How to repair a sofa at home?

How to repair a sofa at home

The information below will help you find out how to properly cope with such a task as repairing a sofa at home.
Read step-by-step instructions for reupholstering furniture. The article also explains how you can repair or simply replace the spring unit if it is broken. Over time, the upholstery and various elements such as springs or moving parts in the sofa wear out. Because of this, the surface is pressed and takes on an unsightly appearance, and it becomes uncomfortable to sleep on. If you can buy a new one, then you can throw away the old one. But how to repair a sofa yourself? After all, this will significantly save money.

Restoring sofa springs

During self-isolation, the main household tool failed. The spring from the shock-absorbing unit of your favorite sofa burst.

I slightly missed the bottom spot. He lifted the seat and inspected the underside.

What the hell, if all the energy went up? He cheerfully unscrewed the sofa.

So, the furniture makers made it very well. A big rarity these days. I went to the store to buy a stapler. And at the same time I bought a staple extractor.
Without this unit, I don’t know how I would have taken out the 556 staples securing the casing and the inner layer of shock absorption! The guys worked conscientiously and beat the staples in three rows.

The autopsy showed.....

EIGHT!!! The spring is broken. And what kind of place did it break?

I tried to secure it with steel wire. Doesn't hold well. The design thought stopped there. I went to the store again, this time for fasteners. Maybe after looking at the assortment I’ll come up with something.

The eye rested on the 3mm cable clamps. The price is small. I took a couple of options. I will think about how to assemble it, locally.

How did I collect this...if without swearing...then I was silent the whole time.

The springs that are closer to the surface of the sofa and the lower part of my body needed to be deployed with mounting bolts inside the structure. Otherwise they will break through the casing. Finished it in an hour.

The springs in the depths burst in an extremely inconvenient way. It was difficult for the little hands to squeeze through the coils of the spring block. It is impossible to screw the nut into the end. I went to the car to get the keys.

Well, I don’t have a key for 7!

I turned the whole house upside down and happiness came into my hands. There is a “butt” at 7!

Another two hours of work...well...in complete silence. I secured eight springs.

I used a new stapler and it turned out to be a normal machine. I took the cheapest one, for one resource sofa. He drove about ten staples up to the top of the plywood.

I assembled the sofa..... It took 4 hours to do everything. The sagging of the casing...I perceived...well...completely silently, Like a fish.

The wife said she had never heard such silence. I disassembled the casing using an extractor. I pulled it up well and put it back together. Now I didn’t count the staples, but there were very few left of the thousand.

Another hour and a half. It worked out well. From children's poems “And I became so good, I didn’t recognize myself.”

It’s a pity, of course, that the excellent work of the furniture makers was let down by a defective spring block.

I wrote a message to the factory and noted the excellent design and good work. Quite seriously.

The question/topic is automatically published on social media. site network - keep an eye on the answers there:

Become the author of the site, publish your own articles, descriptions of homemade products and pay for the text. Read more here.

Step-by-step instructions for repairing a sofa

Almost all repair work requires complete or partial disassembly of the sofa.

1. Remove pillows from the sofa and check the upholstery.
2. Turn it over so that you can inspect the frame.
3. Carefully check the wooden parts for breaks and rot.
4. If you need to replace the upholstery, you should purchase fabric for this.
5. Replacing the frame will require the purchase of plywood and special screws.
6. Before you repair your sofa at home, it is important to check the areas under the cushions. If the platform underneath is broken, a support should be attached. Stores sell ready-made parts made from fiberboard.
7. You can use thin plywood, the size of the pillows. This will help them not to sag.
8. Check the integrity of the spring. If they are simply bent, you need to put them in place using pliers. If damaged, they should be replaced with new ones.
9. Check all the pillows one by one, because they may be the reason why the sofa is sagging. If you find that they are too soft, you need to add a similar filler or install a foam seal in the upper and lower parts.
10. Strengthen the back part, as well as the frame, with tape.

