Baby round transformable cribs for newborns: sizes, how much they cost

Features of a round transformable crib

The main difference between this toddler's sleeping place is its appearance. If the usual standard crib is always rectangular, then this one has the shape of a circle. The second feature is functionality. Since a tiny round crib cannot be used for long (the baby is growing), its design allows for changes and modifications. This makes it possible to call it a transformer.

Materials

Round cribs are usually made from natural materials. Wood manufacturers usually choose birch, aspen or beech. Pine is also used, but it breaks down faster - it is not as dense. Paints are only non-toxic, specially made for children's furniture.

A round bed can consist of the following elements:

Solid half-arches;
Quarter circles.

The first option is more reliable - it does not have two connecting seams, which makes the structure stronger. The second option is cheaper.

Functionality

For a newborn, a small round bed is better than a large classic one, according to manufacturers. The small size of the bed reminds of the most measured time of the baby - in the womb. This means that the baby’s sleep will be calmer and he will feel more protected.

This bed itself is not durable. Babies are growing quickly, they will not have enough space. In order to be able to use the sleeping place longer, the crib can be extended and its bottom can be lowered as needed, thereby increasing its service life. How long it can last depends on the modification.

The baby's cradle is already too small

Dimensions

A round transformable crib for newborns usually has a bed diameter of 75 cm. This is an average figure, it may vary from manufacturer to manufacturer. The enlarged sleeping area becomes approximately 125x75 cm.

Interesting. There can be only one mattress: if it is a transformer, then an extension part for a larger bed is attached to the small round one (for a cradle). You can buy two different, separate mattresses.

Available in oval or semicircular

When a round bed for newborns grows after its owner, it becomes oval. Extension sides are inserted between the two semicircles, new slats are added to the bottom, and a new mattress is placed - the sleeping bed for an older child is ready. Moreover, at this moment you can lower the bottom a little lower so that the baby, who is learning to sit down, cannot fall out.

There is no semicircular bed. Experience shows that it is impractical. However, the seats of chairs can be semicircular, which can be made from a bed later (more on all the transformation possibilities below).

Round transformable bed for newborns - advantages and features

A multi-component round transformable bed will be an excellent addition to the classic and modern interior of a children's room. Babies spend most of their time in the cradle, so the furniture must be spacious and safe for children aged 0 to 3 years.

A crib with a transformation mode is a combination of several items that are actively used when caring for a baby. The design can be converted into a playpen, a sofa, a changing table and even a full-fledged sleeping place for children aged 3 to 6 years.

Advantages and features of a round crib:

Compactness. The design consists of many components that take the place of a regular cradle. Elite furniture models have drawers for storing children's clothes and toys.
Ease of transformation. Parents can independently assemble and transform the cradle into a full-fledged bed, playpen or convenient changing table.
Great review. Parents can watch their child from any corner of the room.
Elegant and original design. The crib will fit perfectly into the design of the nursery.
Safety. Designers of children's furniture try to smooth out sharp corners that can harm a child who begins to crawl or roll over. The frame is made from natural materials that are safe for the baby’s health.

The service life of a baby crib is on average 10 years. Worn structural elements can be replaced, thereby updating or modifying the furniture. Many models are equipped with canopies, rocking mechanisms and wheels for moving the crib.

In the interior, a children's round bed will attract attention, so you should carefully study its configuration. The transformation happens in a matter of minutes. You can adjust the height of the base of the bed, transforming the crib into a full-fledged playpen or changing table. Some models expand in diameter and are divided into two chairs.

A transformer is more expensive than a regular bed for a newborn. The price depends on the configuration and number of functions. If you add up the cost of purchasing the structural elements of such furniture separately, purchasing a crib with a transformation mode will be a profitable investment.

Pros and cons of a round crib

DIY crib bumpers for newborns

Every day there are more and more mothers who give their preference to round and oval beds. Here's what they like:

No corners. The coordination of the baby's movements leaves much to be desired. He may fall; hitting a corner (especially with his head) can cause injury. In addition, corners are a source of creaks and loosening. Therefore, a round cradle is safer and more comfortable.
Mobility. A round baby bed is usually equipped with wheels. Thanks to this, as well as its compact and lightweight design, you can easily move it around the house with you.
Beauty. Many mothers choose this first piece of furniture for their baby precisely because of its stylish design. The most popular color is white, which is suitable for both girls and boys. Beige shades and dark tones are used less often. Very rarely – bright colors.

