly;
• resistance to moisture (rain, snow) and temperature changes;
• aesthetic appeal and combination with the general design style of the garden plot and the facade of the building

When designing a garden, always pay attention to the overall composition

What to make from

Everyone can find more or less suitable materials. Wood, metal, plastic and unnecessary old things contained in the basement or garage are, one way or another, stored for future use, but sometimes these materials are forgotten about. The first step is to carefully inspect all storage facilities. There will definitely be blanks for several original homemade products there. Old fabrics are useful in creating screens, curtains, and seat upholstery. Sheets, boards, beams, sections and solid wood are sold in most hardware stores, although sometimes you have to order blanks, and sometimes it makes sense to make them yourself. The required metal structure is more difficult to find. Metal products stored on site, as well as their parts, only occasionally suit the shape, quantity and aesthetics of the coating. Additional materials and fasteners are selected in advance, almost simultaneously with the main workpieces.

Metal

The best solutions for DIY production:

• bronze;
• aluminum;
• brass;
• steel;
• stainless steel;
• copper;
• cast iron;
• iron.

A long service life coupled with the anti-corrosion properties of modern products is what makes the material suitable for manual assembly and, accordingly, additional savings. Metal tables and chairs fit perfectly into the green background of bushes and trees. It is better to assemble your own products from aluminum - it is not for nothing that it is considered the best. Seats are often made of plastic or wood, but the qualities of aluminum are also suitable for creating a comfortable seat. The legs can be made from heating pipes. For fastening you will need welding or bolts. Pipes are bent using a car disk. To prevent the workpiece from cracking, sand is poured into the cavity and sealed with small blocks. For countertops, QSB sheet and treated boards are suitable. The seats are often made of foam rubber, covered with vinyl leather or dermantine.

Tree

The popularity of wood is guaranteed by its natural beauty and environmental friendliness. Wooden products remain among the most prestigious. For garden furniture, slats, bars and boards are usually chosen, that is, materials that are easiest to work with. It is not recommended to use coniferous wood in open spaces, as it damages clothing with the resin it produces. The raw materials can still be simply deresined. Logs make massive benches. Working with the material is not easy, but with pre-processing it is possible to assemble mobile structures, sometimes without a single fastening element. Coffee tables, armchairs and sofas can be assembled or finished using sections of tree stumps. Some take the idea further and drive the stumps themselves into the ground, treating them appropriately to ensure a tight connection. Solid wood, driftwood and firewood will make interesting designer furniture; you just need to add some imagination.

From unnecessary things

Old, unused items will make the task of organizing your garden even easier. Thanks to thoughtful presentation, shabby and broken furniture will become the hallmark of the yard. The beds will be used as low fences, and the cabinets will be used as doors or gates. A broken piano will play the role of a secret bar, and the cabinet will serve as a tiered flower bed. Old shelves are turned into stands for flowerpots. A skilled craftsman will assemble a whole set of medium-sized furniture from tires: tables, chairs, sofas. The tires are converted into comfortable poufs, having previously been covered with rope and installed on the legs. There is definitely room in the yard for an additional table made from an old door. And if desired, you can install a trellis from the door leaf on the site. If there is a sufficient amount of raw materials, a gazebo, a country shower, and houses for animals can appear at the dacha.

Children's furniture

The given algorithms are successfully used in the manufacture of country furniture for children. Difficulties can arise only when selecting materials (requirements for the safety of the structure, fasteners and decorative finishes are becoming more stringent) and adjusting the dimensions. TOP best ideas for children's country furniture include:

1. Picnic sets made from wooden wire spools, painted in contrasting, bright colors.
2. Country tables with chairs made of logs (imitation of a forest clearing).
3. Lightweight children's desks made from furniture panels, installed under a canopy in the fresh air.
4. Cabinets and shelves made of pallets, boards or plywood for storing toys.
5. Folding tables made of pallets or plywood for art classes.
6. Stylized benches or sofas made of boards and artificial stone (the supports are made in the shape of animals, mushrooms or flowers).
7. Hanging swing from any available materials. Ring structures made from old trampolines, combined with textiles or straw, look especially impressive. Outwardly, such country swings resemble an Indian wigwam or oriental tents.

Preference is given to products made from light natural wood with paint and varnish coatings without toxins. Particular attention is paid to the fastening points; these areas should not be loose. When choosing the design of children's furniture for your garden, you should exclude the presence of sharp corners and weak supports.