After eliminating damage to the upholstery, frame and filling the pillows, the cause of the sagging has not been corrected, before repairing the sofa with your own hands, you should add support to the entire back of the furniture. To do this, take the tape and wrap the fabric so that it looks like a spider's web. This will be a big help in supporting the frame and rear end from sagging.

What do you need to work with a sofa?

Sagging sofa

Repairing a dented sofa is easy if you prepare in advance all the elements necessary for the work. The final result depends on you, because you can make it harder or, on the contrary, correct it and create a soft sofa that resembles a feather bed. Any sofa will eventually sag, so you need to be prepared for this course of events. So, in order to restore sagging sofas, you need to have on hand:

• foam seal;
• pliers;
• foam;
• fabric tape.

Sofas are the part of the furniture on which household members spend most of their time. Therefore, it’s normal to push through over time, the main thing is to know how to correct the situation.

Difficulties at work

If you need to change the upholstery, you must first remove all the staples that secured the fabric. But before you repair an old sofa with your own hands and make new upholstery, you should remember that this is not so easy, because:

• cutting of all the necessary parts should be carried out strictly according to the patterns;
• furniture may have a complex design that is not easy to understand;
• elements may have unusual geometric shapes, which complicates the cutting and upholstery process.

Tips and mistakes

In particularly difficult situations, it is worth consulting with a specialist before starting repairs. You should handle the sofa very carefully when repairing the box spring, otherwise there is a risk of injury.

Be sure to use goggles and gloves for protection during restoration work. If the problem seems too complicated, then you should invite a specialist.

Let's look at the main mistakes when doing DIY repairs.

• Incorrect cutting. It is recommended to cut new fabric over old upholstery. If this is not possible, then you should take accurate measurements from sofa cushions or other elements.
• Use of untreated wood parts. The wood for the frame must be dried and impregnated with an antiseptic. Otherwise, the part will soon begin to rot.
• Neglect of additional fastenings. It is recommended to reinforce new parts on the frame with metal corners. This will make the design more reliable.
• Large distance between furniture stapler staples. The upholstery must be secured using a special method so that it does not come apart. The staples should be placed at a distance of no more than 20 mm from each other.

Over time, any furniture loses its original properties, and the question of replacing it with something else becomes acute. Good quality furniture is quite expensive, but the old module has a strong base, and the model fits the interior.

Then DIY sofa repair becomes popular and a more economical option to get an updated piece of furniture. You can use the services of professional craftsmen or arm yourself with tools and materials and carry out all the work yourself.

Materials and tools for repairing a sofa

If the service life of the bedroom furniture has expired, the sofa may need not only replacement of the upholstery, but periodic or major repairs. These processes can be performed with the help of specialists or independently.

Before you repair a spring sofa at home, you need to have a good tool for the job:

• set of wrenches;
• scissors for cutting material;
• nippers, side cutters;
• construction stapler;
• sewing machine;
• strong threads;
• accessories for decorating pillows: buttons, appliqués.

Classic sofa pie with a spring block and possible problems

To understand how to repair a sofa at home, you need to know what layers of materials are needed and in what order. For example, in a sofa seat with a spring block the sequence will be like this (from bottom to top):

Frame made of plywood or wooden blocks . A plywood frame is more reliable, but it takes longer and is more difficult to make. Therefore, pine bars are usually used. They are connected according to the tenon-groove principle, gluing the joint with wood glue. If desired, the connections can be strengthened with dowels or corners (aluminum).

What layers should there be in a sofa seat?

These are all the layers and their features. You can add something (for example, a double layer of padding polyester), but removing it is highly undesirable.

Stages of work

Reupholstering a sofa involves several important processes that must be performed very carefully. Disassemble all the components: pillows, sides, various poufs. To do this, you should use a tool.