Design of a nursery with a white cradle

Long lifespan. This indicator depends on the possibilities of transformation - from 4 to 12 years.
Space saving. For the first six months of a baby’s life, its bed is more compact and will fit even in a small corner.
Convenience. You can approach the bed from any side, place it along the wall, diagonally from the corner, whatever you like. In addition, it is more convenient for a little person to view the world from it.
Baby's comfort. A small cradle is considered the best option for a newborn. She reminds him of his mother's womb and gives him a feeling of security.

Such transforming beds have disadvantages:

No drawers. The design usually does not provide for them. The maximum that can be installed is a pendulum system for the cradle.
Price. As a rule, such furniture is more expensive than classic options.
Several mattresses. One, as in a standard rectangular bed, is no longer enough. You need to buy either two, or a transformer, this will also be more expensive.

What additional features are equipped with round models of transformable children's beds?

Additionally, a round bed for small children is equipped with decorative components, as well as soft sides and pillows. In improved models of furniture, a canopy and a motion sickness system are additionally installed. The projection of the roof above the bed makes it possible to protect the baby from drafts, sun rays and dust. In a set with furniture for children, a canopy in the form of a “crown” design is used, covering the cradle with a translucent canvas or partially covering the sleeping area of an ordinary bed.

The pendulum mechanism is used for good rocking of the child. The transverse pendulum swings the crib from side to side, while the longitudinal mechanism moves the sleeping area in the direction from the head to the foot. Another option is better. The cradle, due to its round shape, supports both mechanisms.

If you are concerned about the topic of a bunk bed with a work area for a teenager with a work area for a teenager. Follow the link.

How to choose a good crib

Nest for newborns - what is better to choose and how much does it cost?

Choosing a good transformable bed for your baby is very important. Mom and her child will have to use this item for a long time; it should be comfortable and reliable.

The following criteria will help you make the right choice:

Material. It is better to choose beech. It is the most durable. Pine will quickly become covered with scratches and gouges; it is not worth taking. Chipboard and laminated chipboard are also not suitable.
Dye. It must be non-toxic and certified for use for such purposes.
Fastenings. Plastic and wood will not work. All fasteners must be metal and must not be accessible to the baby.
Rods. They should be at a distance of approximately 10 cm from each other, so as not to pinch the child's hand or leg, but also not to miss the head. It is also good if the rods do not have corners.

Rods without corners

Quality. Furniture must be stable and strong. There should be no unplanned gaps. It is desirable that the assembly be as simple as possible.

Create a bed in 2 hours

A round bed is an unusual, but by no means unique piece of furniture. It's easier to build a frame for a purchased mattress rather than buy one. If you have the tools, this project should take no more than two hours.

Place the round mattress on top of a sheet of strong plywood (35 mm) so that no part of it overlaps it.
Using a pencil, draw a circle on the plywood along the contour.
Cut a circle of plywood along the line you drew.
Cut the boards (38mm) so that each is approximately three quarters the diameter of the circle.
Sand the face of the plywood. You can sand the other edges if you want, but it's not necessary.
Stain or apply a finish at this stage if you plan to paint the frame.
Join the two boards together in an L shape, positioning them flush, using two screws and angles.
Repeat step 7 with 2 other boards. You can also make a radial frame, positioning it from the center.
When creating the frame, use a drill slightly smaller than the diameter of the screws.
Center the board frame on the underside of the plywood.
Trace the outline with a pencil.
Drill inspection holes.
Place the plywood on top of the frame where it will lie.
Attach the bed base to the frame.
Complete your bedroom design by adding draperies, interesting wallpaper or decorative lamps to the wall.

Having learned how to make a round bed, you understand that there is nothing difficult about it. Although it will take a little work to find pillows and a mattress that match the design, the final look is worth it!

There are many more ways to make such a bed. For example, it could be a bean bag. For a nursery, it is decorated with toys to create the desired fun and playful atmosphere. Or they turn a little girl's bedroom into a princess room by making a four-poster bed.

8 in 1 round crib review

Bottles - which ones are best for newborns

Modifications of round and oval cribs for newborns are different: from 3 in 1 to 11 in 1. Today we will talk about the most popular option - 8 in 1. This means that from one set, gradually changing the composition of its parts, you can assemble:

Round cradle for a newborn;
Baby changing table;
An oval bed for an older child;
Manege;
Bed for children from 3-4 years old;
Add-on infant bed;
Two armchairs;
Table.

What are its advantages

The advantage of buying such furniture is obvious - it will last for a long time. While an ordinary classic crib will last a maximum of 3-4 years, a round transformer will be useful for up to 10-12 years, maybe longer if chairs with a table are used.