DIY garden furniture made from pallets

List of convenient options for assembly without the help of specialists:

1. Dinner table.
2. Coffee table.
3. Armchair.
4. Sofa.
5. Bench.
6. Chaise longue.
7. Swing.
8. Bar counter.

The structure of the pallet is ideal for the installation of rectangular structures. Painting will hide the wear of the material and emphasize its shape. Medium-sized products are mobile, and the increased number of fasteners provides them with an adequate service life. Chairs and tables are moved to a convenient place on the site at the first need. Pallets must not be used without first being cleaned. They are also polished and treated with various compounds. Pallets are assembled into work tables, flower stands, and pet houses. The site is equipped to suit any needs. Sometimes entire sets are assembled from pallets, starting with ottomans, coffee tables and ending with benches and long sofas. All you need is time, material and desire - and an obstacle course or an interesting play area will be assembled from old boxes.

How to handle pallets

Pre-treatment is mandatory and ends with the application of a protective layer. Pallet preparation includes 5 stages. First of all, it is cleaned of dirt - using detergent, water and washcloths. There is no point in treating new pallets this way; simply wiping them with a damp cloth is enough. Then the boards are sanded to remove roughness and splinters. In this case, processing open areas will be enough. A small pallet should be processed manually with sandpaper. Special attachments for drills and grinders are also suitable. It is advisable to choose a well-ventilated area for work. After this, the wood is given water-repellent properties, for example, by applying a primer. For use in the garden, the oil solution will not be enough. The best solution is acrylic primer. If desired, the pallets can be painted, and preliminary priming will make this process easier and save paint. The treatment is completed with varnishing.

Coffee and dining table

To create a coffee table you will need the following tools:

• clamps;
• electric drill;
• metal mounting strips;
• connecting bolts;
• Grinder.

The coffee table is made from just 1 Euro-size pallet. Euro pallets do not take long to process, because removing irregularities from the corners and ends is enough. The tabletop is usually a sheet of plywood, which is attached to the pallet, after cutting off the excess. The fragment is screwed to the top of the box with four bolts. After installing the planks, you will also need glue. The structure is fixed with clamps, and then proceed to similar processing of the lower surface of the pallet. Pallets are used to make nice-looking dining tables. In addition to the tools for the coffee table, you will need a long pallet (more than 1.5 meters), wood sealant, 2-8 cm screws, ready-made metal supports, etc. First, the long pallet is sanded and treated with sealant. The size of the boards for the tabletop is adjusted to the dimensions of the pallet. The boards are glued to the pallet and secured with clamps until the glue dries. Then confirmations are used. Metal plates are installed at the bottom corners, and legs are placed on them.

Chaise lounge

First, visually form the back of the lounger. We place one pallet on top at an angle, and then remove several boards from the top pallet. We reduce the width of the lower pallet to a value equal to double the thickness of the end. We take into account that the opposite side ends of the upper structure do not always have the same thickness. We carefully remove the boards of the upper pallet that need to be dismantled, because they can be useful for modifying the design of the finished chaise lounge. Next, we place the backrest on the legs, and connect the seat and backrest with a few more fastenings. We choose movable fasteners to adjust the backrest, but a regular, awkward chaise lounge looks good. The finished product will need to be carefully processed and painted. As an alternative, you can make a different pattern for the back, and form the base for it as a continuation of the lower tier.

Stylish armchairs, sofas and benches

Benches are made in the following way: a standard pallet is divided into two unequal parts. A fragment with four boards will serve as a seat, and an element with three will serve as a backrest. The parts are fastened with screws or self-tapping screws, single or double fastening. Reinforcement of fasteners is carried out using bars. From the remaining boards, 4 legs are obtained, ideally wide and low. They are connected not only with hardware, but also with corners. At the end, the back is decorated: it is given a rounded shape, sometimes painted. The chairs are made in a similar way, but assembly can be done by stacking pallets on top of each other and highlighting a small backrest. U-shaped, corner and straight sofas are also assembled from pallets. For this purpose, pallets are combined into a line of the desired shape, in two vertical tiers. After this, the question about the legs will remain open. You don't have to do them. At the end, the backrest is attached, choosing the optimal height based on the parameters of the pillows.

To fasten pallets together, a hybrid of a nail and a self-tapping screw is sometimes used.