Before you repair a sofa book, you need to:

• disconnect the sidewalls and overhead parts;
• place all metal fasteners in a separate container so as not to lose them;
• remove all the old upholstery, but carefully so as not to damage it, since it can serve as a template for making new parts;
• clean the furniture of debris, vacuum the entire space inside;
• if there is foam rubber inside, there is no need to feel sorry for it, you need to throw it all away at once;
• inspect all metal parts, as well as springs, and eliminate any defects;
• replace old fabric or nylon stretchers with new ones;
• Tighten all fixing elements and glue the joints on the wood parts.

If a problem arises with the wooden parts during the work, a carpenter can be found here. Also, if after the renovation there is a lot of garbage left, then you can find a cleaning specialist here.

Step-by-step description of the work

First, you should turn your sofa over so that its frame can be seen. All work depends on this action, since this is the only way to understand what is damaged in the furniture. Most often, in this case, the frame itself breaks, less often the foam rubber and upholstery are dented. In any case, the damage can be fixed.

When replacing the frame, you need to install not only new boards, but also all the screws, since corrosion can form on the old ones, causing various types of fungi. With foam rubber things are even simpler; just use an anti-stapler to remove the upholstery and replace the soft part.

In some cases, people try to immediately change the upholstery of furniture, because in this way it looks newer and fresher, but at the same time has a shape familiar to household members.

How to fix a sofa yourself if it collapses in the middle? Check the places where the pillows are placed. Perhaps someone just sat down very sharply and broke the base. Replacing it is simple; you just need to remove the cushions, select the boards to size and secure them carefully. You can put plywood on top for density.

A bigger problem could be that the springs on the sofa break. In order to restore furniture, you will need to remove the upholstery, the soft layer and find the cause of the unevenness. Then you should carefully remove the broken part with pliers, and then screw in a new spring. They are sold in many hardware stores, so you won’t have to look for a long time for the part. The main thing is to secure it tightly at the base, otherwise you will have to disassemble the upholstered furniture again.

In some cases, the pillows themselves may be the cause of the unevenness of the sofa. For example, after washing they became much softer than before, and now, when you sit on them, you feel like you’re falling through. Fixing this problem is as easy as shelling pears. You need to add more filling to the pillows, and then carefully sew them together.

Before you begin, evaluate the problem at hand. Based on this, already purchase the material and start doing business. Remember that even a beginner in this field can easily cope with the task.

join the discussion

Share with your friends

Each apartment has a sofa on which all family members often gather. Over time, the furniture cannot withstand the load, and sagging spots appear. This spoils not only the appearance, but also the functionality of the sofa. Fortunately, you can solve the problem yourself and without major financial expenses.

Cutting material for sofa upholstery

The final result of the entire reupholstering process depends on how accurately the patterns are made.

1. Buy upholstery material with a reserve; it is better to use the remaining pieces to decorate stools or additional pillows than to buy more later.
2. Place the old upholstery on the new material and stretch it evenly.
3. Make sure that there is no distortion in the fabric itself, as well as in the pattern.
4. Draw a marker around the borders.
5. When making a drawing according to a pattern, you need to leave an allowance of approximately 2 cm.
6. Cut with sharp scissors.
7. Foam rubber is cut in the same way as fabric.
8. Assembling the new structure is done in the reverse order.

Sofa spring repair

Sofas that are made with springs last a long period. But, the time comes, and they, like other parts, need repair or replacement. You can carry out these processes yourself, but in this case you cannot do without costs. Before repairing the spring block of the sofa, you should determine where the breakdown occurred. This is usually visible as a tissue break appears at the site. First you need to visually inspect the damage. To do this, tear up the foam rubber and remove it with felt. Pull the spiral to break, if there is a crack in it, although it may not be visible at first glance, it will burst.

How to fix a sofa

First of all, it is necessary to determine the location and extent of the damage . To do this, you need to look at the root of the problem. Pull the sofa to the center of the room and look inside. Perhaps the breakdown is hidden inside.

Often in such cases, the frame bar breaks or the filling in the pillows is pressed through. If the sofa has a spring base, this may be the problem, but do not despair.

Once we have identified the problem, we move on to repairs.

How to replace the filling of sofa cushions

There is nothing easier to repair a sofa than replacing the filling.