Some of the crib transformation options

Assembly instructions

Assemble the crib like this:

For a round cradle. Connect the quarters of a circle or half-arc and install the bottom. If necessary, screw on the wheels or install a pendulum.
Baby changing table. Assembled from a kit for extending the cradle, the bottom is located high on the free straight sides.
For an oval crib. The half-arcs unwind, and a straight side is placed between them. The mattress is changed, if necessary, the bottom is lowered.
Side bed. One straight side of the oval crib is removed, the resulting opening is located close to the parent's sleeping place. It is advisable to secure the connection using special straps.

Note! An additional cot can serve as a sofa for older children.

For the playpen. The bottom is lowered to the lowest possible position. Before this, the wheels and pendulum are removed.
Bed from 4 years. Straight sides are placed on one side (the other without fencing), the bottom is lengthened. For this modification, a new mattress is purchased. You can increase the sleeping area up to 175 cm.
Armchairs. The half-arcs are disconnected from each other. In the middle position, a half of the round bottom is installed, on which the pad is placed.
Table. It is assembled in the same way as a changing bag, but its surface is lower.

What transformation options does a round crib have?

A round bed has no corners that could cause injury. The child here feels protected, as if in the mother’s womb. Manufacturers send instructions in the set with the bed, allowing parents to choose on their own the acceptable mode of changing the furniture.

Common options for transforming a 6 in 1 bed:

A round cradle for a newborn with a lowering base for a place to sleep. By moving the bottom to the upper position, you can get a real changing table. This bed option is intended for children aged 0 to six months. The size of the sleeping area can be from 70 to 100 cm in diameter. You can install a canopy over the cradle.
Spacious round baby bed for children up to 3 years old. Due to additional details, the sleeping area can be expanded up to 120 cm in length. The width depends on the diameter of the cradle, in other words it can range from 70 to 90 cm. The height of the berth varies, and the fences are removed if necessary.
A free playpen can be obtained by moving the base of the berth to the lower position. The crib becomes a safe play space.
A children's sofa, into which the structure is transformed after one of the side rails is dismantled, will allow the child to spend his rest during the day. The width of the seat depends on the size of the sleeping area (120-160 cm). For added comfort, it is recommended to lean several pillows against the backrest.
Two armchairs and a table appear by separating the central crossbar and the side parts. Each chair is 70-90 cm wide and 35-45 cm deep and can support a weight of up to 90 kg.
An oval bed for children from 3 to 9 years old can be obtained by increasing the central crossbar. The width of the sleeping area remains the same, and the length can reach 140-165 cm.

The base is surrounded by sides on each side, which protect the child from falling out of the bed. During installation and unfolding, a small tool kit may be useful for tightening and unscrewing bolts.

By request, the next note will be on the topic of purchasing a bedside table or folding bed. We believe you will like it.

Cost of popular models

The price of oval and round cribs for newborns is not low, although justified - one set replaces many other purchases. The most famous manufacturers have set the following price for their goods[1]:

Ellipsebed, modification 5 in 1 – 25,000 rubles.

Ellipsbed bed in the interior

Round Stokke Sleepi Mini – 35,000, oval Stokke Sleepi – 55,000 rubles.
Giovanni Shapito Tree O 6 in 1 – 10,500 rubles.
Everflo Allure with a 7-in-1 pendulum – 13,000 rubles (without – 10,000 rubles).
Sweetbaby Delizia with a pendulum – 11,500 rubles (without rocking system – 9,000 rubles).

Round bed or classic: which is better?

Only parents can choose whether a round transformable crib for newborns is better or a classic one. The best option is considered to be the one that is safe and convenient for mom, dad and their child. If adults like timeless classics, if the design of a children's room involves using it, then there is no point in buying a transformer. In addition, not all parents can afford to buy such first furniture.

If you have the opportunity and desire to choose a modern, stylish and thoughtful option, then it will be the best solution.

The main thing is when choosing a crib for a newborn girl or a tiny boy, pay attention to the quality of the furniture. It is this criterion that should be dominant. In second place are budget and ease of use.

Number of transformations

Before purchasing furniture, you should consider the age at which you plan to use it. You will probably find some of the transformations offered by the manufacturer unnecessary. Therefore, it’s not worth overpaying for a model with them.

Ideally, the crib should have such transformations as a round or oval cradle for a child up to 6 months (some parts can be used as a changing table), an oval crib for a baby up to two or three years old, an additional crib with a removable side, a playpen, a children's playpen sofa.

There are often other transformations, for example, a bed turns into a table with chairs and a teenage model with a large sleeping area. However, not all transformations are included in the standard kit; some require the purchase of additional parts. Keep this in mind.