Garden swing

It is better to make supports and fastenings for a mini-attraction in the form of the letter “A”. In this case, operating the swing will be easy and the risk of injury will be reduced. The structure itself is made portable or stationary. A large tree is usually chosen as a place for a rocking chair. In the absence of such opportunities, you will have to be content with a stationary swing. For the second option, you will need a frame with an angled connection. Before installing the structure, prepare a place for installing the crossbar. The soil is compacted, after which the stationary posts are immersed to a depth of half a meter. Concrete and gravel are added to the pit. Assembly of the backrest and seat usually begins from this point. They use 2 pallets, and to create the back, one of them gets rid of everything except the bottom. Fixation of 2 elements is carried out at a slight tilt back. Sometimes the part “under” the seat is assembled from several pallets. Then load-bearing beams are installed underneath them.

Bar counter in the garden

For those who prefer to spend long periods of time outdoors, a garden bar will come in handy. Material consumption will directly depend on the scale of the project. The side base of a C-shaped counter is made from at least four connected pallets placed vertically. A linear structure is assembled from 2-3 or more. The foundation itself is constructed from approximately the same number of pallets. It is made with a depression, and the soil is strengthened with gravel. The tabletop is assembled from wide and thick elements, not from pallets. The boards are nailed to the top tier of pallets or to vertically standing boxes on the side base. The height of the bar counter must be selected taking into account the standard length of the pallet - 1.2 m. For ease of use and ergonomics of the product, it fits perfectly. You will need chairs for the counter. It is better to collect them not from pallets, but from waste boards for the tabletop. For this reason, when making the latter, you should think about the cutting points in advance.

Step-by-step instructions for making

Instructions for making country furniture with your own hands with detailed drawings and dimensions are presented in large quantities on various thematic resources. The owner of the site can only choose the type and method of assembling the structure. The general scheme of actions includes preparation of materials (the more effort spent on this stage, the longer the furniture will last), assembly, and finishing.

Soft, removable covers, pillows or capes help make country benches and chairs more comfortable.

Table

Those who are going to make furniture with their own hands for the first time should start with a table with benches made of boards of different thicknesses. Recommended sizes: from 20 mm for tabletops and seats, from 40 mm for legs with supports. In the simplest version, the table is made entirely of wood; self-tapping screws and bolts with a length of 10–12 mm are used to fasten the elements. Work begins with the preparation of materials and is carried out according to a simple algorithm:

1. The table top of the country table is assembled first: 3-4 wide boards are fastened with self-tapping screws to 3 crossbars, the structure is checked for strength and leveled.
2. 4 legs are cut out of timber or 40 mm boards, installed at an angle and secured on the inside of the crossbars. The finished structure is reinforced with 2 horizontal elements with a length sufficient to hold the seats (2 tabletop widths).
3. The boards of the benches are screwed to the fixed supports, the product is sanded, opened with primer and varnish.

Advantages of garden furniture made of artificial rattan, primary colors
A country table made according to this design can be easily rearranged and looks original. The only disadvantage of the design is poor stability. In more complex products, supports for benches are placed on the same vertical with the center of gravity, and not on the sides. Tables with metal supports, which are connected by welding or bolts, are characterized by maximum stability. If there are high demands on aesthetics, they are made curved.

Sofa and armchairs made from construction pallets and textiles

It is easier to make furniture of this type from new solid pallets, since it takes more time to inspect and strengthen old structures. The sofa drawings are adjusted to the size of the pallets (100 × 120 × 12 cm for standard ones, 80 × 120 × 14 for “euro” varieties). The sofas installed at the dacha are made of a relatively small height - 1-4 blocks of pallets, no more. The design of the furniture can be any: angular, straight, collapsible, with or without a backrest. The work is divided into several stages:

1. Preparation of pallets for country furniture. The pallets are cleaned of debris, sanded, coated with 2-3 layers of water-repellent antiseptic and dried well. At the same stage, it is recommended to paint them or open them with varnish.
2. Assembling the base. Pallets are placed on top of each other face down, fastened with screws, nails or corners. Regular pallets are covered with a sheet of plywood on top; when using solid varieties, this is not necessary.
3. Back fastening. The sawn in half or whole platform is installed vertically and fixed with self-tapping screws.
4. Preparing removable upholstered furniture. Cushions for such sofas or armchairs can be ordered in a store or sewn with your own hands from scrap materials: canvas, calico, cheap textiles. Pieces of foam rubber 20 cm thick are used as their internal filler. For external covers, whenever possible, purchase suede, chenille, microfiber or other types of furniture textiles that are resistant to fading and negative environmental influences.

When planning to use sofas made from pallets on flat areas, wheels can be attached to the bottom, but in the country this is not necessary. Hidden niches or shelves help improve the functionality of finished products. Decor options vary: from painting and combining colors with textiles to hiding the lighting in the lower part of the furniture.