And sometimes you don’t need to change it completely; simply adding filler inside the pillow can save you. This happens if the pillows have been washed several times. During washing, the filler clumps or simply becomes softer. This gives the feeling of the sofa sagging.

Fixing the pillows will not be a problem. We carry out the work in this sequence.

• Carefully open the seam on the side of the pillow.
• Add filling, being careful not to overfill, otherwise the pillows will become hard and uncomfortable.
• If necessary, replace the filler completely.
• Don't forget to sew the seam carefully.

Important! Try to use the same filling that was used in the pillows.

If the casing becomes worn, it must be replaced. Choose a color similar to the original, or use a contrasting combination.

How to repair a spring block

Sometimes it happens that, in addition to squashed pillows, springs break.

In this case, it is necessary to remove the casing without damaging it, unless it is worn out and requires replacement.

After this, you need to find the broken springs, carefully remove them and replace them.

Furniture springs can be found in hardware stores, or you can use an old mattress that has become unusable.

In some cases, the springs are simply compressed, and their repair consists of re-tensioning the spring.

After replacing the spring, make sure to secure it correctly, otherwise you risk getting an injection when using the furniture.

If the trim does not need replacing, simply put it back on and secure it with a furniture stapler.

Advice! To avoid injury, use pliers to replace the spring.

How to fix a frame

If, after looking inside the sofa, you find that a part of the frame is broken, do not panic. Any damage can be repaired with your own hands.

The sofa sank. What to do?

Having returned from another vacation to your favorite home, you notice with great surprise and disappointment that your old, but so comfortable and beloved upholstered furniture has sagged, and no longer seems so attractive and comfortable. And you still realize that in fact this is the case, the furniture has changed and, unfortunately, not for the better.

Once upon a time, or recently, you came tired from work, plopped down on a brand new, or not quite, but comfortable sofa and, watching your favorite series on TV, or cheering for your favorite team or our guys at the next competition, just relaxed and rested. Now the appearance and comfort of your favorite sofa remain only in your memories. So why did this happen, and what is the best thing to do in this situation.

Now the question arises - to spend time looking for a new set of upholstered furniture that would be just as comfortable, and fit into the interior just like the old one you are already familiar with. But then what to do with the old kit? The way out of the situation lies on the surface, turn to the craftsmen who will return your furniture to its original condition, its former splendor and convenience. Is it possible, you ask, the answer is of course, everything is possible.

But the question haunts me: why does this happen? The answer is quite simple and banal - nothing is eternal, everything has its own service life. Well, why does upholstered furniture serve everyone differently, for some it stays like new for 10 years, while for others it already sags after 5 years? It is difficult to give an immediate and unambiguous answer; many factors influence it. But one of the reasons is the filler; most often it is the filler that sags. So a sofa with a spring block will last longer than a sofa filled with polyurethane foam (PPU, or as it is popularly called - foam rubber). How bad it is that the sofa sank!

The springs in the sofa sagged

Springs have been used in furniture for a long time, but they have been used in mass production since about the 30s of the last century. The most popular spring block for sofas is rightfully considered the “Bonnel” block of springs “bound by one chain.” After all, the springs in this block are heat-treated, with a cyclic load of up to 180 kg. serve for 15 years or even more. The main advantage of such a block is progressive elasticity; The springs initially seem soft (comfortable and pleasant), but as the load on them increases, their stiffness increases.

Less commonly, modern independent spring blocks TFK and Multipocket are used as filler in upholstered furniture. These blocks are widely used for making mattresses.

Springs were also used in ancient and antique furniture, but they are much larger in size than modern ones. They can be considered both independent (they were not made into ready-made blocks) and dependent (they were woven together with twine).

But the springs are still made of steel wire, although they are tempered for strength. And as they say, nothing lasts forever under the sun. Likewise, the springs in the sofa begin to sag over time, especially in their favorite places where they sit most often. They often break in these same places. But what is especially unpleasant in this situation is that broken springs begin to come out through the upholstery, and you can easily cut yourself on them (hardened broken steel has sharp edges). If the springs stick out, they must be replaced or replaced.

And what to do if the spring in the sofa breaks? The entire unit needs to be replaced. But isn’t it possible to replace only the broken one? You ask. It is possible, but not advisable, since there is no guarantee that after some time the spring adjacent to the new one will not break. Because of this circumstance alone, it is better to immediately replace the entire old spring block with a new one. Replacement of one spring is carried out only in sofas with independent springs.

Professional upholstery, reupholstery, repair of upholstered furniture in St. Petersburg. Restoration of antiques.

I wrote the first note myself, then I found the second one on the Internet on the website of our colleagues from Chelyabinsk (https://novamebel74.ru/Mebelnie_materiali.html). It feels like it was written not by a journalist, but by a knowledgeable person who works with furniture with his own hands. Independently of each other, we came to the same conclusions.

Is it better to buy new upholstered furniture than to reupholster the old one? Moreover, new furniture is now so much cheaper! There are discounts and sales all around. Manufacturers compete with each other to see who can make and sell a sofa cheaper. At the same time, in conditions of crisis and increased competition, small furniture factories are simply forced to reduce the cost of their products to the detriment of quality in order to survive. What can you save on to make an “Anti-crisis sofa”? The base of the sofa is a strong wooden frame made of thick dried planed boards. But buying dried boards is expensive, why waste money when raw thin blocks are cheaper. Planing them and drilling out knots, gluing wooden plugs in their place, like in Soviet times, is a waste of time. Time is money. And no one cares if the sofa frame cracks at a knot. Next, plywood must be glued and often nailed onto the assembled frame. Plywood also costs money, it needs to be replaced with fiberboard (hardboard) or even with strips of calico scraps. And to glue it in order to avoid squeaking - but who needs it, it won’t squeak right away, and you can’t get enough of expensive glue. You need to put two layers of batting on the fiberboard so that the spring block doesn’t scrape on the bottom, but you don’t have to put it - on one sofa you save several tens of rubles, but on a factory scale? The spring block can be made sparse by reducing the number of springs per square meter, and there is no need to make a frame around the perimeter of the spring block - it’s cheaper. Only such a spring block does not hold its shape, but these are minor things. It needs to be covered with something so that it does not cut the soft flooring. In Soviet sofas and furniture from socialist countries it was felt, edging, durable burlap, batting and similar durable materials. Nowadays, it is enough to throw thin spunbond or calico on the springs - it will last for some time. Polyurethane foam of high density and durability is now becoming a luxury, used only in luxury sofas. For the people, packaging foam will do. It’s cheaper, lighter, and you can fit a lot more of it into the car because it’s easy to crush—all advantages. Foam rubber must be insulated from upholstery fabric with a layer of batting or padding polyester, but why? It's not visible under the fabric. But on the fabric you can sew cunning edgings, stitching of sophisticated shapes for visual appeal - so that you can immediately see: this is not like before, this is modern fashionable furniture. And these are not all the tricks that people who want to save money fall for. So it’s not always worth thoughtlessly getting rid of high-quality furniture made at a time when manufacturers could afford not to save money, just on the grounds that it is old and outdated - many models of old furniture are superior in quality to cheap modern ones. PS All of the above does not apply to large well-known manufacturers who have earned a name for themselves in the market. For example, M&Z, March 8, Terminal, Sumo, Moon and some more. Furniture produced by them can be purchased without fear; they can afford to purchase expensive, high-quality components and materials, and pay decent wages to employees. Unfortunately, quality costs money, which affects the availability of furniture from good manufacturers. The article is the property of novamebel74.narod.ru

Today, many buyers are looking for furniture with a spring block, arguing as follows: “I had a sofa made of foam rubber, so it quickly sank.” But the old Soviet sofa with springs is still alive.”

This is how a myth is born: Springs are good, but foam rubber is bad. Why the foam rubber “sank” and what to do if this happened, we will clarify below. But is it worth trusting the spring block so much, relying on its durability?