Armchair and table with seats made from construction reels

Making a country table from a cable reel takes minimal time; the structure remains solid and only needs decoration. An exception is made for models with a narrow leg; in such cases, the lower disk is carefully cut off and used for other purposes (for example, as supports for benches). If necessary, the future table is strengthened, sanded with sandpaper or cleaned with a grinder, covered with 2-3 layers of antiseptic and decorated. Among the possible decor options for country furniture are:

• coating with paints and varnishes (vintage style lovers should paint the reel with white paint with the addition of dissolved soap for an “aging” effect);
• decoupage - pasting with old newspapers, magazines, textiles, special blanks or cut-outs from napkins, followed by opening with transparent varnish;
• attaching forged elements, dried flowers or lanterns to the bottom;
• decoration with rope;
• decoration with mosaics or pieces of broken ceramics.

Pros and cons of plastic furniture, features of operation and care

It is recommended to make chairs for such a set from a smaller spool (the product is sawn into 4 equal parts, secured with corners). In its absence, stools can be made from pallets or boards, the emphasis is on matching the finishing method. But armchairs or country sofas, assembled according to a simple scheme, look best near such tables:

1. The coil is disassembled, holes are cut into the disks for future seats and backrest.
2. The boards are sawn into pieces of equal length, inserted into the grooves, all elements are tightened and secured with nuts. Fastening begins with the seat, after fixing it, the frame and back boards are nailed.
3. The structure is checked for stability and evenness. When planning to use such a country chair as a rocking chair, limiters are attached to the wheels, and part of the bottom of stationary structures is cut off.
4. The surfaces of the chair are cleaned and decorated.

From whole small coils you can make comfortable poufs. To do this, all the seating parts of the set are made soft using foam rubber, furniture textiles and a stapler. The service life of such a country set depends on the condition of the coils and the quality of their preparation.

Saving on grinding or primers is unacceptable.

Swing

You should start by choosing the type of swing. In summer cottages, single varieties without additional crossbars, hanging products, and sun loungers can be installed. Maximum stability is provided by structures on two stationary supports in the shape of the letter “A”, which support any type of swing, including benches with backs for several people. To make them you will need:

1. A wooden beam with a cross-section of at least 10 × 10 cm for the side posts (from 6 m, taking into account the 50–70 cm depth of the stationary swing into the ground), supports (3 m), and top crossbar (2.5 m).
2. Beam 5 × 5 cm for armrests, backrest, frame - at least 12 m.
3. Edged boards 3 × 10 cm - from 6 m.
4. Chains designed for weights from 200 kg.

You also need to prepare fasteners: furniture bolts with washers for connecting the sides, self-tapping screws, metal corners, 2 pairs of eye bolts, screws with rings for holding the swing.

The work is carried out step by step:

1. The drain supports are rigidly connected at the top, reinforced on the sides and buried at least 50 cm into the ground (ideally, followed by pouring concrete). In order to extend the service life of the swing, the lower parts of the timber are coated with bitumen.
2. The main jumper is attached to the racks using metal corners and jibs.
3. A seat is assembled from thin timber with boards. To do this, 2 sidewalls with vertical jumpers are covered with planks using self-tapping screws. The last to be fixed are the armrests.
4. A pair of eye bolts are attached to the edges of the frame (back + bottom point of the seat), screws with rings are fixed in the upper part of the jumper, chains of the required length are secured in the rings using carabiners.
5. The finished structure is opened with varnish.

To ensure proper stability, the fastening step of the main supports of such swings must exceed the width of the seat by 50 cm. The work must be completed by checking the weight support.

Hammock

The simplest hammock for a dacha is made from a piece of any lining fabric (size 3 × 1.5 m), assembled on both sides, and two bushes of thick rope. In this case, the narrow edges of the material are collected with a loop and tied. The sequence of attachment to the tree or the edges of the hammock does not matter.

Types of shelves, storage furniture, selection criteria

A more beautiful and comfortable country hammock is made from an old metal hoop Ø 100 cm, 4 tension straps up to 3 m long, thin synthetic padding, a strip of furniture fabric 3 × 0.2 m and a square piece 1.5 × 1.5 m for the seat. The work is carried out in the following sequence:

1. The hoop is cleaned of rust or old paint (if necessary) and wrapped with thin strips of padding polyester. To attach it, use ordinary strong threads.
2. A narrow strip of fabric is pinned around the hoop, hiding the padding polyester, and sewn together.
3. A circle is cut out of a large piece of material with a diameter 20–25 cm larger than that of the hoop itself. From the remnants of fabric of the same color, 4 semicircular blanks are cut out for future notches. After that, they are sewn on the inside with 4 spaces placed under the belts.
4. The hoop is placed in the center of the fabric blank, the edges are folded and sewn.
5. The straps are pulled through the remaining parts of the hoop, their edges are looped and stitched.
6. The structure is suspended on a strong support.

For convenience, such country hammocks are hung at an angle. An old hoop is also successfully used in patterns with wicker seats. In general, to obtain spectacular products, it is recommended to use the macrame technique. Both fully wicker products and hammocks decorated with fringe look original.

Furniture made from treated boards

Working with prepared materials takes less effort, and, therefore, you can work longer and more carefully on the final result. An example of a processed material is planed boards. To assemble garden furniture, choose dry solid lumber of the highest or first grade. Then the boards will not warp or move. For a garden near an expensive house, furniture is assembled from radially cut boards with minimal texture. Conventional garden options are made from fragments of tangential or semi-radial cuts. To emphasize the natural beauty of wood, radial cut boards with distinct concentric rings are used. They are additionally varnished or waxed, but almost never painted. The material makes beautiful tables with attached chairs, armchairs, partitions, shelves and stools, as well as gazebos and sandboxes.

How to choose material

Creative garden furniture
In order for pieces of furniture to blend harmoniously into the landscape, it is worth choosing natural wood. To do this, you can use branches, trunks or tree roots, which will help create unique works.

Natural wood has a variety of shapes, which makes it possible to produce original furniture items with minimal processing. When choosing materials, you should be creative and try to see the unusual in ordinary things.

If you want to decorate your garden with not only fashionable, but also reliable items, take a closer look at a table with a base made of concrete blocks, bonded with cement mortar and then tiled. To make a tabletop, you will need 5*10 cm bars, fixed with glue in a frame. The strips forming the surface of the table are attached to the resulting holes.

Exquisite wicker garden furniture

Stylish and economical products can be obtained from branches of flexible tree varieties. Nothing can compare in beauty to wicker garden furniture. If you do not have experience in this process, stop at bird cherry branches, which are easy to process and pliable.

Video

This is how furniture is made from technorattan:

Benches and tables made of stumps and logs

The log elements are connected with dowels: into through holes made with a 20-25 mm Lewis drill. The cups in the logs are not full-sized. For benches, trunks without resin pockets and a minimum number of knots are selected, and resin particles are also removed from the surface. It is better to refuse coniferous species in principle, especially if there are no special wishes for them. The adjacent halves of the table are chamfered, and then they are firmly attached, again with wooden dowels. Stumps are used in different ways to create furniture. Firstly, on the territory itself, after the trees are cut down, stumps remain, which at any moment “will become” a chair or its likeness. But benches and tables are assembled from driftwood and stump cuts. The tops of the stumps are decorated with mosaics. Wide ones are cut so that there is both a seat and a back. A croaker is placed on top of the stumps - the bench becomes suitable for use.

Necessary tools and additional materials

On the one hand, to make many pieces of furniture you can get by with scrap materials, but to create more reliable and durable furniture you may need a specialized tool:

• jigsaw (or hand saw), circular saw
• Sander
• screwdriver
• drill with a wood drill bit to fit the screws

To create just a piece of furniture, this is enough:

• hammer
• screwdrivers
• self-tapping screws
• sandpaper
• roulette
• pencil
• fastening furniture corners

Tools that will be needed for the job.
That’s the beauty of garden furniture, that even in its wild form it looks quite appropriate. Let alone a professional approach to business - such a homemade garden interior will surprise even the seasoned.

How to care for wooden garden furniture

Wood actively responds to weather shocks, as well as to sudden changes in environmental conditions. After frequent rains combined with high temperatures, mold appears. The scorching sun causes color fading, wooden furniture to dry out, and cracks to form. It will not be difficult to periodically treat all wooden surfaces. Caring for different types of wood is almost the same, but the compositions are used only for a specific option. In any case, the furniture is first washed of dirt; sometimes it is immediately wiped with vinegar to “drive out” the pests. When everything is dry, a special oil is applied to the tree - different for each species. The procedure is not required if the furniture is coated with paint. Sometimes a plaque forms on the surface of the wood - wet wiping followed by the use of fine-grained sandpaper will solve the problem. Additionally, means are used to create a protective film.