Unfortunately no. That is, of course, high-quality spring blocks made in compliance with competent technology will last a long time. But do most sofas have them? So what is a “block spring”? These are the metal springs themselves and what lies on them.

Making a high-quality spring is not an easy task: if you overheat the wire, such springs will break; underheat them, they will “sag.” It is very important what the manufacturer puts on top of the springs. If in Soviet times there were GOST standards for this, now they can use anything. Often this is a layer of cheap non-woven fabric and foam rubber is not of the best quality. The springs cut into and crumble the foam. As a result, the service life of such a spring filling is a maximum of a year... Look at the filling of high-quality (expensive) spring mattresses and you will understand why you cannot buy a sofa “with springs at the price of foam rubber” - the manufacturer clearly saved money by violating the technology. When choosing a spring filling, always ask the question: “What materials are used for the layers above the springs?” At a minimum, this should be: durable fabric covering the springs directly; a thick layer of batting (not only above the springs, but also under them - to prevent squeaks), and only then foam rubber (and the requirements for foam rubber in spring blocks are even higher than for foam rubber for seats). The use of thermally bonded felt, coconut fiber and latex is encouraged. Springs also have disadvantages such as “noisiness” and limited shape. In case of repair, replacing springs will cost you much more than replacing foam rubber, and is often simply impossible.

Types and types of mechanisms

Today, furniture production has a large number of types and types of mechanisms. The photo below shows only some of them (the most common):

Click-clack

Album

Sofa mechanisms Click-clack

Album

Sofa mechanisms Click-clack

The click-clack mechanism has three positions, one for lying down and two for sitting. Usually installed on modern lamella-type models.

Meralax

Album

Meralax sofa mechanism

Album

Meralax sofa mechanism

Meralax is one of the reliable French clamshell layout mechanisms. It has an orthopedic effect in two versions - lamella and metal weaving.

Dolphin

Album

Dolphin mechanism

Album

Dolphin mechanism

The “dolphin” mechanism is exactly the option that combines compactness and convenience. The seat is attached to the side parts of the frame, pulling the mechanism out of the niche “towards you” to the upper horizontal position by the transverse bar and we get a full-fledged sleeping place.

This is the simplest of all existing mechanisms. When made of high quality, it is stable and durable, but, as a rule, the metal from which it is made leaves much to be desired.

Accordion

The “accordion” mechanism is one of the most popular mechanisms for transforming sofas; it has three layout positions.

One part is fixed, the other two have moving parts that are secured with locks.

Now it is installed mainly on modern models of upholstered furniture.

The most common mechanism is installed on a sofa book. It is quite simple in layout and has a number of advantages over other models. The entire structure is made of thick metal and high-quality rivets.

Repair of the “sofa book” mechanism

Before starting repairs, you need to determine the extent and cause of the breakdown. As a rule, it is mainly the rivets of the guide strip that are bolted to the sofa frame that break here. They fly out completely or wear appears, leading to an increase in gaps.

For work we will need tools:

1. Drill or screwdriver
2. Rivets
3. Hammer
4. Anvil or any other massive stand

It is necessary to firmly fix the mechanism on the table surface, for example, using clamps. Using a drill, we drill out the broken rivet, starting with a small drill and gradually moving to the desired size.

To select the required drill diameter, the size of the rivet and its thickness, we measure it with a caliper. We insert it into the hole, with the cap down, and the part that will be riveted should face up.

If it is not possible to repair the mechanism using rivets, the bar can be secured using a bolt and nut.

Here it is very important to choose the right length so that the bolt does not rest against the frame from the inside, because cutting it off after installation will not be very convenient!

Repair of the accordion sofa mechanism

This design has a number of small details that affect the correct layout of the sofa. Naturally, repairs will have their own difficulties, but with the right approach this issue can be resolved.

The figure shows the main elements of the “accordion” (its most vulnerable parts), since they bear the main load.

After the expiration of operating time, some of them require, at best, repair, and at worst, replacement.