Furniture made of metal and wood

In everyday life, you often see a combination of a wooden table top and metal legs. There is no point in changing anything in this combination. In the case of shops, sometimes they act differently. In design options with an abundance of technological forms, metal often “turns out” higher. The thickness of the seat is then kept to a minimum so that it does not warm up excessively in the sun. It wouldn’t hurt to decorate furniture that is interesting in terms of geometry. For example, internal lighting. Excellent combinations of wood and metal are found in the designs of gazebos, recreation areas, and terraces. Combinations can be diluted with stone, glass, plastic, epoxy resin. It wouldn’t hurt to fill a table with a metal mesh as a support under the tabletop with stones. In the garden, you should allocate an area for storing accessories such as shelving, and it is better to do it using metal and wood.

Garden or veranda?

When choosing garden furniture, it is first of all important to decide where exactly you will place it, and from this starting point begin to select the most optimal options in terms of material and type. Such furniture can be placed either directly in the open-air garden or on the terrace or veranda of a country house. In the first case, you should choose beautiful and functional garden furniture exclusively from materials that are most resistant to weather and climate changes, or from lightweight ones that allow you to move it to a protected place at any time. In the case where garden furniture is intended for a terrace, a more important criterion will be compatibility with the design style

.
Garden furniture will help create the right mood

Barrel furniture

Washbasins are installed in the garden or lawn. Sometimes the material is a metal barrel, and the option looks better with a dark color and matte texture. Tables with compact tabletops and chairs with the same small seats are made using the same principle. The “cherry on the cake” will be multi-colored metal barrels with cut-out holes for seats and backs from the resulting fragments. Moreover, the products will fit perfectly into a closed environment. Wooden barrels are used much more often. Parts for large and small furniture are cut out of them. Wine barrels become part of chairs, sofas, tables. Planters for large plants, a portable cooler, or an ice bin are also great options for the warmer months. Even such an unremarkable device as a garbage can is also sometimes made from a wooden barrel.

Other good options for using barrels:

• sports equipment;
• container for hot food;
• tank for summer shower.

Necessary materials, tools

The most convenient materials for making your own table and chairs for the garden are wood and chipboard. Laminated chipboard will not be very reliable, since the laminated surface is easily damaged by moisture and mechanical stress. Some parts (for example, supports) can be made of hard plastic or stainless metal. Some people like cast iron. It looks great in combination with wood - as a support for a table or the sides of benches.

For your information. Garden furniture is not made of glass (with the exception of tempered glass).

To make furniture, you can choose both traditional and unusual materials.

It is better to make the table and chairs (benches) wooden. Natural or artificial rattan is also often used. It is durable and creates country comfort.

The bars for the supporting structure of the table and chairs should be selected at a certain thickness, taking into account the load and overall style. If you plan to make benches instead of chairs, then it is better to make them more massive so that the stability of the product is higher.

The first one can be put away for storage or transported on a picnic, since it is compact, lightweight and easy to use.

To assemble furniture you need:

• hacksaw;
• self-tapping screws;
• bolts with nuts;
• screwdriver;
• Sander.

If you don't have the latter, you can get by with sandpaper. A jigsaw is useful for processing corners and carved elements.

It is better to choose projects for making furniture from several options.

From cable reels

Coils of wire find a place in interesting design objects. Original chairs with round sides, reminiscent of a rocking chair, are assembled from rounded boards. Coils are sometimes trimmed to give the shape a custom look. Stands and small tables are sometimes attached to the boards. The very shape of the spools “hints” at the possibility of being used as a tabletop and at the same time as a table base. A set of garden furniture can be assembled entirely from spools, with a minimum number of cut parts. Then there won’t be many options for decoration, but any metal products that are mounted on a wooden surface will become decorations. A minimum of effort will be required to assemble the pouf. All you need to do is sand, polish and paint the drum, then cut out the fabric and prepare the filling. Furniture is finished using furniture staplers.

Style selection

Before you start searching for material, it is recommended to choose a suitable design. To create a romantic atmosphere, you can use French classics. All you need is bleached rattan furniture.

Ready-made furniture is quite expensive, but you can make several chairs yourself in a few evenings. You can purchase either artificial rattan, which is much cheaper, or real rattan. You can view photos of handmade garden furniture now.

Comfortable and cheap furniture for friendly gatherings made from pallets. The most popular option. You can make such furniture in a matter of hours. By the way, ropes and ropes can be used as an additional set.