The rollers must be replaced . At home, you can change the polyurethane wheel base by choosing the desired size (height). Having drilled out the mounting axle, it can be replaced with a regular bolt with two nuts for better fixation of the wheel.

Beech slats, due to their rigidity and strength, are almost impossible to break, although there are exceptions to the rule. Mostly the fasteners that “hold” the lamella break.

The photo shows that the lamella insert is attached to the metal frame using rivets.

Specialized stores sell almost all furniture fittings, including the “pockets” we need.

To replace them we will need a drill with which we need to drill out the rivets. We check their width and thickness to ensure that there are no unnecessary gaps.

Riveting can be done using smaller or larger hammers or using a special rivet setting tool.

But the best option for installing the slat holder would be a regular bolt and nut.

Repair of the sofa mechanism “Click clack”

Today, the quality of operation of “Click Klyak” mechanisms leaves much to be desired. Manufacturers do not pay much attention to strength, counting on a large frame area (the larger the area, the more stable the product).

The body bends in places where the weight is localized, since it is made of sheet iron, and this breaks the transformation lock itself.

At home, making repairs can be very problematic; only complete replacement is possible.

In order for the mechanism to serve for a long time, it is necessary to lubricate the rubbing joints in a timely manner.

In the figure below they are shown by arrows.

A common cause of breakdown and rapid failure of the mechanism is incorrectly tightened fastening bolts between the wooden frame and the mechanism.

During operation, large gaps appear, which lead to distortions and wear.

Mechanism repair

If during operation the back or seat does not fold or this happens with great effort, or they are skewed relative to each other, then repair of the mechanism for transforming the sofa-book is required.

The extent of the problem can only be discovered after disassembling the product. To do this, you first need to remove the armrests (most often they are secured with two bolts); in order to dismantle the moving parts, you need to unscrew the fasteners in the mechanism itself.

The system is now fully visible, but still attached to the sofa frame. If all components are intact, there is no play or other signs of loosening, you can simply lubricate it and lift the fastening bolt. Even the presence of rust does not mean complete failure. You can get rid of it using special chemicals.

If the rivets that connect the moving elements of the sofa-book mechanism break, they can be easily replaced with others. Before this, you should remove the mechanism, clean it, get rid of broken parts and install a replacement.

In extreme cases, especially when the sofa book has been in use for many years, the entire mechanism will have to be replaced. The design is easy to purchase at any furniture store at an affordable price.

A special feature of the Eurobook sofa is the presence of a double transformation mechanism, one part of which allows you to move the seat forward, the second lowers the backrest into the resulting space. Repair or replacement is carried out similarly to the case considered, with one difference: the retractable mechanism is equipped with bearings, which break most often. They will need to be replaced.

The click-klyak model has a base made of a metal frame to which all the moving elements and slats are attached. If there are problems with folding out or 1 rail is broken, you will first have to remove the upholstery, conduct a detailed inspection followed by repair work (replacing fasteners, broken slats, lubricating moving elements).

Repair of a sofa roll-out mechanism

The roll-out mechanism of a sofa is one of the most durable and reliable structures, but, as it turns out, it can also become unusable in a very short time.

The reason for this fragility is the poor quality of the layout elements, in particular the rollers. For reliable disassembly and assembly of the mechanism, the rollers must rotate easily and slide unhindered across the surface.

Watch the video of how a home mechanic changes the guide roller of a sofa with a Dolphin mechanism:

This article described only the main causes and options for breakdowns of sofa transformation mechanisms, which almost any owner can do without special training.

Warning

You should always remember that only a trained specialist with the necessary set of tools can carry out a major repair of the sofa folding mechanism. He will always be able to accurately determine and eliminate the cause of the breakdown at a high quality level.

Without the proper experience, such repairs can lead to even greater malfunctions, therefore, if a problem is discovered, very carefully study the cause of the breakdown of your favorite sofa, evaluate the complexity of the design and your strengths, and also, if you still decide to repair the sofa mechanisms yourself , approach the process itself very responsibly.