Modern style is usually minimalism. Furniture can be made from technorattan. This artificial material is perfectly preserved even when exposed to the sun.

From tires/tires

Garden furniture is made from tires in several ways. In one embodiment, the tires are connected without changing their shape. The second approach involves obtaining strips from blanks. Well, the last method is to cut the tires into different parts. An ordinary table is assembled from just 2 tires superimposed on each other and a tabletop made of wood or glass. One tire with a disk is enough to make a swing. If you assemble a partition with hangers and chains, then the tires on them will act as flowerpots. Original chairs are made from tires. One technique involves using a cut ring to form the back and armrests. In this case, the supporting legs and the back part of the backrest are formed from rigid half rings. The legs are placed on metal supports. The seat is made either from a round wooden board or from a plexus of rubber flaps.

Tires should be coated with a special fire retardant compound!

Master classes on making creative models

Homemade garden furniture has a number of undeniable advantages: a laconic, yet unusual and stylish design, the absence of fragile or easily dirty parts, and reliability. In order to successfully implement your own or borrowed project, it is not necessary to achieve high surface quality. Much more important is originality, the unexpected use of familiar objects in a new quality. Below are several interesting options that can serve as an example or impetus for developing your own garden furniture projects.

Bench made from old chairs

Old chairs that have served their purpose can still perform their main function for some time, only in a slightly different capacity. They make simple, convenient benches for the garden, which even inexperienced home craftsmen can assemble. To make such furniture, you can simply connect several chairs assembled in a row with one common seat. Or use the second method of creating a bench, when the base is two chairs facing each other. Their backs in this case play the role of armrests. Assembling such a garden bench is somewhat more complicated, since it is necessary to remove the drawers and make longer common crossbars.

You can approach creating a product even simpler. In this case, you will not have to remove the front legs, which will increase the strength of the structure and speed up the process of assembling the bench. The back of a piece of furniture can be made from a wooden strip attached to the upper parts of the armrests. After this, fill it with a plywood board, or install several horizontal planks to form a supporting plane.

Summer cutting table made from pallets

Pallets are convenient and affordable blanks for creating any home improvement items. They make successful furniture, easily transformed or disassembled into separate fragments. A simple garden cutting table can be made from three pallets, two of which are installed on an edge - they serve as supports. The third is fixed at the top and represents a lid (table top).

This design is as simple as possible, but the main drawback is instability. Meanwhile, creating a more durable connection is inconvenient and impractical, since this will result in the mobility of the furniture and the ability to quickly disassemble the summer country table being lost.

Experienced craftsmen advise using a slightly different option for assembling the cutting surface, which is practically devoid of the disadvantages of the method described above. Such a homemade product is good because it allows both rigid connection of pallets with subsequent grinding and finishing, and simple stacking of them on top of each other until the desired height of the product is obtained.

In addition to tables, sofas or armchairs are made from pallets. The assembly process is not difficult, and the surface relief can be made the way the owner wants. A common solution is sanding and painting the product. Alternatively, you can leave the pallets in their original condition to emphasize the camp style of the furniture.

Requirements for bath furniture, arrangement and design of the steam room

Folding table with benches

A good option for making furniture for a summer house is a folding table with benches. If necessary, it can accommodate several guests; if not needed, the furniture can be folded and put away in the barn. You can make a separate table with folding legs and two benches, or you can assemble a transforming structure, where a bench with a back turns into a table with benches on the sides.

A ready-made drawing of a folding table with benches allows you to consider the operating principle of this garden furniture and avoid errors during assembly.

Ordinary furniture bolts are used as hinges. The back of the bench “tips over” onto the seat, one half of which slides back and turns into a second bench. You can make all load-bearing furniture elements from wood or use a rectangular metal pipe. The choice of base depends on what tools and skills the master has.

The tabletop and seats of the product are in any case made of wood. The easiest way is to use boards with a thickness of 25 mm (“inch”), which must be planed and carefully sanded. It is recommended to choose deciduous wood - poplar, birch, aspen or alder. If softwood boards are used - pine or larch, you should carefully inspect them for resin pockets. They will release resin that will stain clothing or get on your skin. It is not practical to use such blanks for making garden furniture yourself.

A completely wooden country table is assembled using self-tapping screws, only the moving parts of the product are attached to furniture bolts. If the supporting structure is made of metal, the assembly is carried out entirely on threaded connections.

Drawing of a set of wooden elements for making a transforming bench

Typical drawing of a transforming bench

Bars for legs Boards for frame

We screw the legs to the planks We connect all the elements with self-tapping screws Wooden element

Ready-made wooden transforming bench assembled and disassembled

Hanging chair made of hoop and rope

This version of garden furniture is suitable for macrame lovers. The main supporting structures are two hoops connected at an angle to each other. One of them forms the plane of the seat, and the second is a unit that combines the back and armrests of the product.

The hangers are made from nylon cord, braided using the same technique as filling the seat and backrest. For the seat, a hoop with a diameter of 70 cm is used, for the back - 110 cm. The length of the hangers for the garden chair is chosen based on the existing conditions. Typically, the support is thick tree branches or (more often) horizontal beams installed on supports between two adjacent plants, buildings or other structures. To make a chair you will need to prepare:

• about 900 m of cord for weaving;
• slings for suspensions (about 12 m);
• metal-plastic pipes - about 6 m.

The production of the structure occurs according to the following scheme:

1. The hoops are made from a metal-plastic pipe with a diameter of 35 mm. The length of the workpiece is calculated using the school formula (for hoops of the indicated sizes 110 and 70 cm, you will need 345 and 220 cm of pipe, respectively).
2. The ends of the blanks are connected with inserts made of wood or plastic, which are fixed with self-tapping screws.
3. First, the surface of the hoops is tightly wrapped with cord. Then the area of ​​the smaller one is filled with mesh.
4. After this, both hoops are connected so that on one side they are connected tightly, and on the other they form an angle of lifting the backrest.
5. Next, the side vertical surface is filled with weaving, the method and pattern of which are selected to suit your taste. The slings of the hanging garden chair are braided in the same style as all other surfaces.

For the seat of a hanging garden chair, it is worth making a soft, removable cushion; it will simultaneously serve a decorative and practical function.

Universal bench-stand for summer residents

The universal “upside-down” bench is a favorite piece of country furniture for all those who like to grow gardening plants. The product serves as a good assistant at work, as a means of relaxation, and can perform other functions.

Making original garden furniture with your own hands, examples of decor

In one position, such a country bench is an ordinary seat, and if you turn it over, a comfortable knee rest appears. For production, wooden boards or polypropylene tubes are used. The choice of material is determined by the preferences and skills of the dacha owner. Assembling a wooden universal bench is not difficult:

1. Three blanks are cut out - a seat and two side supports.
2. The bench parts are assembled using glued dowels or metal corners. For reinforcement, it is recommended to glue wooden bosses to prevent the structure from swaying diagonally.

The disadvantage of a bench made of wood is the lack of elasticity and rapid loss of rigidity of the joints, which is why most dacha owners prefer plastic products. To assemble a “changeover” from polypropylene, you will need to purchase 4 m of tubes with a diameter of 32 mm. In addition, you will need angles and tees (fittings) - 8 pieces of each. The assembly process is carried out according to the instructions:

1. Using a hacksaw (or a regular saw with a fine tooth), cut six pieces of length 24 and 14.5 cm. Then 4 pieces each - 34.5 cm and 3 cm.
2. Using a plumbing soldering iron, the middle part of the product is made - from 14.5 cm sections and two 24 cm crossbars.
3. Then 4 vertical supports of 34.5 cm each are attached to them, onto which corner fittings with 24 cm crossbars are soldered.
4. At the bottom of the bench, 3-centimeter inserts with fittings and the same crossbars (24 cm) are attached.

The last step is to install plywood platforms on the working surfaces. You can glue pieces of tourist foam to them to make it softer to sit on or rest on your knees. This garden structure is lighter, stronger and not susceptible to moisture.

Cut two trapezoidal legs

Make holes for ease of carrying and operation

Drill holes for the pins Make holes in the sides

Drive in the pins, coated with glue, and connect to the sidewalls

Finished bench

Made from PVC pipes

PVC pipes are a good option for high chairs. First of all, the elements themselves are studied in order to create an accurate installation drawing along with the mounting option. Individual pipes are prepared and, if necessary, cut. The frame is assembled using glue and fittings, and if necessary, soldering. Then prepare the seat: a thick fabric option is suitable - for example, for a folding version. You will need to check the strength of the seat with the frame. Painting of pipes is carried out before final assembly. In most cases, it is better to leave the original color, especially since the external imperfections of furniture in an open space can be presented as an original solution. A product made of polyvinyl chloride is sometimes decorated with decorative self-adhesive film. Painting and curly slots will add originality. In addition to chairs, it wouldn't hurt to try your hand at creating a swing. Then there will be even more options for decor.